Introduction
This manual provides comprehensive instructions for the Legami Sloth Waterproof Bluetooth Speaker and Speakerphone (Model SHOW0001). Please read this manual carefully before using the device to ensure proper operation and to maximize its lifespan. This device is designed for audio playback and hands-free communication in various environments, including wet conditions.
Product Overview
Package Contents:
- Legami Sloth Waterproof Bluetooth Speaker and Speakerphone
- USB Charging Cable
Device Layout and Controls:
The Legami Sloth speaker features intuitive controls for easy operation. Refer to the image below for a visual guide to the buttons and their functions.
Image 1: Front view of the Legami Sloth Waterproof Bluetooth Speaker, showing the control panel and suction cup. The control panel includes buttons for Power, Play/Pause, Volume Up/Next Track, Volume Down/Previous Track, and Call Answer/End. The speaker is depicted with water splashing around it, highlighting its waterproof design.
- Power Button: Press and hold to turn the speaker on or off.
- Play/Pause Button: Press to play or pause audio.
- Volume Up / Next Track Button: Press to increase volume. Hold to skip to the next track.
- Volume Down / Previous Track Button: Press to decrease volume. Hold to go to the previous track.
- Call Button: Press to answer an incoming call or end an ongoing call.
- Microphone: Built-in for hands-free calling.
- Suction Cup: Located on the back for easy attachment to smooth surfaces.
- USB Charging Port: For connecting the USB charging cable.
Setup
1. Charging the Speaker:
- Locate the USB charging port on the speaker.
- Connect the provided USB charging cable to the speaker's port and the other end to a USB power source (e.g., computer, USB wall adapter).
- The charging indicator light will illuminate during charging.
- A full charge takes approximately 1 hour. The indicator light will change or turn off once charging is complete.
- A fully charged speaker provides up to 2 hours of playtime.
2. Powering On/Off:
- To Power On: Press and hold the Power button until you hear an audible prompt or see an indicator light.
- To Power Off: Press and hold the Power button again until you hear an audible prompt or the indicator light turns off.
3. Bluetooth Pairing:
- Ensure the speaker is powered on and in pairing mode (usually indicated by a flashing LED light).
- On your Bluetooth-enabled device (smartphone, tablet, computer), go to the Bluetooth settings.
- Search for available devices. The speaker should appear as "Legami Sloth Speaker" or a similar name.
- Select the speaker from the list to initiate pairing.
- Once paired, you will hear a confirmation sound, and the LED indicator will typically stop flashing and remain solid.
- The speaker has a maximum range of 10 meters (33 feet) from the paired device.
Operating Instructions
Music Playback:
- After successful pairing, open your music application on your device and start playing audio.
- Press the Play/Pause button on the speaker to pause or resume playback.
- Press the Volume Up or Volume Down buttons to adjust the volume.
- Hold the Volume Up button to skip to the next track.
- Hold the Volume Down button to go to the previous track.
Hands-Free Calling:
- When a call comes in, the speaker will ring.
- Press the Call Button once to answer the incoming call.
- To end an ongoing call, press the Call Button once again.
- To reject an incoming call, press and hold the Call Button.
- The built-in microphone allows for clear communication during calls.
Using the Suction Cup:
The integrated suction cup allows you to attach the speaker to smooth, flat surfaces such as shower walls, tiles, or glass. Ensure the surface is clean and dry for optimal adhesion.
Maintenance
Cleaning:
- Wipe the speaker with a soft, damp cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the device.
- Ensure the charging port cover is securely closed when cleaning or exposing the speaker to water.
Storage:
- Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid storing the device in environments with high humidity for extended periods.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Speaker does not turn on. | Ensure the speaker is fully charged. Connect it to a power source using the USB cable. |
| Cannot pair with a Bluetooth device. |
|
| No sound or low volume. |
|
| Poor sound quality. |
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | SHOW0001 |
| Brand | LEGAMI |
| Dimensions (D x W x H) | 5 cm x 8.5 cm x 8 cm |
| Item Weight | 0.16 Kilograms (161 g) |
| Material | Silicone and ABS plastic |
| Connectivity Technology | Bluetooth, USB (for charging) |
| Wireless Communication | Bluetooth |
| Maximum Range | 10 Meters |
| Power Source | Battery Powered |
| Charging Time | Approximately 1 hour |
| Operation Time | Up to 2 hours of playtime |
| Waterproof | Yes |
| Built-in Microphone | Yes |
| Speaker Maximum Output Power | 3 Watts |
| Compatible Devices | Personal Computer, Smartphone, Tablet |
Warranty and Support
The Legami Sloth Waterproof Bluetooth Speaker comes with a limited warranty. Please refer to the product packaging or your point of purchase for specific warranty terms and conditions.
For technical support or further assistance, please contact Legami customer service through their official website or the retailer where the product was purchased.
