MuzicLight MZR-101
MuzicLight Violin Wall Mount Viola Hanger Multicolor LED User Manual
Model: MZR-101 | Brand: MuzicLight
1. Product Overview
The MuzicLight Violin Wall Mount Viola Hanger is designed to securely display your violin or viola while providing ambient LED lighting. It features a robust construction with a steel headstock cradle and soft foam padding to protect your instrument. The integrated multicolor LED lights enhance the visual presentation of your instrument.

Image 1.1: The MuzicLight Violin Wall Mount Hanger illuminated with blue LED light, showcasing its design and functionality.
This hanger is suitable for most common violin and viola necks and is engineered to safely hold instruments weighing up to 35 pounds. It offers versatile power options, allowing operation via 2 AA batteries or a USB connection for continuous lighting.
2. Safety Information
- Ensure the wall surface is suitable for mounting and can support the weight of the hanger and your instrument. Recommended surfaces include concrete, brick, and wood studs.
- Always use appropriate mounting hardware and follow installation instructions carefully to prevent damage or injury.
- Do not exceed the maximum weight capacity of 35 pounds.
- Keep batteries out of reach of children. Dispose of used batteries responsibly.
- Avoid exposing the unit to excessive moisture or extreme temperatures.
3. Package Contents
Verify that all items are present in the package:
- MuzicLight Violin Wall Mount Hanger (1 unit)
- Mounting Hardware (screws, drywall anchors)
- AA Batteries (2 units, pre-installed or separate)
- Instruction Manual (this document)

Image 3.1: Visual representation of the items typically included in the MuzicLight package, such as the hanger unit, mounting hardware, and batteries.
4. Setup and Installation
Follow these steps to securely install your MuzicLight Violin Wall Mount Hanger:
- Choose Location: Select a suitable wall location, preferably a wall stud for maximum security. Ensure there is enough space for your instrument.
- Mark Drilling Points: Hold the hanger against the wall at the desired height. Use a pencil to mark the positions for the mounting screws.
- Drill Pilot Holes: Using an appropriate drill bit for your wall type (e.g., 3/16 inch for drywall anchors), drill pilot holes at the marked locations. If mounting into a wood stud, a smaller pilot hole may be sufficient.
- Insert Anchors (if needed): If drilling into drywall without a stud, gently tap the provided drywall anchors into the pilot holes until flush with the wall surface.
- Attach Hanger: Align the hanger's mounting holes with the drilled holes/anchors. Insert the screws and tighten them securely with a screwdriver until the hanger is firmly attached to the wall. Do not overtighten.
- Install Batteries: If using battery power, ensure 2 AA alkaline batteries are correctly inserted into the battery compartment. The batteries are typically included.
- Test Stability: Gently pull on the installed hanger to confirm it is stable and securely fastened before hanging your instrument.

Image 4.1: Detailed view of the MuzicLight unit, highlighting the USB power input, the control button for color changes and power, and the location of the LED lights.
The hanger features a back plate design, ensuring no exposed hardware is visible after installation, contributing to a clean aesthetic.
5. Operating Instructions
5.1 Hanging Your Instrument
The headstock cradle is made of solid steel with a foam coating to protect your instrument's finish. The angled cradle design ensures your violin or viola is held securely. To remove the instrument, lift it approximately 2 inches upwards from the cradle.

Image 5.1: This diagram shows the swivel mechanism of the hanger's posts, allowing adjustment for various instrument headstock shapes, both symmetrical and asymmetrical.
5.2 LED Lighting Control
The integrated LED lights offer multiple color options to illuminate your instrument. The lights are controlled by an on/off button located on the unit.
- Power On/Off: Press the control button once to turn the LED lights on or off.
- Change Color: While the lights are on, press the control button repeatedly to cycle through the available multicolor options (e.g., red, green, white, purple, blue).

Image 5.2: A series of MuzicLight hangers demonstrating the range of available LED colors, including red, green, blue, purple, and white, illuminating the wall behind the instrument.
5.3 Power Options
The MuzicLight hanger can be powered in two ways:
- AA Batteries: Two AA alkaline batteries (included) provide power for over 200 hours of illumination under normal usage. This offers wireless operation.
- USB Power: For continuous lighting, the unit can be powered via a USB connection. Connect a standard USB cable (not included) to the USB power input port on the hanger and to a compatible USB power source (e.g., wall adapter, power bank).

Image 5.3: Example of multiple instruments, including violins and a cello, elegantly displayed on a wall using MuzicLight hangers, showcasing the ambient lighting effect in a living space.
6. Maintenance
- Cleaning: Wipe the hanger with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents.
- Battery Replacement: When the LED lights dim or stop working, replace both AA batteries with new alkaline batteries. Ensure correct polarity.
- Foam Protection: Periodically inspect the foam padding on the headstock cradle for wear and tear. Replace the unit if the foam is significantly damaged to prevent scratching your instrument.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| LED lights do not turn on. |
|
|
| Lights are dim. |
|
|
| Hanger feels loose on the wall. |
|
|
8. Specifications
| Model Number | MZR-101 |
| Brand | MuzicLight |
| Color | Violin Multicolor |
| Material | Plastic (Body), Steel (Cradle) |
| Mounting Type | Wall Mount |
| Maximum Weight Capacity | 35 Pounds |
| Dimensions (L x W x H) | 6.48 x 4.5 x 2.97 inches |
| Item Weight | 10.5 ounces |
| Power Source | 2 AA Alkaline Batteries (included) or USB |
| Included Components | Mounting Hardware, 2 AA Batteries |
| Recommended Surfaces | Concrete, Brick, Wood |
| UPC | 680201831254 |
9. Warranty Information
The MuzicLight Violin Wall Mount Viola Hanger comes with a Lifetime Limited Warranty. This warranty covers defects in materials and workmanship under normal use. For specific terms, conditions, and to make a warranty claim, please refer to the warranty documentation included with your product or contact MuzicLight customer support.
10. Customer Support
For further assistance, technical support, or inquiries regarding your MuzicLight product, please visit the official MuzicLight store or contact their customer service department.
- MuzicLight Store: Visit the MuzicLight Store on Amazon
- Manufacturer: Muziclight
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.