Introduction
Thank you for purchasing the Veho TA-8 Universal Smartphone Holder with Wireless Qi Charging. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device. The Veho TA-8 is designed to securely hold your smartphone in your vehicle while providing convenient wireless charging.
Key Features:
- Universal in-car smartphone holder with wireless Qi charging capability.
- Compatible with all smartphone brands and models that support Qi wireless charging.
- Features an automatic open/close system for one-handed operation, activated by a built-in sensor.
- Includes both a suction cup mount for windshields and a clip for air vent attachment.
Image: The Veho TA-8 holder with a smartphone being placed into it, illustrating the automatic grip and wireless charging function.
Package Contents
Please check the box for the following items:
- Veho TA-8 Wireless Charging Smartphone Holder
- Suction Cup Mount
- Air Vent Clip Mount
- USB-C Charging Cable
- User Manual (this document)
Setup
Mounting Options:
The Veho TA-8 offers two primary mounting options for your vehicle:
1. Suction Cup Mount (Windshield/Dashboard)
- Clean the desired mounting surface (windshield or smooth dashboard area) thoroughly to ensure a strong suction.
- Attach the main holder unit to the ball joint of the suction cup mount. Tighten the collar to secure it.
- Press the suction cup firmly against the clean surface and push down the lever on the base to create a vacuum seal.
- Adjust the angle of the holder for optimal viewing.
Image: The Veho TA-8 holder connected to its suction cup mount, ready for installation.
Image: The Veho TA-8 holder mounted on the suction cup arm, showing its adjustable extension.
2. Air Vent Clip Mount
- Attach the main holder unit to the ball joint of the air vent clip mount. Tighten the collar to secure it.
- Carefully slide the air vent clip onto one of your vehicle's air vent blades. Ensure it is securely fastened.
- Adjust the angle of the holder for optimal viewing.
Image: The air vent clip mount, designed for easy attachment to vehicle air vents.
Power Connection:
Connect the provided USB-C charging cable to the port on the bottom of the Veho TA-8 holder and plug the other end into a USB power source in your vehicle (e.g., car charger, USB port). For optimal wireless charging performance, use a QC 2.0/3.0 compatible car charger.
Operating Instructions
Automatic Open/Close System:
The Veho TA-8 features an infrared sensor that detects when a phone is approaching. When a phone is brought close to the holder, the side arms will automatically open. Once the phone is placed in the holder, the arms will automatically close and secure the device.
- To place your phone: Bring your phone close to the holder. The arms will open. Place your phone into the holder, ensuring it rests on the bottom support. The arms will then close automatically.
- To remove your phone: Touch the sensor area (usually on the side or bottom of the holder, refer to product diagram if available) to trigger the arms to open. Remove your phone. The arms will close automatically after a few seconds if no phone is detected.
Image: A smartphone securely held in the Veho TA-8 mount, displaying a navigation application, demonstrating its use in a vehicle.
Wireless Qi Charging:
Once your phone is securely placed in the holder and the holder is powered, wireless charging will begin automatically if your phone supports Qi wireless charging. An indicator light on the holder may illuminate to confirm charging status.
- Ensure your phone is centered on the charging pad for optimal charging efficiency.
- Thick phone cases or cases with metal components may interfere with wireless charging.
Image: A smartphone charging wirelessly in the Veho TA-8 holder, attached to an air vent, with the battery icon indicating charging.
Maintenance
To ensure the longevity and optimal performance of your Veho TA-8 holder, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to wipe down the holder. Do not use abrasive cleaners or solvents, as they may damage the surface.
- Suction Cup: If the suction cup loses its grip, rinse it with warm water and let it air dry. This can restore its adhesive properties.
- Storage: When not in use for extended periods, store the holder in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Obstruction: Ensure the automatic opening/closing mechanism is free from dust or debris that could impede its movement.
Troubleshooting
If you encounter issues with your Veho TA-8, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Holder not powering on/charging. | No power connection or faulty cable/charger. | Ensure the USB-C cable is securely connected to both the holder and a working USB power source. Try a different cable or car charger. |
| Wireless charging not working. | Phone not Qi-compatible, misaligned, or thick case. | Verify your phone supports Qi wireless charging. Re-position the phone to ensure it's centered. Remove thick or metallic phone cases. Ensure the power source provides sufficient wattage (e.g., 10W). |
| Automatic arms not opening/closing. | Sensor obstructed or power issue. | Check if the sensor area is clean and unobstructed. Ensure the holder is powered on. |
| Suction cup not sticking. | Dirty surface or suction cup. | Clean the mounting surface and the suction cup. Rinse the suction cup with warm water and let it air dry before re-applying. |
If the problem persists after trying these solutions, please contact Veho customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | VAA-014-TA8 |
| Product Dimensions | 12.6 x 15 x 7 cm |
| Item Weight | 224 Grams |
| Connectivity Technology | Infrared (for automatic sensor) |
| Connector Type | USB-C |
| Compatible Devices | Smartphones (Qi-enabled) |
| Compatible Phone Models | Google Nexus: 4, 5, 6, 7 (2013); Apple iPhone: 8, 8 Plus, X; Samsung Galaxy: S9, S9+, Note 5, Note 8, S8, S8+, S7, S7 Active S7 Edge, S6, S6 Edge; Microsoft Lumia: 1520, 1020, 930, 929, 928, 920; LG: V30, G6 (US version only), G4 (optional), G3 (optional) |
| Special Feature | Wireless Charging, Automatic Clamp |
| Total USB Ports | 1 |
| Wattage | 10 Watts |
| Manufacturer | Veho |
| Country of Origin | Germany |
Image: Front view of the Veho TA-8 holder, showing its design and branding.
Image: Rear view of the Veho TA-8 holder, displaying technical specifications and certifications.
Warranty & Support
Specific warranty information for the Veho TA-8 is not provided in this document. For details regarding warranty coverage, returns, or technical support, please refer to the official Veho website or contact your retailer.
You can typically find support information and contact details on the manufacturer's official website:
