Important Safety Information
Warning: Please read this manual carefully and keep it for future reference. Failure to follow these instructions can result in serious injury or property damage.
- Always ensure the spa is placed on a flat, level surface capable of supporting the weight of the filled spa and occupants.
- Do not use extension cords. Connect the spa directly to a grounded electrical outlet.
- Keep children under supervision at all times when near the spa.
- Do not operate the spa if the water temperature exceeds 40°C (104°F).
- Avoid using electrical appliances near the spa.
Product Overview
The Bestway Lay-Z-Spa AirJet Tahiti is an inflatable hot tub designed for relaxation and hydrotherapy. It features a durable TriTech material construction, an integrated AirJet massage system, and LED lighting. This spa is suitable for 2 to 4 adults and can heat water up to 40 degrees Celsius.
Image: The Lay-Z-Spa Tahiti hot tub, showcasing its design and compact form.
Key Features:
- Easy and quick setup in approximately 10 minutes.
- Constructed with durable TriTech material.
- Integrated LED lighting system.
- Heats water up to 40°C (104°F).
- Energy-saving timer included.
- Equipped with 81 AirJet massage jets.
Package Contents
Ensure all items listed below are present in your package:
- One Lay-Z-Spa Hot Tub
- One Spa Cover
- One Spa Pump
- One Filter Cartridge
- One ChemConnect Dispenser
- One LED Light
- Repair Patch
Setup Instructions
1. Site Selection
Choose a flat, level surface free from sharp objects. Ensure the area can support the weight of the filled spa and occupants. An outdoor power outlet should be nearby and protected from moisture.
2. Unpacking and Inflation
Carefully remove all components from the packaging. Unfold the spa liner and connect the inflation hose from the pump to the spa's inflation valve. Inflate the spa until it is firm but not over-inflated.
Image: A person inflating the Lay-Z-Spa Tahiti using the included pump.
3. Pump Connection
Connect the spa pump unit to the spa liner following the instructions in the diagram. Ensure all connections are secure to prevent leaks.
Image: The Lay-Z-Spa Tahiti with its protective cover and pump unit, ready for use.
4. Filling the Spa
Fill the spa with fresh water to the recommended fill line. Do not overfill.
Image: A person filling the Lay-Z-Spa Tahiti with water using a garden hose.
Operating Instructions
1. Powering On and Heating
Plug the spa pump into a grounded electrical outlet. Press the power button on the control panel. Use the temperature adjustment buttons to set your desired water temperature. The heating system will automatically turn off when the set temperature is reached.
2. AirJet Massage System
Press the AirJet button on the control panel to activate the massage jets. The system will release bubbles from the bottom of the spa, providing a relaxing massage. Press the button again to turn off the AirJet system.
Image: The Lay-Z-Spa Tahiti in operation, showing the AirJet bubbles providing a massage.
3. LED Lighting
Activate the integrated LED lighting system by pressing the light button on the control panel. Cycle through different colors or modes as desired.
Image: The Lay-Z-Spa Tahiti illuminated with its integrated blue LED lighting system at night.
4. Energy-Saving Timer
Use the energy-saving timer function to schedule the spa's heating cycle. This allows you to set the spa to heat up at a specific time, reducing energy consumption.
Maintenance
1. Water Treatment with ChemConnect
The included ChemConnect dispenser helps maintain clean and healthy water by distributing chemical tablets. Place appropriate chemical tablets (not included) into the dispenser and attach it to the spa's outlet nozzle.
Image: Close-up of the ChemConnect dispenser, designed for easy chemical distribution.
2. Filter Cartridge Cleaning and Replacement
Regularly clean the filter cartridge by rinsing it with a garden hose. Replace the filter cartridge every few weeks, or more frequently depending on usage, to ensure optimal water filtration.
3. Spa Cover Usage
Always use the spa cover when the spa is not in use. This helps to retain heat, prevent debris from entering the water, and improve energy efficiency.
Image: The insulated cover for the Lay-Z-Spa Tahiti, designed to retain heat and protect the spa.
4. Draining and Storage
When preparing to store the spa, drain all water completely. Clean and dry the spa thoroughly before deflating and folding it for storage in a dry, protected area.
Troubleshooting
Common Issues and Solutions:
- Spa not heating: Check power connection, ensure filter is clean, verify temperature setting.
- AirJet not working: Ensure pump is powered on, check for blockages in air jets.
- Water quality issues: Adjust chemical levels using the ChemConnect dispenser, clean or replace filter cartridge.
- Leaks: Inspect the spa liner for punctures. Use the provided repair patch for minor leaks.
For more detailed troubleshooting, refer to the full manual or contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Bestway |
| Model Name | AirJet Tahiti |
| Model Number | 54186 |
| Color | Grey Tahiti |
| Material | Polyvinyl Chloride (PVC) |
| Item Weight | 33 Kilograms |
| Shape | Round |
| Seating Capacity | 2-4 Adults |
| Water Capacity | 669 Liters |
| Number of AirJets | 81 |
| Max. Water Temperature | 40°C (104°F) |
| Assembly Required | No (Quick Setup) |
| Smart Home Compatibility | Not Smart Home Compatible |
Warranty Information
Bestway products are manufactured to high-quality standards and undergo rigorous testing. This product is covered by a limited warranty against manufacturing defects. Please refer to the warranty card included in your package or visit the official Bestway website for detailed warranty terms and conditions.
Support
For further assistance, product information, or to purchase replacement parts, please visit the official Bestway website or contact Bestway customer service.
You can also visit the Bestway Store on Amazon for more information.