Introduction
The Moen 187053 Magnetix Shower Head Adapter is a durable replacement or upgrade component designed for use with Moen Magnetix tub and shower systems. This adapter provides a secure magnetic docking mechanism for your handheld shower, enhancing flexibility and ease of use. Constructed with a primary metal connection and a robust magnetic holder, it ensures reliable performance and a stable shower experience.
Image: The Moen 187053 Magnetix Shower Head Adapter in Chrome finish.
Setup and Installation
Follow these steps for proper installation of your Moen 187053 Magnetix Shower Head Adapter. Ensure all necessary tools are available before beginning.
- Prepare the Area: Turn off the main water supply to your shower. If replacing an existing adapter, carefully remove it. Clean any debris or old sealant from the shower arm threads.
- Apply Plumber's Tape: Wrap plumber's tape (thread seal tape) clockwise around the threads of your shower arm. Apply 3-5 wraps to ensure a watertight seal.
- Install the Adapter: Ensure the rubber gasket is properly seated inside the Moen 187053 adapter. Thread the adapter onto the shower arm. Hand tighten the adapter firmly. If necessary, use a wrench for an additional quarter turn, but avoid overtightening, as this can damage the threads or the adapter.
- Attach Shower Head: Connect your compatible Moen Magnetix handheld shower head to the adapter's magnetic docking port.
- Test for Leaks: Turn the main water supply back on. Check all connections for any signs of leaks. If leaks occur, turn off the water, re-tighten connections, or reapply plumber's tape/gaskets if necessary.
Operating Instructions
The Moen 187053 Magnetix Shower Head Adapter is designed for intuitive use with your Moen Magnetix handheld shower. Its primary function is to securely hold the handheld shower when not in use and allow for easy detachment and reattachment.
- Docking the Handheld Shower: Simply bring the handheld shower head close to the adapter's magnetic surface. The strong magnet will guide and secure the shower head into place.
- Detaching the Handheld Shower: Gently pull the handheld shower head away from the adapter.
- Adjusting Angle: The adapter allows for a range of motion, enabling you to pivot and angle the shower head to your preferred position.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your Moen 187053 Magnetix Shower Head Adapter.
- Cleaning: Clean the adapter regularly with a soft cloth, warm water, and a mild, non-abrasive soap. Avoid using harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the chrome finish and magnetic components.
- Inspect for Leaks: Periodically check the connection points for any signs of water leaks. Address any leaks promptly by re-tightening connections or replacing plumber's tape/gaskets if necessary.
- Magnetic Surface: Keep the magnetic docking surface clean and free of mineral buildup or soap residue to ensure a strong and secure hold for your handheld shower.
Troubleshooting
If you encounter issues with your Moen 187053 Magnetix Shower Head Adapter, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Water leaks from connections | Loose connection, insufficient plumber's tape, damaged gasket. | Turn off water supply. Re-tighten connections. Apply more plumber's tape. Ensure gasket is properly seated and undamaged. |
| Handheld shower not docking securely | Magnetic surface is dirty or obstructed. | Clean the magnetic surface of both the adapter and the handheld shower head with a soft cloth. |
| Limited range of motion | Mineral buildup in swivel joint. | Clean the swivel joint area. If persistent, consider applying a small amount of silicone-based lubricant (safe for plumbing) to the joint. |
Specifications
- Brand: Moen
- Model Number: 187053
- Material: Metal (primary construction)
- Finish Type: Chrome
- Item Weight: 4.8 ounces
- Product Dimensions: 4.1 x 2.9 x 2.4 inches
- Installation Type: Wall Mounted
- UPC: 026508281116
Warranty and Support
Moen products are manufactured under the highest standards of quality and workmanship. This product is backed by Moen's Limited Lifetime Warranty against leaks, drips, and finish defects to the original consumer purchaser. For complete warranty details, product support, or to order replacement parts, please visit the official Moen website or contact Moen customer service directly.
Moen Official Website: www.moen.com
