ReplacementScrews Stand Screws Instruction Manual

1. Introduction

This manual provides instructions for the installation and proper use of ReplacementScrews stand screws, designed for securing the original factory stand to compatible Samsung televisions. These screws are engineered for a precise fit and are made with the correct metric thread to prevent damage to your stand or TV.

2. Product Components

Each kit contains a complete set of eight black self-tapping metric screws, specifically designed for attaching the original factory legs/stand to your television.

Image 2.1: Overview of the eight black self-tapping screws included in the kit.

3. Compatibility

These screws are specifically designed for use with the original factory stand of the Samsung UN55J6201 (UN55J6201AFXZA) television model. It is crucial to verify your TV's model number, typically found on a label on the back of the television, to ensure full compatibility prior to installation.

4. Installation Instructions

Follow these steps to securely attach the television stand using the provided screws. It is recommended to have assistance when handling large televisions.

1. Preparation: Place the television screen-down on a soft, clean, and stable surface (e.g., a blanket or foam padding) to prevent scratches or damage.
2. Identify Mounting Points: Locate the designated screw holes on the back of the television and on the stand components.
3. Align Stand: Carefully align the stand components with the corresponding mounting points on the television.
4. Insert Screws: Insert the provided screws into the appropriate holes. Ensure the screws are straight before tightening.
5. Tighten Screws: Using a compatible screwdriver, tighten the screws securely. Avoid overtightening, as this can strip the threads or damage the plastic components of the TV or stand. The coarse self-tapping screws are designed to go into plastic holes or receivers using minimal torque.
6. Verify Stability: Once all screws are tightened, carefully lift the television and place it on a flat, stable surface to ensure the stand is securely attached and the TV is stable.

Image 4.1: Close-up of a screw head, indicating the Phillips drive type for proper tool selection.

5. Usage Guidelines

• For Stands Only: This screw kit is specifically designed for attaching the original factory legs or stand to your TV. It is not to be used for universal stands or wall mounting applications, as those typically require different screw types and lengths.
• Material and Finish: The screws are made from carbon steel and feature a black oxide plating. This finish provides resistance to corrosion and matches the aesthetic of the television.
• Durability: These screws are designed for durability, resisting breaking or stripping during installation, which contributes to the secure attachment of the television to its stand.

Image 5.1: Side view of a screw, highlighting the coarse self-tapping threads.

6. Product Specifications

7. Troubleshooting

• Screws do not fit: Verify that your television model is precisely Samsung UN55J6201 (UN55J6201AFXZA). These screws are model-specific. Do not attempt to force screws into incompatible holes, as this can cause irreversible damage.
• Screws are loose after installation: Ensure all screws are tightened sufficiently. If a screw continues to feel loose or spins freely, it may indicate stripped threads in the TV or stand. In such cases, do not continue to tighten; contact support for guidance.
• Missing screws: Confirm that all eight screws were received. If any are missing, contact customer support for a replacement.

8. Support Information

For further assistance, inquiries, or to report any issues regarding your ReplacementScrews product, please contact the manufacturer directly. You can find more information and contact details by visiting the official ReplacementScrews Store on Amazon.