ReplacementScrews Wall Mount Screw Kit for Samsung UN58MU6070 TV

Introduction

This manual provides essential information for the proper installation and use of the ReplacementScrews Wall Mount Screw Kit, specifically designed for Samsung UN58MU6070 series televisions. This kit ensures a secure and VESA-compatible connection between your television and a wall mount.

The kit includes all necessary hardware: M8 screws, flat washers, split lock washers, and nylon spacers, all finished with black oxide for corrosion resistance and a professional appearance.

Package Contents

Verify that all components listed below are present in your package:

• 4x M8 Screws: Metric screws with a length and thread compatible with Samsung UN58MU6070.
• 4x Flat Washers: Provide a larger bearing surface for the screw head, distributing pressure.
• 4x Split Lock Washers: Exert pressure to prevent screws from loosening due to vibrations.
• 4x Nylon Spacers: Offer additional length configurations and create space for cables behind the TV.

Image: Complete set of M8 screws, flat washers, split lock washers, and nylon spacers.

Setup and Installation

Before beginning installation, ensure you have the correct wall mount for your television and that it is VESA compatible. Always consult your television's user manual and your wall mount's installation guide for specific instructions and safety precautions.

Required Tools (Not Included):

• Appropriate screwdriver (e.g., Phillips head, depending on screw head type)
• Wall mount (VESA compatible)
• Drill (if required for wall mount installation)

Installation Steps:

1. Prepare the TV: Carefully place your Samsung UN58MU6070 television face down on a soft, clean surface to protect the screen.
2. Identify Mounting Holes: Locate the four VESA mounting holes on the back of your television.
3. Attach Wall Mount Brackets: Align the wall mount brackets with the VESA mounting holes on the TV.
4. Select Hardware:
   • For each mounting point, use one M8 screw, one split lock washer, and one flat washer.
   • If additional spacing is required for cable management or to ensure proper fit with your specific mount, insert a nylon spacer between the TV and the wall mount bracket before inserting the washers and screw.
   

   Image: M8 screw with flat and split lock washers.
   

   Image: M8 screws with nylon spacers and washers.

5. Secure the Screws: Insert the M8 screws through the wall mount bracket, then through the flat washer, split lock washer, and into the TV's mounting holes. Tighten securely with an appropriate screwdriver. Do not overtighten, as this can damage the TV or the screws.
6. Final Check: Ensure all four screws are firmly tightened and the wall mount brackets are securely attached to the television.
7. Mount the TV: Proceed with mounting the television to the wall according to your wall mount's specific instructions.

Important Safety Note: Always ensure the wall mount itself is securely installed into appropriate wall studs or anchors capable of supporting the weight of your television. If you are unsure about any step, consult a professional installer.

Operating

These screws are passive components designed for secure mounting. No operational steps are required for these mounting screws once installed. Their function is to maintain a stable connection between the television and the wall mount.

Maintenance

The black oxide plating on these screws provides corrosion resistance, minimizing the need for maintenance. Periodically, it is recommended to visually inspect the screws and the mounting connection to ensure they remain secure. If any loosening is observed, carefully re-tighten the screws without overtightening.

Troubleshooting

Most issues related to TV mounting are due to incorrect installation of the wall mount itself or improper selection of screws. This kit provides M8 screws specifically for the Samsung UN58MU6070. If you encounter issues:

• Screws do not fit: Double-check your TV model and ensure it is a Samsung UN58MU6070. Verify that the mounting holes on your TV are indeed M8. Consult your TV manual.
• TV feels unstable: Ensure all screws are tightened securely. Verify that the wall mount is correctly installed into structural supports (e.g., wall studs).
• Insufficient space for cables: Utilize the included nylon spacers to create additional clearance between the TV and the mount.

If problems persist, consult a professional installer or contact ReplacementScrews customer support.

Specifications

Support

For further assistance, questions regarding installation, or product inquiries, please contact ReplacementScrews customer support. Refer to the product packaging or the retailer's website for contact information.

You can also visit the ReplacementScrews Store on Amazon for more information.