Amazon Basics FG-03484

Amazon Basics A19 Red LED Light Bulbs (60W Equivalent, 9W, E26 Base, Non-Dimmable) - Instruction Manual

Brand: Amazon Basics | Model: FG-03484

Product Overview

The Amazon Basics A19 Red LED Light Bulbs are designed to provide a vibrant red illumination, ideal for creating a specific ambiance in various indoor and outdoor settings. These bulbs are energy-efficient, consuming only 9 watts while delivering light equivalent to a 60-watt incandescent bulb. Featuring a standard E26 base and a non-dimmable design, they offer a long operational lifespan of approximately 10,000 hours.

Two Amazon Basics A19 Red LED Light Bulbs
Figure 1: Two Amazon Basics A19 Red LED Light Bulbs, showcasing their distinct red color and standard base.

Important Safety Instructions

  • Electrical Safety: Always turn off the power to the fixture before inspecting, installing, or removing the bulb.
  • Indoor/Outdoor Use: These bulbs are suitable for both indoor and outdoor use. Ensure fixtures are rated for the intended environment.
  • Non-Dimmable: These LED bulbs are explicitly non-dimmable. Attempting to use them with dimmer switches may cause damage to the bulb or the dimmer, and will void the warranty.
  • Operating Temperature: Do not use in enclosed fixtures that restrict airflow, as this may shorten the bulb's lifespan.
  • Disposal: Dispose of used bulbs according to local regulations. Do not dispose of in general household waste.

Installation Guide

Follow these steps to safely install your Amazon Basics A19 Red LED Light Bulb:

  1. Verify Power Off: Ensure the power supply to the light fixture is completely turned off at the circuit breaker or wall switch before beginning installation.
  2. Remove Old Bulb: Carefully unscrew the existing light bulb from the fixture. Allow it to cool if it has been recently in use.
  3. Insert New Bulb: Gently screw the Amazon Basics A19 Red LED Light Bulb into the E26 standard base socket. Do not overtighten.
  4. Restore Power: Once the bulb is securely installed, restore power to the light fixture.
  5. Test Functionality: Turn on the light switch to confirm the bulb is working correctly.
Close-up of a single Amazon Basics A19 Red LED Light Bulb
Figure 2: A close-up view of a single Amazon Basics A19 Red LED Light Bulb, highlighting its E26 base.
Hand holding an A19 bulb, showing its dimensions
Figure 3: A hand holding an A19 bulb, illustrating its approximate size and standard form factor for easy replacement.

Operation

Operating your Amazon Basics A19 Red LED Light Bulb is straightforward:

  • Power On/Off: Use the standard wall switch connected to your light fixture to turn the bulb on or off.
  • Non-Dimmable: As these bulbs are non-dimmable, they will operate at full brightness when powered on. They are not compatible with dimmer switches.
  • Ambiance: The red light output is designed to create a specific atmosphere, suitable for parties, decorative lighting, or environments where blue and green light suppression is desired for melatonin protection.
Video 1: This video demonstrates the benefits of 625nm red light for melatonin promotion and sleep enhancement, illustrating a key application for these red LED bulbs.

Care and Maintenance

To ensure the longevity and optimal performance of your LED light bulbs, follow these simple maintenance guidelines:

  • Cleaning: Before cleaning, ensure the power is off and the bulb is cool. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Replacement: While designed for a long lifespan, if a bulb needs replacement, ensure the power is off and the bulb is cool before carefully unscrewing and replacing it with a new one.
  • Storage: If storing bulbs, keep them in their original packaging or a protective container in a cool, dry place to prevent damage.

Troubleshooting

If you encounter issues with your Amazon Basics A19 Red LED Light Bulbs, refer to the table below for common problems and solutions:

ProblemPossible CauseSolution
Bulb does not light upNo power to fixture, loose connection, faulty bulbCheck power supply/switch. Tighten bulb in socket. Test bulb in another working fixture.
Bulb flickersIncompatible dimmer switch, loose connection, power fluctuationsEnsure no dimmer switch is used. Tighten bulb. Check household wiring for stability.
Bulb is not redIncorrect bulb type purchasedVerify the product packaging and bulb markings to ensure it is the red variant.

Product Specifications

FeatureDetail
BrandAmazon Basics
Model NumberFG-03484
Light TypeLED
Special FeatureNon-Dimmable
Wattage9 watts
Bulb Shape SizeA19
Bulb BaseE26 Medium
Incandescent Equivalent60 Watts
Light ColorRed
Voltage120 Volts
Average Life10,000 Hours
Indoor/Outdoor UsageIndoor, Outdoor
MaterialPlastic
Product Dimensions2.37"W x 4.13"H

Warranty and Customer Support

Warranty Information: This Amazon Basics A19 Red LED Light Bulb comes with a 1-year limited warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

Customer Support: For further assistance, troubleshooting, or warranty inquiries, please visit the official Amazon Basics support page or contact Amazon customer service directly. You can find more information and contact options at amazon.com/AmazonBasics.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.