Roborock S6 Robot Vacuum User Manual

Introduction

The roborock S6 Robot Vacuum is a versatile robotic cleaning device designed to efficiently vacuum and mop your home. Featuring adaptive routing, multi-floor mapping, and selective room cleaning, it offers a comprehensive and convenient cleaning solution. Its super strong suction ensures deep cleaning, while its extra-long battery life allows for extensive coverage. The roborock S6 also works seamlessly with Alexa for voice control.

Key features include:

• Astonishingly efficient: Using adaptive routing with edge optimized cleaning, S6 gives you comprehensive room cleaning fast.
• Multi-floor Mapping: Save multiple maps, along with No-go Zones for each level, all recognized automatically by the robot.
• Convenient Selective Room Cleaning: Choose which rooms to be clean, and schedule cleaning for specific rooms.
• Powerful clean and Easy mopping: Intense suction, cleans deep into carpets and cracks in the floor. Get your floors gleaming with a quick mop.
• Quiet and convenient: With a cleaning volume of just 67db (equivalent to a typical conversation) in Balanced mode, you can clean any time day or night without disruption.

Setup Guide

Before first use, ensure your roborock S6 is properly set up and charged. Follow these steps:

1. Unpack the Robot: Carefully remove the robot vacuum and all accessories from the packaging.
2. Place the Charging Dock: Position the charging dock against a wall on a hard, level surface. Ensure there is at least 0.5 meters (1.6 feet) of clear space on both sides and 1.5 meters (4.9 feet) in front of the dock. Connect the power cable to the dock and plug it into a power outlet.
3. Charge the Robot: Place the robot onto the charging dock. The power indicator light will turn on, indicating that the robot is charging. For first-time use, fully charge the robot before operation.
4. Download the App: Search for "Roborock" in your mobile app store (App Store or Google Play) and download the official app.
5. Connect to Wi-Fi: Open the Roborock app and follow the on-screen instructions to connect your robot vacuum to your home Wi-Fi network. This will enable smart features like multi-floor mapping and selective room cleaning.

Figure 1: Roborock S6 Robot Vacuum and Charging Dock.

Figure 2: The Roborock S6 supports multi-floor mapping, allowing it to recognize and clean different levels of your home.

Figure 3: Utilize the app for convenient selective room cleaning, scheduling specific areas for the robot to clean.

Operating Instructions

The roborock S6 is designed for intelligent and efficient cleaning. Here's how to operate it:

• Start Cleaning: Press the power button on the robot or use the "Clean" button in the Roborock app to start a cleaning cycle. The robot will automatically map your home and plan the most efficient cleaning path.
• Adaptive Routing: The S6 uses advanced algorithms to determine the fastest and most comprehensive cleaning route for each room, ensuring no spots are missed.
• Powerful Suction: Experience intense suction that effectively cleans deep into carpets and removes debris from cracks in hard floors.
• Mopping Function: Attach the mopping cloth and fill the water tank to enable the mopping feature. The robot will then vacuum and mop simultaneously, leaving your floors gleaming.
• Quiet Operation: In Balanced mode, the S6 operates at a low noise level of 67db, allowing for discreet cleaning day or night without disturbance.

Figure 4: The robot utilizes adaptive routing to calculate the fastest and most efficient cleaning path for each room.

Figure 5: The powerful suction of the Roborock S6 effectively pulls up every speck of dirt, even from deep within carpets.

Figure 6: The Roborock S6 operates quietly, allowing you to clean any time of day or night without disruption.

Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your roborock S6. Perform these tasks regularly:

• Empty the Dustbin: Empty the 460ml dustbin after each cleaning cycle or when full. To access, lift the top cover of the robot.
• Clean the Filter: The filter should be washed periodically. Remove it from the dustbin and rinse under running water. Allow it to air dry completely before reinserting.
• Clean the Main Brush: Regularly check the main brush for tangled hair or debris. Use the provided cleaning tool to cut and remove any entangled material.
• Clean the Side Brush: Inspect the side brush for debris and ensure it spins freely. Remove any tangled hair or foreign objects.
• Clean Sensors: Wipe the cliff sensors, wall sensors, and charging contacts with a soft, dry cloth to ensure proper operation.
• Clean the Mopping Cloth: After each mopping session, remove and wash the mopping cloth. It can be hand-washed or machine-washed on a gentle cycle.

Figure 7: Lift the top cover to access the dustbin for emptying and filter cleaning.

Troubleshooting

If you encounter issues with your roborock S6, refer to the following common troubleshooting tips:

For more detailed troubleshooting or persistent issues, please refer to the official user manual or contact roborock customer support.

Specifications

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official roborock website or the comprehensive User Manual (PDF) provided with your product.

You can also visit the roborock Store on Amazon for additional product information and support resources.