Introduction
Thank you for choosing the KEMEI Hair Trimmer KM-5026. This manual provides essential information for the safe and effective operation, maintenance, and care of your new hair trimmer. Please read these instructions thoroughly before first use and retain them for future reference.
Important Safety Instructions
To reduce the risk of electric shock, injury, or fire, always follow these basic safety precautions:
- Read all instructions before using this appliance.
- Keep the appliance dry. Do not use it near water or in wet conditions.
- Do not reach for an appliance that has fallen into water. Unplug immediately.
- Unplug this appliance before cleaning.
- Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities.
- Use this appliance only for its intended household use as described in this manual.
- Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged.
- Keep the cord away from heated surfaces.
- Never drop or insert any object into any opening.
- Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
- Always attach the plug to the appliance first, then to the outlet. To disconnect, turn all controls to OFF, then remove the plug from the outlet.
- The appliance is equipped with a rechargeable battery. Do not expose to excessive heat.
- Fully charge the hair trimmer before using it for the first time to ensure optimal performance and battery longevity.
Package Contents
Please check the package contents upon unboxing. If any items are missing or damaged, contact customer support.
- KEMEI Hair Trimmer KM-5026 (Red)
- USB Charging Cable (Note: USB wall adapter is not included)
- Guide Combs (1mm, 2mm, 3mm, 4mm)
- Cleaning Brush
Product Overview
The KEMEI Hair Trimmer KM-5026 is a cordless, rechargeable grooming tool designed for precise hair trimming and shaving. It features a durable T-blade for close cuts and operates with low noise.
Key Features:
- Cordless Operation: Provides flexibility and ease of use without being tethered to an outlet.
- Rechargeable Battery: Equipped with a Lithium Polymer battery for sustained power.
- 0mm T-Blade: Designed for ultra-short, precise cuts and detailing without irritating the skin.
- Low Noise Design: Operates quietly, making it suitable for use around sensitive individuals.
- Multiple Guide Combs: Includes 1mm, 2mm, 3mm, and 4mm combs for various hair lengths.
Charging the Trimmer
The KEMEI Hair Trimmer KM-5026 is equipped with a rechargeable Lithium Polymer battery. For optimal performance and battery life, ensure the trimmer is fully charged before its first use.
- Locate the charging port at the bottom of the trimmer.
- Insert the small end of the provided USB charging cable into the trimmer's charging port.
- Connect the USB-A end of the cable to a compatible USB power source (e.g., a computer USB port, a USB wall adapter, or a power bank). Note: A USB wall adapter is not included in the package.
- The "CHARGE" indicator light on the trimmer will illuminate to show that it is charging.
- Allow the trimmer to charge completely. The indicator light may change color or turn off once fully charged (refer to specific product behavior if different).
- Once fully charged, disconnect the USB cable from both the power source and the trimmer.
Setup and Operation
Attaching Guide Combs:
The trimmer comes with four guide combs (1mm, 2mm, 3mm, 4mm) to achieve desired hair lengths.
- Ensure the trimmer is turned off before attaching or removing guide combs.
- Select the desired guide comb.
- Align the comb with the trimmer blade and push it firmly until it clicks into place.
- To remove, gently pull the comb away from the blade.
Trimming Techniques:
For best results, ensure hair is clean and dry before trimming.
- General Trimming: Attach a guide comb. Hold the trimmer with the blade teeth pointing upwards. Begin trimming from the bottom of the desired area, moving upwards against the direction of hair growth.
- Close Shave/Detailing: For a very close cut or precise detailing, remove the guide comb and use the 0mm T-blade directly on the skin. Move the trimmer slowly and carefully. Take the clipper closer to your skin to prevent pulling hair.
- Low Noise Operation: The trimmer is designed for quiet operation. This feature allows for use without causing disturbance.
- Even Cut: For an even cut, make multiple passes over the same area, changing the direction of the trimmer to catch all hairs.
Maintenance and Cleaning
Regular cleaning and maintenance will ensure the longevity and optimal performance of your KEMEI Hair Trimmer.
- Turn Off and Unplug: Always ensure the trimmer is turned off and unplugged from any power source before cleaning.
- Remove Guide Comb: Detach any attached guide comb.
- Clean Blades: Use the provided cleaning brush to brush away loose hairs from the blades and the trimmer head. For thorough cleaning, you may carefully remove the blade assembly (refer to specific product instructions if available for blade removal).
- Wipe Body: Wipe the body of the trimmer with a clean, dry cloth. Do not use abrasive cleaners or immerse the trimmer in water.
- Lubricate Blades: Periodically apply a small drop of clipper oil (not included) to the blades to maintain their sharpness and smooth operation. Turn the trimmer on for a few seconds to distribute the oil.
- Storage: Store the trimmer in a cool, dry place, away from direct sunlight and out of reach of children.
Troubleshooting
If you encounter issues with your KEMEI Hair Trimmer, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Trimmer does not turn on. | Battery is depleted. | Charge the trimmer fully using the provided USB cable. |
| Trimmer pulls hair or cuts poorly. | Blades are dull or clogged with hair. Insufficient lubrication. | Clean the blades thoroughly with the cleaning brush. Apply clipper oil to the blades. Ensure you are moving the trimmer against the direction of hair growth. |
| Trimmer makes unusual noise. | Blades may be misaligned or require lubrication. | Turn off the trimmer, check blade alignment. Apply clipper oil. If the issue persists, contact customer support. |
| Charge indicator light not working. | Faulty cable or power source. Trimmer already fully charged. | Try a different USB power source or cable. If the trimmer is already fully charged, the light may behave differently (e.g., turn off). |
Specifications
| Feature | Detail |
|---|---|
| Model Number | KM-5026 |
| Product Dimensions (L x W x H) | 5.9 x 1.57 x 1.57 inches |
| Item Weight | 12.56 ounces |
| Power Source | Battery Powered |
| Battery Type | 1 Lithium Polymer battery (included) |
| Special Features | Cordless, Rechargeable |
| Recommended Uses | Barber, Beard, Trimming, Shaving, Professional |
Warranty and Support
KEMEI products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation included with your purchase or contact KEMEI customer service through their official website or the retailer where the product was purchased.
Please note that statements regarding dietary supplements in any associated legal disclaimers are not applicable to this product and should be disregarded.
