Sigma 441969
Sigma 28mm f/1.4 DG HSM Art Lens User Manual
Model: 441969
Introduction
Thank you for purchasing the Sigma 28mm f/1.4 DG HSM Art Lens. This high-performance wide-angle prime lens is designed for professional and enthusiast photographers seeking exceptional optical quality and versatility. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your new lens. Please read this manual thoroughly before using the lens.
Product Overview
Familiarize yourself with the various parts of your Sigma 28mm f/1.4 DG HSM Art Lens.




- Focus Ring: Used for manual focusing.
- Distance Scale: Indicates the current focus distance.
- AF/MF Switch: Toggles between autofocus and manual focus modes.
- Lens Mount Index: Aligns with the camera body's mount index for proper attachment.
- Lens Hood Mount: For attaching the supplied lens hood.
Setup
Attaching the Lens
- Ensure both the camera and lens are clean and free of dust.
- Remove the rear lens cap and the camera body cap.
- Align the lens mount index mark (usually a white dot or line) on the lens with the corresponding index mark on your camera body.
- Insert the lens into the camera mount and rotate it clockwise (for L-Mount) until it clicks into place. Do not force the lens.
Detaching the Lens
- Turn off the camera.
- While pressing the lens release button on the camera body, rotate the lens counter-clockwise until it stops.
- Carefully remove the lens from the camera body.
- Attach the front and rear lens caps to protect the lens elements.
Attaching the Lens Hood
The supplied lens hood helps to block extraneous light and reduce flare. Align the red dot on the lens hood with the red dot on the front of the lens, then twist the hood clockwise until it locks into place. To remove, twist counter-clockwise while pressing the release button on the hood.
Operation
Autofocus (AF)
Set the AF/MF switch on the lens to "AF". The lens will automatically focus when the camera's autofocus system is activated (e.g., by pressing the shutter button halfway). Refer to your camera's manual for specific autofocus settings and modes.
Manual Focus (MF)
Set the AF/MF switch on the lens to "MF". Rotate the focus ring on the lens to adjust focus manually. Use your camera's focus peaking or magnification features for precise manual focusing.
Manual Override (MO)
This lens supports Manual Override (MO), allowing you to fine-tune focus manually even when the lens is set to AF, without needing to switch to MF mode. This feature is active when the camera is set to AF-S (Single-shot AF) mode.
Aperture Control
The aperture (f-number) is controlled via your camera body. Consult your camera's instruction manual for details on setting the aperture.
Maintenance
Cleaning the Lens
- Use a blower brush to remove dust from the lens surface.
- For smudges or fingerprints, use a clean, soft microfiber cloth specifically designed for optical lenses. Breathe lightly on the lens surface before gently wiping in a circular motion from the center outwards.
- For stubborn marks, apply a small amount of lens cleaning solution to the cloth (never directly to the lens) and wipe gently.
- Do not use organic solvents such as paint thinner or benzene to clean the lens.
Storage
- When not in use, store the lens with both front and rear caps attached in a cool, dry, and well-ventilated place, away from direct sunlight and high humidity.
- Avoid storing the lens near mothballs or chemicals that may emit volatile gases.
- If storing for an extended period, it is recommended to place the lens in an airtight container with a desiccant to prevent mold growth.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lens not attaching to camera | Incorrect alignment; obstruction on mount. | Ensure index marks are aligned. Check for debris on lens or camera mount. Do not force. |
| Autofocus not working | AF/MF switch set to MF; camera AF mode incorrect; insufficient light/contrast. | Set AF/MF switch to AF. Check camera AF settings. Ensure adequate lighting and subject contrast. |
| Images are blurry | Incorrect focus; camera shake; dirty lens element. | Verify focus. Use a faster shutter speed or tripod. Clean lens elements. |
| Lens makes unusual noise | Normal operation (e.g., AF motor); internal issue. | Some noise from the AF motor is normal. If noise is excessive or accompanied by malfunction, contact customer support. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Sigma customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Sigma |
| Model Number | 441969 |
| Focal Length | 28 millimeters (Fixed) |
| Maximum Aperture | f/1.4 |
| Lens Type | Wide-angle Prime |
| Compatible Mounts | Leica L-Mount |
| Focus Type | Autofocus |
| Product Dimensions | 13.21 x 8.13 x 8.13 cm (5.2 x 3.2 x 3.2 inches) |
| Item Weight | 1.5 kg (3.3 lbs) |
| Included Components | Lens, Lens Hood, Front Lens Cap, Rear Lens Cap |
Warranty and Support
For information regarding warranty, returns, or repairs, please refer to the official Sigma website or contact your local authorized Sigma dealer. Specific warranty terms may vary by region and purchase location.
If you wish to return a product within 30 days of receipt because you have changed your mind, please consult the Amazon return policy page. If you have received a defective or damaged product, please consult the Amazon help page on defective or damaged items. For specific information on purchases made through the Marketplace, please consult the Amazon help page for Marketplace purchases.
For technical support or service inquiries, please visit the Sigma Official Store or contact Sigma customer service directly.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.







