1. Introduction
The Eureka! Space Camp 6 Tent Footprint is designed to provide an additional layer of protection for the floor of your Eureka! Space Camp 6 tent. This accessory safeguards your tent from abrasion, punctures, and moisture, extending the lifespan of your tent and enhancing your camping experience.
Constructed from durable, waterproof polyester fabric, this custom-cut footprint perfectly matches the dimensions of the Space Camp 6 tent, including its main sleeping area and vestibule extensions.
2. Setup Instructions
- Prepare the Campsite: Before setting up your tent, clear the chosen area of any sharp objects, rocks, or debris that could damage the footprint or tent floor.
- Unfold the Footprint: Carefully unfold the Eureka! Space Camp 6 Tent Footprint and lay it flat on the ground where your tent will be pitched.
- Orient Correctly: Ensure the side marked "THIS SIDE GROUND" is facing downwards, in contact with the ground. This ensures the most durable and waterproof surface is protecting your tent.
- Align with Tent: Position the footprint so that its edges align with the intended placement of your Eureka! Space Camp 6 tent. The custom shape is designed to fit precisely under the tent's main body and vestibules.
- Secure the Footprint: The footprint features grommets in all four corners. Align these grommets with the pin/ring pole setup of your Space Camp 6 tent. Once the tent poles are inserted into the tent's rings, the footprint will be securely held in place underneath.
Image: The Eureka! Space Camp 6 Tent Footprint, folded to show the "THIS SIDE GROUND" label, indicating the correct orientation for placement.
3. Usage
Once properly installed, the footprint acts as a barrier between your tent floor and the ground. It prevents direct contact with abrasive surfaces, sharp objects, and ground moisture. This significantly reduces wear and tear on your tent's integrated floor, keeping it cleaner and drier.
The footprint's waterproof coating and taped seams ensure that ground moisture does not seep through, helping to minimize internal condensation in wet conditions and keeping the interior of your tent dry.
4. Maintenance
- Cleaning: After each use, especially if the footprint is dirty or muddy, clean it thoroughly. The manufacturer recommends hand washing the footprint. Use mild soap and lukewarm water. Avoid harsh detergents or abrasive cleaners, as these can damage the waterproof coating.
- Drying: Ensure the footprint is completely dry before folding and storing it. Lay it out or hang it in a shaded, well-ventilated area. Storing a damp footprint can lead to mildew growth and damage to the fabric and coating.
- Storage: Fold the dry footprint neatly and store it in its included stuff sack. Keep it in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspection: Periodically inspect the footprint for any signs of wear, tears, or damage to the waterproof coating. Minor punctures can often be repaired with a tent repair kit.
Image: The Eureka! Space Camp 6 Tent Footprint neatly packed in its dedicated stuff sack for storage and transport.
5. Troubleshooting
- Footprint not staying in place: Ensure the footprint is correctly aligned with the tent's base and that its corner grommets are properly engaged with the tent's pin/ring pole setup. Verify the tent itself is pitched tautly.
- Water pooling between footprint and tent floor: This can occur if the footprint extends beyond the tent's rainfly, collecting water that then runs under the tent. Ensure the footprint is positioned entirely underneath the tent and its vestibules, not extending past the tent's perimeter. Also, confirm the "THIS SIDE GROUND" is facing down.
- Footprint appears damp after use: This is normal if the ground was wet. The footprint is designed to absorb and block this moisture. Ensure it is thoroughly dried before storage to prevent mildew.
6. Specifications
| Brand | Eureka! |
| Model Name | Space Camp Footprint |
| Model Number | 2660199 |
| UPC | 083826601996 |
| Product Dimensions (L x W) | 175" x 114" (approximately 14.58 ft x 9.5 ft) |
| Item Weight | 4.96 ounces |
| Material Type | 68D 190T Polyester Taffeta |
| Water Resistance Technology | 1200 mm waterproof coating with taped seams |
| Included Components | Footprint, Stuff Sack |
| Recommended Use | Camping & Hiking |
7. Warranty Information
The Eureka! Space Camp 6 Tent Footprint comes with a 1-year limited warranty. This warranty covers manufacturing defects in materials and workmanship. For specific terms and conditions, or to make a warranty claim, please refer to the official Eureka! website or contact their customer support.
8. Support
For further assistance, questions, or to report any issues with your Eureka! Space Camp 6 Tent Footprint, please visit the official Eureka! website or contact their customer service department. Contact information can typically be found on the Eureka! brand website or product packaging.
You can also visit the Eureka! Store on Amazon for more product information and resources.
