Introduction
Thank you for choosing the SUPERDANNY Power Strip Tower Surge Protector. This versatile charging station is designed to provide convenient power access and comprehensive protection for your electronic devices in various environments, including home and office settings. Its vertical design optimizes space, while multiple outlets and USB ports ensure all your devices can be powered simultaneously. Please read this manual thoroughly before use to ensure safe and optimal operation of your device.
Safety Information
- Keep away from water: To prevent electric shock, do not expose the power strip to water or any liquids. Do not use in wet environments.
- Do not disassemble or modify the device. Refer all servicing to qualified personnel.
- Ensure the total power consumption of connected devices does not exceed the maximum rating of the power strip (1625W/13A).
- Do not use the power strip with damaged cords or plugs.
- Avoid placing the power strip in direct sunlight or near heat sources.
- Keep out of reach of children.
- Unplug the power strip from the wall outlet when not in use for extended periods.
Product Features
The SUPERDANNY Power Strip Tower Surge Protector offers a range of features designed for convenience and safety:
- Multi-Outlets: Features 9 AC outlets and 4 smart-charging USB ports (max 2.4A/port, 4.5A shared) for powering multiple devices simultaneously.
- Advanced Multifunctional Protection: Includes surge protection (1080J), over-current, over-voltage, overload, overheat, and short-circuit protection.
- Fire-Resistant Casing: Constructed with ABS + PC fire-resistant material, rated UL94 V-0 for highest fire resistance.
- Master Switch: A convenient master switch on the top allows you to power on/off all connected devices with ease.
- Space-Saving Vertical Design: Compact tower design fits well in limited spaces, reducing cord clutter.
- Long Extension Cord: Equipped with a 10 ft (9.8 ft) heavy-duty extension cord for flexible placement.
Setup
Follow these simple steps to set up your Power Strip Tower:
- Unpack: Carefully remove the power strip from its packaging.
- Placement: Choose a stable, dry location for the power strip, away from direct sunlight, heat sources, and water. Ensure adequate ventilation.
- Plug In: Insert the power strip's 3-prong plug firmly into a grounded wall outlet.
- Connect Devices: Plug your electronic devices into the available AC outlets and USB ports. Ensure plugs are fully inserted.
- Power On: Press the master switch on the top of the tower to power on the unit. The indicator light will illuminate.
Operating Instructions
Using your SUPERDANNY Power Strip Tower is straightforward:
- Master Power Switch: The large button on the top of the tower acts as a master switch. Press it once to turn on power to all outlets and USB ports. Press it again to turn off power. This is useful for conserving energy and quickly disconnecting multiple devices.
- AC Outlets: The tower features 9 standard AC outlets. These are designed with wide spacing to accommodate larger power adapters without blocking adjacent outlets.
- USB Charging Ports: The 4 USB ports (2 USB-A and 2 USB-C) provide smart charging capabilities, automatically detecting your device's power requirements for optimal charging speed, up to 2.4A per port, with a shared maximum of 4.5A.
- Surge Protection Indicator: A small LED indicator light (often green) on the unit confirms that the surge protection is active and functioning. If this light is off, the surge protection may have been compromised, and the unit should be replaced.
Note: There are no official product videos from the seller available for embedding at this time.
Maintenance
To ensure the longevity and safe operation of your power strip:
- Cleaning: Disconnect the power strip from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
- Inspection: Periodically inspect the power cord and the unit for any signs of damage, such as fraying, cuts, or unusual heat. If damage is found, discontinue use and replace the unit.
- Storage: When not in use, store the power strip in a cool, dry place, away from extreme temperatures.
Troubleshooting
If you encounter issues with your SUPERDANNY Power Strip Tower, refer to the following table:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to outlets/USB ports. | Master switch is off. Power strip is not plugged in. Overload protection tripped. | Press the master switch to turn on. Ensure the power strip is securely plugged into a live wall outlet. Unplug some devices, then press the reset button (usually on the bottom/back of the unit) to restore power. |
| Devices not charging via USB. | USB cable is faulty. Device is not compatible. Total USB current exceeds 4.5A. | Try a different USB cable. Ensure your device is compatible with USB charging. Disconnect some USB devices to reduce the load. |
| Surge protection indicator light is off. | Surge protection has been compromised. | The surge protection capacity has been used up. The unit will still function as a power strip but without surge protection. It is recommended to replace the unit for continued surge protection. |
Specifications
| Brand | SUPERDANNY |
| Model | SD-T0904-C2 |
| Product Dimensions | 5.5 x 5.5 x 6.1 inches |
| Item Weight | 1.62 pounds |
| Total Power Outlets | 9 AC Outlets |
| USB Ports | 4 (2 USB-A, 2 USB-C) |
| USB Output | Max 2.4A per port, 4.5A shared |
| Surge Protection | 1080 Joules |
| Voltage | 110 Volts |
| Cord Length | 10 ft (9.8 ft) |
| Fire Resistance Rating | UL94 V-0 |
Warranty and Support
For warranty information, product support, or to purchase protection plans, please visit the official SUPERDANNY store or contact customer service.
Official Brand Store: SUPERDANNY Store on Amazon
Protection Plans: Additional protection plans are available for purchase, including 2-Year and 3-Year options, as well as a "Complete Protect" monthly plan. Details can be found on the product's purchase page.
