1. Introduction
This manual provides essential instructions for the safe and efficient operation of your Edison Professional Hummer M700 Portable Bluetooth Speaker. Please read this manual thoroughly before using the device and retain it for future reference.
Image 1.1: The Edison Professional Hummer M700 Portable Bluetooth Speaker. This image displays the speaker in a horizontal orientation, showcasing its cylindrical shape, black mesh grille, and control buttons on the top and side panel.
2. Product Features
The Edison Professional Hummer M700 is designed for portable audio enjoyment, offering a range of features:
- Dual 5-inch full-range speakers for clear audio output.
- Bluetooth connectivity for wireless audio streaming.
- Rugged rubber encased end caps for enhanced durability.
- Long-lasting 12-volt battery for extended playback.
- Integrated FM Radio tuner.
- USB input for media playback.
- SD card input for media playback.
- Auxiliary (AUX) input for wired connections.
- 5V 1A Power Bank functionality for charging external devices.
Image 2.1: A visual representation of the key features of the Edison Professional Hummer M700 speaker, including speaker size, power output, and input options.
3. Setup
3.1 Charging the Speaker
- Locate the charging port on the speaker.
- Connect the provided charging cable to the speaker and a suitable power source.
- The charging indicator light will illuminate. Allow the speaker to charge fully before first use.
3.2 Powering On/Off
- To power on, press and hold the Power button (①) until the speaker activates.
- To power off, press and hold the Power button (①) again until the speaker shuts down.
3.3 Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth mode. The Bluetooth indicator will flash.
- On your mobile device, enable Bluetooth and search for available devices.
- Select "Edison M700" from the list of devices.
- Once paired, the Bluetooth indicator will stop flashing and remain solid.
3.4 Connecting via AUX/USB/SD
- AUX Input: Connect a 3.5mm audio cable from your external device to the speaker's AUX port. The speaker will automatically switch to AUX mode or require manual selection via the Mode button.
- USB Input: Insert a USB flash drive containing audio files into the USB port. The speaker will automatically switch to USB mode and begin playback.
- SD Input: Insert an SD card containing audio files into the SD card slot. The speaker will automatically switch to SD mode and begin playback.
4. Operating Instructions
4.1 Basic Controls
- Volume Up (+): Press the '+' button to increase volume.
- Volume Down (-): Press the '-' button to decrease volume.
- Play/Pause (⏸): Press the Play/Pause button to play or pause audio.
- Next Track (⏭): Press and hold the '+' button to skip to the next track.
- Previous Track (⏮): Press and hold the '-' button to go to the previous track.
- Mode (M): Press the 'M' button to cycle through input modes (Bluetooth, FM, AUX, USB, SD).
- EQ: Press the 'EQ' button to cycle through available equalizer presets.
4.2 FM Radio Operation
- Switch to FM mode using the 'M' button.
- Press the Play/Pause button (⏸) to automatically scan and save available FM stations.
- Use the '+' and '-' buttons to navigate between saved stations.
4.3 Power Bank Functionality
To use the speaker as a power bank, connect your external device (e.g., smartphone) to the speaker's USB output port using a compatible charging cable. The speaker will provide 5V 1A output for charging.
5. Maintenance
5.1 Cleaning
- Ensure the speaker is powered off and disconnected from any power source before cleaning.
- Use a soft, dry cloth to wipe the exterior surfaces.
- Do not use liquid cleaners, aerosols, or solvents, as these may damage the finish or internal components.
5.2 Battery Care
- To prolong battery life, avoid fully discharging the battery frequently.
- Charge the speaker regularly, even if not in use, to maintain battery health.
- Do not expose the speaker to extreme temperatures, as this can affect battery performance.
5.3 Storage
When storing the speaker for extended periods, ensure it is fully charged and kept in a cool, dry place away from direct sunlight and moisture.
6. Troubleshooting
If you encounter issues with your Edison Professional Hummer M700 speaker, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Low battery; Power button not pressed correctly. | Charge the speaker fully. Press and hold the Power button for a few seconds. |
| No sound. | Volume too low; Incorrect input mode; Device not connected. | Increase volume. Press 'M' to select correct input mode. Ensure Bluetooth/AUX connection is secure. |
| Bluetooth pairing fails. | Speaker not in pairing mode; Device too far; Interference. | Ensure speaker is in Bluetooth mode and indicator is flashing. Move device closer. Turn off other Bluetooth devices. |
| FM radio reception is poor. | Weak signal; Environmental interference. | Relocate the speaker to an area with better reception. |
7. Specifications
Detailed technical specifications for the Edison Professional Hummer M700 speaker:
| Feature | Detail |
|---|---|
| Model | M700 |
| Speaker Size | Dual 5 Inches |
| Maximum Speaker Power Output | 150 Watts |
| Connectivity Technology | Bluetooth |
| Audio Output Mode | Stereo |
| Power Source | Battery Powered (Lithium Ion) |
| Control Method | App (via Bluetooth) / On-device buttons |
| Product Dimensions (L x W x H) | 14.61 cm x 9.14 cm x 7.32 cm |
| Item Weight | 2.29 kg |
| Special Features | Portable, FM Radio, USB/SD Playback, Power Bank |
| Included Components | 1 Edison Branded Unit |
Image 7.1: The Edison Professional Hummer M700 speaker with its physical dimensions clearly marked in centimeters.
8. Warranty and Support
8.1 Warranty Information
The Edison Professional Hummer M700 speaker comes with a warranty period of 90 days for parts and 1-year for labor from the date of purchase. Please retain your proof of purchase for warranty claims.
8.2 Customer Support
For technical assistance, warranty inquiries, or further information, please contact Edison Professional customer support. Refer to the official Edison Professional website for the most current contact details.
Image 8.1: The official logo for Edison Professional, indicating the brand of the speaker.
