Strivy 9A-1.5A-5525BK

Strivy 9V Charger for Hurricane Spin Scrubber Brush

Model: 9A-1.5A-5525BK

Introduction

This user manual provides essential information for the safe and effective use of your Strivy 9V Charger. This charger is specifically designed to power and recharge compatible Hurricane Spin Scrubber Brush models, including HSS1, HSSI, and JF-DY085030. Please read this manual thoroughly before using the product to ensure proper operation and longevity.

Product Overview

Figure 1: The Strivy 9V Charger unit, featuring a compact design with an integrated power cable and barrel connector.

Close-up of 5.5x2.1mm barrel connector with positive polarity diagram

Figure 2: Detail of the 5.5x2.1mm barrel connector, indicating positive polarity. The cable length is approximately 5.5 feet (1.5 meters).

The Strivy 9V Charger is a reliable power adapter designed for specific Hurricane Spin Scrubber Brush models. It features a standard US plug, a durable cable, and a barrel connector for secure attachment to your device. The charger is built with multiple safety protections to ensure safe and efficient charging.

Product Demonstration Video

Video 1: A 29-second overview of the Strivy 9V Charger, displaying its physical characteristics and the included cable.

Specifications

Feature	Detail
Model Number	9A-1.5A-5525BK
Input Voltage	100-240V
Output Voltage	9V (Compatible with 7V, 8.5V, 9V)
Maximum Output Current	1.5A (Compatible with 1.5A, 1A, 0.3A, 0.8A)
Cable Length	5.5 feet (1.5 meters)
DC Connector Size	5.5*2.1/2.5mm
Compatible Devices	Hurricane Spin Scrubber Brush models: HSS1, HSSI, JF-DY085030, JFDY085030
Safety Features	Over-voltage protection (OVP), Over-load protection (OCP), Over-current protection (OCP), Short-circuit protection (SCP)
Product Dimensions	4.72 x 1.18 x 3.15 inches
Item Weight	2.08 ounces

Diagram illustrating safety features: OVP, OCP, OTP, SCP

Figure 3: The charger incorporates multiple safety features including Over-Voltage Protection (OVP), Over-Current Protection (OCP), Over-Temperature Protection (OTP), and Short-Circuit Protection (SCP).

Setup

Verify Compatibility: Ensure your Hurricane Spin Scrubber Brush requires a 9V charger. This charger is incompatible with models requiring a 5V charging voltage. Compatible models include HSS1, HSSI, JF-DY085030, and JFDY085030.
Connect to Device: Insert the barrel connector of the Strivy 9V Charger firmly into the charging port of your Hurricane Spin Scrubber Brush.
Connect to Power Outlet: Plug the charger's AC prongs into a standard 100-240V wall outlet or power strip.

Strivy charger connected to a Hurricane Spin Scrubber Brush

Figure 4: The Strivy 9V Charger connected to a Hurricane Spin Scrubber Brush, illustrating the proper connection for charging.

Strivy charger plugged into a power strip

Figure 5: The charger plugged into a power strip, demonstrating how it can be used with various power sources.

Operating Instructions

Once connected, the Hurricane Spin Scrubber Brush should indicate that it is charging (e.g., via an indicator light).
Allow sufficient time for the device to fully charge. Charging times may vary depending on the battery level of your scrubber.
The charger is designed with built-in protections against over-voltage, over-load, over-current, and short circuits, ensuring safe charging.
Disconnect the charger from the device and the power outlet once charging is complete or when the device is not in use.

Maintenance

Keep the charger and its cable clean and dry. Avoid exposure to moisture or extreme temperatures.
Do not bend or crimp the cable excessively, as this can damage the internal wires.
Store the charger in a cool, dry place when not in use.
Regularly inspect the charger and cable for any signs of damage, such as frayed wires or cracked casing. Discontinue use if damage is observed.

Troubleshooting

Problem	Possible Cause / Solution
Device not charging	Ensure the charger is securely plugged into both the device and a working power outlet. Verify that your Hurricane Spin Scrubber Brush model is compatible with a 9V charger. This charger is not compatible with 5V models. Check the charger cable and connector for any visible damage. Try plugging the charger into a different power outlet to rule out an issue with the outlet.
Charger feels hot during use	It is normal for chargers to become slightly warm during operation. If the charger becomes excessively hot or emits a burning smell, immediately unplug it and discontinue use. Contact support.

Support

For any questions, concerns, or technical assistance regarding your Strivy 9V Charger, please contact the seller directly through your order platform. Providing your order details will help expedite the support process.

For more information about Strivy products, you may visit the official Strivy Store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.