1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Olideauto DSW120 Automatic Swing Door Opener. Please read this manual thoroughly before installation and use to ensure proper function and safety. This system is designed for assisted accessibility in both residential and commercial buildings, offering automatic and manual operation.
2. Safety Information
Always prioritize safety during installation and operation. Ensure all power is disconnected before performing any maintenance or installation steps. The system features automatic re-opening if an object is detected in the closing path, enhancing user safety. For active protection, consider purchasing an optional safety motion sensor (ASIN: B07BGV6QRX) to prevent door closure when someone is within range.
3. Package Contents
Verify that all components are present before beginning installation:
- Olideauto DSW120 Swing Door Opener Unit
- 2 x Wireless Handicap Push Buttons
- Handheld Programmer
- Power Cable
- Mounting Hardware (screws, spacers, Allen wrenches)
- Push Arm and Pull Arm (for inswing and outswing applications)
- Wireless Receive Controller (Model: Olide-510F)
4. Setup and Installation
The DSW120 is designed for easy installation. It supports both inswing and outswing door configurations. Ensure the mounting surface is stable and capable of supporting the unit's weight.
4.1 Unboxing and Component Overview
Familiarize yourself with the components inside the box. The main unit consists of a motor, gearbox, and controller. The package includes both push and pull arms to accommodate different door opening directions.
4.2 Mounting the Main Unit
The main unit should be mounted securely above the door frame. The mounting plate is the first component to install. Mark the top edge of the mounting plate to ensure correct orientation. Ensure the unit is level for proper operation.
4.3 Arm Installation (Push Arm vs. Pull Arm)
Select the appropriate arm (push or pull) based on your door's opening direction. The push arm is used when the door opens away from the operator, and the pull arm is used when the door opens towards the operator. Ensure the arm is installed at a 90-degree angle to the door when fully closed for optimal performance. Refer to the manual's diagrams for precise measurements.
4.4 Electrical Connections
The DSW120 operates with a wide voltage range of AC100V to AC240V. Connect the AC power to the designated terminals on the unit. It is recommended to connect a ground wire. For push buttons, use solid core 18-gauge wire for reliable connections. The wireless receiver connects to the main unit to enable communication with the push buttons.
4.5 Wireless Handicap Push Buttons
The kit includes two wireless square handicap push buttons. These buttons utilize 2.4G wireless communication technology for stable and consistent performance. They can be configured for both wireless and wired modes.
4.6 Installation Video
Video: This video provides a comprehensive guide to the installation of the Olideauto Low Energy ADA Electric Swing Door Operators, demonstrating the steps involved in setting up the system.
5. Operating Instructions
The DSW120 can be operated via the wireless push buttons or programmed using the handheld programmer.
5.1 Handheld Programmer
All parameters of the automatic swing door can be easily set via the handheld programmer. This includes opening/closing speeds, manually open force, opening direction, hold-on open time, and lock modes.
5.2 Remote Control Encoding
Video: This video demonstrates the process of encoding the wireless remote control with the Olideauto DSW120 automatic door opener, ensuring proper synchronization for remote operation.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your DSW120 unit. Keep the unit clean and free from obstructions. Periodically check all mounting screws and connections for tightness. Ensure the door moves freely without excessive friction. If using wireless push buttons outdoors, ensure they are protected from rain to prevent battery failure.
7. Troubleshooting
- Door not opening/closing: Check power connections, ensure push buttons are properly paired, and verify all settings with the handheld programmer.
- Door re-opens unexpectedly: Check for obstructions in the door path. If an optional safety motion sensor is installed, ensure it is clean and correctly calibrated.
- Wireless push buttons not responding: Check battery levels in the push buttons. Ensure the wireless receiver is properly connected and within range (max 10 meters).
- Door movement is too fast/slow: Adjust the opening and closing speeds using the handheld programmer.
8. Specifications
| Feature | Detail |
|---|---|
| Installation Type | Screw-In |
| Recommended Uses | Assisted accessibility in residential and commercial buildings, easy manual opening for general use |
| UPC | 763891906041 |
| Manufacturer | Chinentech Industrial Limited |
| Part Number | de-door-16h-61 |
| Item Weight | 23.1 pounds |
| Product Dimensions | 21.45 x 3.35 x 3.74 inches |
| Maximum Weight Capacity | 264 Pounds |
| Batteries Required? | No |
| Material | Alloy Steel, Metal |
| Color | Rose Metal |
| Exterior Finish | Rose Metal |
| Swing Application | One-way inswing or outswing open, single leaf and double leaf standard doors |
| Voltage | 110-220 VAC +/-10% |
| Motor | DC 24V brushless motor |
| Power Consumption | 50W |
| Opening Time | 3-7 sec. @ 90 degrees |
| Hold Open Time | 1-30 sec. Adjustable |
| Max. Door Frame Depth | 200mm / 7.87" (with push arm) |
| Door Width | Max. 1200mm / 47.2" Min. 660mm / 26" |
| Max. Opening Angle | 120 degrees |
| Environment Temperature | -20C to 50C (-4F to 122F) |
| Operation Noise | Less than 55db |
9. Warranty and Support
Olideauto offers a 60-month product warranty. USA Technical Phone Support is available for assistance with installation and debugging. For any issues, please contact customer support.