1. Introduction
This manual provides essential information for the safe and efficient use of your ENERGETIC A19 LED Light Bulb. Please read these instructions carefully before installation and operation, and retain them for future reference.
Figure 1: ENERGETIC A19 LED Light Bulbs (4-pack).
2. Safety Information
- Risk of Electric Shock: Always turn off power to the fixture before installing, removing, or inspecting the bulb.
- Indoor Use Only: This bulb is designed for indoor use in dry and damp locations. Do not use in wet locations or where directly exposed to water.
- Non-Dimmable: This LED bulb is non-dimmable. Do not use with dimmer switches, as this may damage the bulb or cause malfunction.
- Operating Voltage: Ensure the fixture's voltage is compatible with the bulb's specifications (AC-120V).
- Fixture Compatibility: Use in fixtures designed for A19 shape bulbs with an E26 medium base.
- Emergency Exits: Not suitable for use in emergency exit fixtures or emergency lights.
- Shatter Resistant: While designed to be shatter resistant, handle with care to prevent damage.
3. Setup & Installation
- Turn Off Power: Before installation, ensure the power to the light fixture is turned off at the circuit breaker or wall switch.
- Remove Old Bulb (if applicable): Carefully unscrew the existing light bulb from the fixture. Allow it to cool if it was recently in use.
- Screw in New Bulb: Gently screw the ENERGETIC A19 LED Light Bulb into the E26 medium base socket. Do not overtighten.
- Restore Power: Turn the power back on at the circuit breaker or wall switch.
- Test: Turn on the light switch to ensure the bulb is functioning correctly.
Figure 2: Bulb dimensions and E26 base type for proper installation.
4. Operating Instructions
The ENERGETIC A19 LED Light Bulb is designed for simple operation. Once installed in a compatible fixture with power restored, it will illuminate instantly when the light switch is turned on.
- Instant On: The bulb provides full brightness immediately upon switching on.
- Non-Dimmable: This bulb is not compatible with dimmer switches. Attempting to use it with a dimmer may cause flickering, damage, or shorten its lifespan.
- Light Color: This model provides 3000K Warm White light, offering a comfortable and inviting ambiance.
Figure 3: Illustration of various color temperatures, highlighting 3000K Warm White.
5. Maintenance
ENERGETIC A19 LED Light Bulbs require minimal maintenance due to their long lifespan and durable construction.
- Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Replacement: Replace the bulb when it reaches the end of its operational life. Follow the installation steps in Section 3.
6. Troubleshooting
If you experience issues with your ENERGETIC A19 LED Light Bulb, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. | No power to the fixture, loose connection, or faulty bulb. | Check the circuit breaker and wall switch. Ensure the bulb is screwed in tightly. Test the bulb in another working fixture. If still not working, the bulb may be faulty. |
| Bulb flickers. | Incompatible dimmer switch, loose connection, or voltage fluctuation. | Ensure the bulb is not connected to a dimmer switch (this bulb is non-dimmable). Tighten the bulb. Check for stable power supply. |
| Light is too dim. | Incorrect bulb wattage equivalent for desired brightness. | Verify the lumen output (760LM) meets your lighting needs. This bulb is a 60W incandescent equivalent. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | ENERGETIC SMARTER LIGHTING |
| Model Number | YGA03A41-A19-9W-3000K |
| Light Type | LED |
| Wattage | 8 Watts |
| Incandescent Equivalent | 60 Watts |
| Bulb Shape Size | A19 |
| Bulb Base | E26 Medium Base |
| Light Color | Warm White (3000 Kelvin) |
| Brightness | 760 Lumens |
| Voltage | 120 Volts (AC-120V) |
| Color Rendering Index (CRI) | 80 |
| Beam Angle | 180 degrees |
| Average Life | 15,000 Hours |
| Special Features | Energy Efficient, Flicker-Free, Instant On, Long Lasting, Shatter Resistant |
| Certification | ETL Listed |
| Product Dimensions | 2.36"W x 4.29"H |
Figure 4: Energy saving comparison between Energetic LED and standard incandescent bulbs.
8. Warranty & Support
ENERGETIC SMARTER LIGHTING is committed to providing quality products.
- Quality Guarantee: If you encounter any quality issues with your bulbs or are unsatisfied with your purchase, please contact us directly for assistance.
- Contact Information: For support, please refer to the contact details provided on the product packaging or the official ENERGETIC SMARTER LIGHTING website.