1. Introduction
This manual provides detailed instructions for the proper installation of ReplacementScrews stand screws for your Samsung UN50NU7200 (UN50NU7200FXZA) television. These screws are specifically designed to securely attach the original factory stand legs to your TV. Please read all instructions carefully before proceeding with installation.
2. Product Overview
The ReplacementScrews kit includes a complete set of four black self-tapping machine screws, precisely sized and threaded for compatibility with the Samsung UN50NU7200 TV stand. These screws feature a black oxide plating for corrosion resistance and a consistent aesthetic with your television.
Image 2.1: The complete set of four black stand screws included in the kit.
Image 2.2: Close-up view of a single black self-tapping machine screw, showing the head and threading.
3. Setup and Installation
Follow these steps to correctly install the stand legs onto your Samsung UN50NU7200 television.
- Verify TV Model: Before beginning, confirm that your television model is Samsung UN50NU7200 or UN50NU7200FXZA. This model number is typically found on a label on the back of your TV.
- Prepare the TV: Carefully place your television screen-down on a soft, clean, and stable surface to prevent damage. Ensure the surface is large enough to support the TV safely.
- Position Stand Legs: Align the original factory stand legs with the designated mounting holes on the bottom of your television. Refer to your TV's original manual for specific leg orientation if unsure.
- Insert Screws: Take one of the provided ReplacementScrews. Insert it into the screw hole on the stand leg and align it with the corresponding threaded hole on the TV.
- Tighten Screws: Using an appropriate screwdriver (typically a Phillips head), carefully tighten each screw. Turn clockwise until the screw is snug and the stand leg is firmly attached. Do not overtighten, as this can strip the threads or damage the TV casing.
- Repeat for all Legs: Repeat steps 4 and 5 for all remaining stand legs and screws. Ensure all four screws are securely fastened.
- Final Check: Once all screws are installed, gently lift the TV and place it upright on a stable surface. Lightly test the stability of the stand to ensure it is firm and secure before connecting power or other cables.
Important Note:
These screws are designed exclusively for attaching the original factory stand legs to the specified Samsung TV model. They are not suitable for universal TV stands or wall mounting applications, which typically require different types and sizes of fasteners.
4. Specifications
| Feature | Detail |
|---|---|
| Material | Alloy Steel |
| Head Style | Flat |
| Exterior Finish | Black Oxide |
| Fastener Size | M6 x 25mm |
| Number of Pieces | 4 |
| Set Screw Thread Type | Self-Tapping |
5. Troubleshooting
Screws Do Not Fit or Are Too Short
If you encounter issues where the screws do not seem to fit or are too short, please take the following actions:
- Re-verify TV Model: Double-check the exact model number on the back of your Samsung television. Ensure it is UN50NU7200 or UN50NU7200FXZA. Incorrect model identification is the most common reason for compatibility issues.
- Check for Obstructions: Ensure there are no plastic caps, debris, or other obstructions in the TV's screw holes that might prevent the screws from fully engaging.
- Confirm Stand Type: These screws are for original factory stands only. If you are using a universal stand or a wall mount, different hardware is required.
- Contact Support: If you have verified the model and stand type and the screws still do not fit, please contact ReplacementScrews customer support for further assistance.
6. Warranty and Support
ReplacementScrews products are manufactured to high-quality standards. For any questions regarding installation, product compatibility, or if you require assistance, please refer to the contact information provided with your purchase or visit the official ReplacementScrews website. Please retain your proof of purchase for any support inquiries.