Mi-Light FUT039 RGB+CCT LED Strip Lights & FUT092 Remote Controller User Manual

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Mi-Light FUT039 RGB+CCT LED Strip Lights and FUT092 Remote Controller system. Please read this manual carefully before use to ensure proper functionality and safety.

Product Features

• Wifi Enabled Smart Phone Control: Seamless control via smartphone app using 2.4Ghz wireless technology.
• Wireless 4-Zone Touch Remote Control: Control multiple lighting zones with a single remote, offering a control distance of at least 20 meters.
• 1.6 Million Colors & Dimmable: Choose from a vast spectrum of colors and adjust brightness from 100% down to 1%. Night light mode is also available.
• Brightness Adjusting: Precise brightness control from 1% to 100%.
• Stylish Design & Easy Operation: User-friendly design for intuitive control.
• Energy-Saving & Environment-Friendly: Designed for efficiency and recyclability.
• Flexible Control Options: The system can be controlled with the Color Temperature remote control or via iOS/Android App using a Wifi controller (WL-iBox required for app control).
• Remote/App Functionality: Once screwed into the light socket and powered on, the remote control/App can turn the LED bulb on/off, dim/brighten, and change color temperature.
• Multi-Zone Control: Control up to four different zones, change color, dim/brighten, and adjust warm/cool white settings.
• Dual Power Supply Modes: Supports DC 12-24V or power adapter interface 5.5*2.1mm.
• High Output Capacity: Max. load per route: 6A, total output current 10A.

Package Contents

The package includes the following components:

• 4 x FUT039 RGB+CCT LED Strip Controllers
• 1 x FUT092 4-Zone RGB+CCT Remote Controller

Image: Contents of the package, showing four FUT039 controllers and one FUT092 remote.

Product Parameters

Image: Detailed product parameters and dimensions for both the FUT039 controller and FUT092 remote.

Setup and Installation

Follow these steps to set up your LED strip light system:

1. Power Supply Connection: The FUT039 controller supports two power supply modes: DC 12V or 24V directly, or via a 5.5*2.1mm power adapter interface. Ensure the correct voltage is supplied to match your LED strips.
2. LED Strip Connection: Connect your RGB+CCT LED strip to the designated terminals on the FUT039 controller. Ensure correct polarity for V+, WW (Warm White), CW (Cool White), R (Red), G (Green), and B (Blue).
3. Controller Placement: Place the FUT039 controller in a suitable location, ensuring it is not exposed to moisture or extreme temperatures. The controller is designed with flame retardant material for safety.
4. Remote Control Pairing (if applicable): Before use, link the FUT039 controller to the FUT092 remote control. Refer to the "Operating Instructions" section for pairing details.
5. Optional Wi-Fi Control: For smartphone app control, an additional WL-iBox Wi-Fi controller (sold separately) is required. Connect the WL-iBox according to its own instructions and then link it with your FUT039 controllers.

Image: Details on power supply options, LED strip terminal connections, and the flame retardant material of the controller.

Image: A clear wiring diagram illustrating how to connect the LED strips to the FUT039 controller.

Operating Instructions

The FUT092 remote controller allows for comprehensive control of your LED strip lights.

Image: The FUT039 controller and FUT092 remote control shown together.

Remote Control Functions (FUT092)

• Power On/Off: Press the "O" button to turn on the lights, and the "I" button to turn off.
• Zone Selection: Use the numbered buttons "1", "2", "3", "4" to select the desired lighting zone.
• Color Ring: Touch the color ring to select from 1.6 million colors.
• Brightness Adjustment: Use the "S+" and "S-" buttons to increase or decrease brightness.
• Mode Selection: Press the "M" button to cycle through various dynamic modes (e.g., color fading, jumping).
• Speed Adjustment: When in a dynamic mode, use the "S+" and "S-" buttons to increase or decrease the speed of the mode.
• White Light/CCT Adjustment: The dedicated white light button or specific sections of the color ring allow adjustment of warm white and cool white tones.

Image: The FUT039 controller and FUT092 remote demonstrating the ability to select from 16 million colors.

Linking/Unlinking Controllers with Remote

To link a FUT039 controller to a zone on the FUT092 remote:

1. Ensure the FUT039 controller is powered off.
2. Power on the FUT039 controller.
3. Within 3 seconds of powering on, quickly press the "I" (On) button of the desired zone on the FUT092 remote 3 times.
4. The LED strip will flash 3 times slowly if linking is successful.

To unlink a FUT039 controller from a zone:

1. Ensure the FUT039 controller is powered off.
2. Power on the FUT039 controller.
3. Within 3 seconds of powering on, quickly press the "I" (On) button of the linked zone on the FUT092 remote 5 times.
4. The LED strip will flash 10 times quickly if unlinking is successful.

Maintenance

To ensure the longevity and optimal performance of your LED strip lights and controllers, follow these maintenance guidelines:

• Cleaning: Gently wipe the controllers and remote with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this can damage the electronic components.
• Environment: Keep the devices in a dry environment, away from direct sunlight, high humidity, and extreme temperatures. The FUT039 controller is rated for indoor use and is not water resistant.
• Power Supply: Always use the specified DC 12-24V power supply. Using an incorrect voltage can damage the controller and LED strips.
• Battery Replacement (FUT092 Remote): If the remote's performance degrades, replace the two AAA batteries. Ensure correct polarity when inserting new batteries.
• Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion.

Troubleshooting

If you encounter issues with your Mi-Light system, refer to the following common problems and solutions:

• Lights do not turn on:
  • Check if the power supply is correctly connected and providing the specified voltage (DC 12-24V).
  • Ensure the LED strip is properly connected to the FUT039 controller with correct polarity.
  • Verify that the FUT039 controller is linked to the correct zone on the FUT092 remote. Try re-linking if necessary.
  • Check the batteries in the FUT092 remote control.
• Remote control is unresponsive:
  • Replace the batteries in the FUT092 remote.
  • Ensure there are no obstructions between the remote and the controller.
  • Verify the remote is within the 30m control distance.
  • Re-link the controller to the remote.
• Colors are incorrect or inconsistent:
  • Check the wiring of the RGB+CCT LED strip to the controller to ensure all color channels (R, G, B, WW, CW) are correctly connected.
  • Ensure the correct type of LED strip (RGB+CCT) is being used with the FUT039 controller.
• Lights flicker or dim unexpectedly:
  • Check the power supply for stable voltage output.
  • Ensure the total current draw of the LED strip does not exceed the FUT039 controller's maximum output (10A total, 6A per channel).
  • Inspect connections for loose wires or corrosion.

Technical Specifications

Warranty and Support

This product is covered by a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact the manufacturer directly.

For technical support, troubleshooting assistance, or warranty claims, please contact lighteu customer service. You may also refer to the official lighteu website for additional resources and FAQs.

Optional protection plans are available for purchase, offering extended coverage beyond the standard warranty. Please refer to the product listing or contact your retailer for details on 3-Year, 4-Year, or Complete Protect plans.