Meike FC-110 LED Macro Ring Flash User Manual

Introduction

The Meike FC-110 LED Macro Ring Flash is designed to provide consistent and natural lighting for macro photography, scientific research, medical applications, and personal hobbies. It features advanced LED flash technology, adjustable luminance, and left/right flash functions for enhanced depth and creative lighting control.

Product Overview

Key Features

• Full LED flash technology for natural light.
• Seven levels of luminance adjustment.
• Left and right flash function for dimensional lighting.
• Constant light or flash mode operation.
• Includes an orange filter for warmer light (3200K).
• Controlled via an integrated LCD display.
• Compatible with Canon, Nikon, Pentax, and Olympus cameras.

Package Contents

• Meike FC-110 LED Macro Ring Flash unit
• Adapter rings: 52mm, 55mm, 58mm, 62mm, 67mm, 72mm, 77mm
• Color Temperature Ring (Orange)
• User Manual (Chinese and English)

Image: The Meike FC-110 LED Macro Ring Flash package contents, showing the ring flash, control unit, various adapter rings, orange color filter, and user manual.

Setup

1. Battery Installation

The FC-110 requires 4 AA batteries (not included). Open the battery compartment on the control unit and insert the batteries, ensuring correct polarity as indicated inside the compartment.

2. Attaching Adapter Rings

Select the appropriate adapter ring (52mm, 55mm, 58mm, 62mm, 67mm, 72mm, or 77mm) that matches the filter thread size of your camera lens. Screw the chosen adapter ring onto the front of your lens until it is secure.

3. Mounting the Ring Flash

Attach the LED ring flash unit to the selected adapter ring. Ensure it is securely fastened. If the ring flash feels loose or unstable on the adapter ring, some users have found that adding a thin rubber O-ring to the groove of the attachment point can improve stability.

4. Mounting the Control Unit

Slide the control unit onto your camera's cold shoe mount. Connect the coiled cable from the ring flash to the designated port on the control unit.

Image: The Meike FC-110 LED Macro Ring Flash mounted on a camera, showing the ring flash attached to the lens and the control unit on the camera's cold shoe.

Operating Instructions

1. Power On/Off

Press the ON/OFF button on the control unit to power the device on or off. The LCD display will illuminate when the unit is powered on.

2. Mode Selection

Press the MODE button to switch between constant light mode and flash mode. In constant light mode, the LEDs remain continuously lit, providing a steady light source. In flash mode, the LEDs will flash in sync with your camera's shutter release.

3. Luminance Adjustment

Use the arrow buttons (< and >) to adjust the brightness level of the LEDs. There are seven distinct levels of luminance available to suit various lighting conditions and creative needs.

4. Left/Right Flash Function

The FC-110 allows for independent control of the left and right flash sections. Refer to the LCD display and control buttons to activate or deactivate specific sections. This function enables creative lighting effects, such as emphasizing one side of the subject or adding depth.

5. Using the Color Temperature Filter

To achieve a warmer light output (approximately 3200K), attach the orange color temperature ring to the front of the LED ring flash. Remove it for standard 5500K daylight-balanced light.

6. Flash Synchronization and Exposure

The flash synchronizes at 1/100 seconds. Ensure your camera's shutter speed is set accordingly for optimal flash performance. The unit supports both automatic and manual exposure control, which can be adjusted via the control unit's buttons and LCD display.

Image: The Meike FC-110 LED Macro Ring Flash unit, showing the control panel with LCD, the LED ring, adapter rings, and the orange color temperature filter.

Maintenance

Cleaning

Wipe the unit with a soft, dry cloth. Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the surface or electronic components.

Battery Care

Remove batteries if the unit will not be used for an extended period to prevent potential battery leakage, which can cause damage to the device.

Storage

Store the flash unit in a cool, dry place, away from direct sunlight, high humidity, and extreme temperatures. Keep it protected from dust and physical impact.

Troubleshooting

• Flash not firing: Check battery levels and replace if necessary. Ensure the control unit is securely mounted on the camera's cold shoe and the cable connection between the ring flash and control unit is firm. Verify the camera's flash settings are correctly configured.
• Ring flash feels loose on lens: Ensure the adapter ring is correctly screwed onto the lens and the ring flash is properly attached to the adapter. If instability persists, consider adding a thin rubber O-ring to the groove of the attachment point on the ring flash for a more stable fit, as suggested by some users.
• Insufficient light output: Adjust the luminance level using the arrow buttons on the control unit. Ensure the correct mode (constant or flash) is selected. Check battery power and replace if low.
• Inconsistent lighting: Verify that both left and right flash sections are functioning as intended. Adjust the left/right flash function settings if necessary to ensure even illumination or desired directional lighting.

Specifications

Warranty and Support

This product is manufactured by Meike. For support or warranty inquiries, please contact your retailer or visit the official Meike website for further assistance.

• Manufacturer: Meike
• Model Number: FC-110
• ASIN: B07P945TR1