Introduction
Thank you for choosing the Dayllon Kids Digital Watch. This watch is designed for active children aged 3-15, featuring a durable build and multiple functions suitable for outdoor sports and daily wear. It includes a dual time display, alarm clock, stopwatch, LED luminous backlight, calendar, and is 50M waterproof. Please read this manual carefully to understand the watch's features and proper operation.
Figure 1: Front view of the Dayllon Kids Digital Watch, showcasing its blue digital display and robust design.
Watch Components and Buttons
Familiarize yourself with the watch's buttons and display elements:
Figure 2: Diagram illustrating the location and function of each button on the watch.
- LIGHT Button: Activates the LED backlight for illumination.
- MODE Button: Cycles through different modes (Time, Stopwatch, Alarm, Date).
- START/STOP Button: Used to start and stop the stopwatch, and adjust settings in various modes.
- RESET Button: Resets the stopwatch, and used for setting adjustments.
Setup and Initial Configuration
Setting Time and Date
- In normal time display mode, press the MODE button three times to enter time setting mode. The seconds will flash.
- Press the RESET button to set the seconds to zero.
- Press the START/STOP button to move to the next setting item (hour, minute, month, date, day of week).
- Use the RESET button to adjust the flashing value.
- Once all settings are complete, press the MODE button to return to normal time display.
12/24 Hour Format Selection
In time setting mode (after pressing MODE three times), press the RESET button when the hour is flashing to toggle between 12-hour (AM/PM) and 24-hour formats.
Operating Instructions
Using the Stopwatch
- From normal time display, press the MODE button once to enter stopwatch mode.
- Press the START/STOP button to start the stopwatch.
- Press START/STOP again to pause the stopwatch.
- Press the RESET button to reset the stopwatch to zero.
- Press the MODE button to exit stopwatch mode.
Setting the Alarm
- From normal time display, press the MODE button twice to enter alarm setting mode. The hour will flash.
- Press the RESET button to adjust the hour.
- Press the START/STOP button to move to the minute setting.
- Press the RESET button to adjust the minute.
- Press the MODE button to confirm and exit alarm setting mode.
Turning Alarm On/Off and Chime
- In normal time display, press and hold the RESET button and then press the START/STOP button to toggle the alarm on or off. An alarm icon will appear/disappear.
- To activate/deactivate the hourly chime, press and hold the MODE button and then press the RESET button. The chime icon will appear/disappear.
Using the LED Backlight
Press the LIGHT button at any time to illuminate the display. The light will stay on for a few seconds.
Maintenance and Care
Water Resistance (50M / 5ATM)
The Dayllon Kids Digital Watch is designed with 50 meters (5ATM) water resistance. This means it is suitable for:
- Hand washing
- Splashes and rain
- Showering (cold water only, avoid hot water)
- Swimming in shallow water
Important: Do NOT press any buttons while the watch is wet or submerged. Avoid using the watch in hot water, saunas, or during diving activities, as this can compromise the water seal.
Figure 3: Rear view of the watch, displaying the 5ATM water resistance marking.
Cleaning and Storage
- Clean the watch regularly with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and then dry thoroughly.
- Avoid using chemical cleaners, as they can damage the watch's materials.
- Store the watch in a cool, dry place away from direct sunlight and extreme temperatures.
Battery Replacement
The watch uses 1 AAA battery. When the display dims or functions become erratic, it may be time to replace the battery. Battery replacement should ideally be performed by a qualified technician to ensure the water resistance seal is maintained.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is dim or blank. | Low battery. | Replace the battery. |
| Time is incorrect. | Time not set correctly or accidental button press. | Refer to "Setting Time and Date" section to reset the time. |
| Alarm does not sound. | Alarm is turned off. | Ensure the alarm function is activated (alarm icon visible). |
| Water inside the watch. | Buttons pressed underwater, exposure to hot water/steam, or seal damage. | Stop using the watch immediately. Seek professional repair to prevent further damage. |
Specifications
Figure 4: Detailed product parameters and dimensions of the watch.
- Model: 1266
- Brand: Dayllon
- Movement: Digital
- Mirror Material: Resin
- Case Material: ABS (Acrylonitrile Butadiene Styrene)
- Band Material: PU (Polyurethane)
- Buckle Material: Stainless Steel
- Water Resistance: 50M (5ATM)
- Product Dimensions: 0.98 x 0.87 x 0.67 inches
- Item Weight: 3.53 ounces
- Functions: Time, Chronograph (Stopwatch), Alarm, Date, Week, LED Luminous Backlight, 12/24 Hour Format.
- Battery Type: 1 AAA battery (required)
Warranty and Support
Dayllon is committed to providing high-quality products. For any questions, concerns, or support needs regarding your Dayllon Kids Digital Watch, please contact our customer service. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.
For further assistance, please visit the official Dayllon store on Amazon: Dayllon Store
