LUXPRO XP1814 Pro Series 1300 Lumen Directional Pivoting Work Light User Manual

1. Safety Information

Please read all safety instructions before using the LUXPRO XP1814 work light. Failure to follow these instructions may result in electric shock, fire, or serious injury.

Battery Safety: Use only the specified battery type (6 C batteries). Do not mix old and new batteries, or different types of batteries. Insert batteries with correct polarity (+/-). Remove batteries if the device will not be used for an extended period.
Light Exposure: Do not stare directly into the LED light. The high intensity light can cause temporary vision impairment or eye damage.
Heat: The light may become warm during prolonged use. Avoid direct contact with the LED panel when operating.
Water Resistance: This product is not water resistant. Avoid exposure to water or high humidity to prevent damage.
Children: Keep out of reach of children. This is not a toy.
Disassembly: Do not attempt to disassemble, modify, or repair the light. Contact customer support for service.

2. Product Overview

The LUXPRO XP1814 is a versatile, battery-powered work light designed for various applications, offering bright illumination and flexible positioning.

LUXPRO XP1814 Pro Series 1300 Lumen Directional Pivoting Work Light

Figure 2.1: LUXPRO XP1814 Work Light, front view showing the LED panel and triangular base.

Key Features:

225-degree directional pivoting broadbeam LED light.
Integrated magnets for attachment to metal surfaces.
Built-in hook for hanging.
Two brightness settings: High (1300 lumens) and Low (460 lumens).
Battery-operated, requiring 6 C batteries for up to 40 hours of use.
Durable construction with gripping rubber accents.

3. Setup

3.1 Battery Installation

The XP1814 work light requires 6 C-cell alkaline batteries (not included).

Locate the battery compartment cover on the side of the light.
Unscrew or unlatch the cover to open the compartment.
Insert 6 C-cell batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
Securely close the battery compartment cover.

LUXPRO XP1814 Work Light with battery compartment visible

Figure 3.1: Illustration of the battery compartment area on the LUXPRO XP1814.

4. Operating Instructions

4.1 Power On/Off and Brightness Modes

The power button is located on the side of the light. Press the button to cycle through the modes:

First press: High mode (1300 lumens).
Second press: Low mode (460 lumens).
Third press: Off.

LUXPRO XP1814 Work Light in use, showing bright illumination

Figure 4.1: The XP1814 providing bright illumination in a work setting.

LUXPRO XP1814 Brightness and Runtime Chart

Figure 4.2: Brightness, runtime, and beam distance specifications for High and Low modes.

4.2 Pivoting Head Adjustment

The LED panel can pivot up to 225 degrees, allowing you to direct light precisely where needed. Gently adjust the light panel to your desired angle.

LUXPRO XP1814 Work Light with pivoting head

Figure 4.3: Demonstrating the 225-degree pivoting capability of the light head.

4.3 Magnetic Base and Hook Usage

The XP1814 features a strong magnetic base and an integrated hook for hands-free operation.

Magnetic Base: Attach the light to any ferrous metal surface. Ensure the surface is clean and strong enough to support the light's weight.
Integrated Hook: Extend the hook from the top of the light to hang it from overhead structures, ropes, or other suitable points.

LUXPRO XP1814 Work Light attached to a metal surface using its magnetic base

Figure 4.4: The magnetic base allows for hands-free placement on metal surfaces.

5. Maintenance

5.1 Cleaning

Wipe the exterior of the light with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the light is off and batteries are removed before cleaning.

5.2 Battery Replacement

Replace all 6 C-cell batteries when the light output diminishes significantly or the light stops functioning. Refer to Section 3.1 for battery installation instructions.

5.3 Storage

Store the work light in a cool, dry place away from direct sunlight. Remove batteries if storing for extended periods to prevent leakage and damage to the device.

6. Troubleshooting

Problem	Possible Cause	Solution
Light does not turn on.	Batteries are dead or low. Batteries are inserted incorrectly. Battery compartment cover is not fully closed.	Replace with new C-cell batteries. Check battery polarity and reinsert correctly. Ensure the battery compartment cover is securely fastened.
Light is dim.	Batteries are low. Light is in Low mode.	Replace with new C-cell batteries. Press the power button to switch to High mode.
Light flickers.	Loose battery connection. Batteries are nearly depleted.	Check battery compartment and ensure batteries are snug. Replace with new C-cell batteries.

7. Specifications

Feature	Detail
Model Number	XP1814
Brightness (High)	1300 Lumens
Brightness (Low)	460 Lumens
Run Time (High)	Up to 12 hours
Run Time (Low)	Up to 40 hours
Beam Distance (High)	62 meters
Beam Distance (Low)	35 meters
Power Source	Battery Powered (6 C-cell Alkaline)
Voltage	9 Volts
Light Source Type	LED
Material	Plastic
Product Dimensions	4.5"D x 8.25"W x 4.5"H
Item Weight	1.34 Pounds
Special Features	Portable, 225° Pivoting Head, Magnetic Base, Integrated Hook
Water Resistance Level	Not Water Resistant

8. Warranty and Support

8.1 Limited Warranty

The LUXPRO XP1814 work light comes with a limited 90-day warranty against manufacturer's defects. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accident, unauthorized modification, or neglect.

8.2 Customer Support

For warranty claims, technical assistance, or any questions regarding your LUXPRO XP1814 work light, please contact LUXPRO customer support. Refer to the official LUXPRO website or product packaging for the most current contact information.

You can visit the LUXPRO store for more information: LUXPRO Store

LUXPRO XP1814