1. Introduction and Overview
The Smof 30 Pin Bluetooth Adapter Receiver is designed to transform your traditional wired music docking station into a wireless audio system. This adapter allows you to stream high-quality audio wirelessly from your Bluetooth-enabled devices, such as smartphones and tablets, to your existing 30-pin dock speakers. It is particularly suitable for giving new life to classic Bose SoundDock systems and other compatible 30-pin docking stations.
Please note: This adapter is NOT recommended for use in cars or motorcycles.
2. Product Features
- Wireless Conversion: Activates your 30-pin wired music docking station for wireless Bluetooth audio streaming.
- Easy to Use: Features a simple plug-and-play design for quick setup.
- Broad Compatibility: Compatible with most iPhone, Android phones, and other Bluetooth-enabled devices.
- Dual Device Pairing: Supports simultaneous pairing with two devices (e.g., iPhone and iPad).
- Portable Design: Compact and lightweight, making it easy to transport.
- Effective Range: Offers a Bluetooth range of up to 33 feet (10 meters) in open air.
- AUX Audio Mode: Provides an alternative connection via a 3.5mm audio cable if direct 30-pin connection yields no sound.
3. Package Contents
Upon opening your Smof 30 Pin Bluetooth Adapter Receiver package, you should find the following items:
- 1x Smof 30 Pin Bluetooth Adapter
- 1x 3.5mm Audio Cable
- 1x User Guide
- 1x Product Packaging
Image: Contents of the Smof 30 Pin Bluetooth Adapter Receiver package, showing the adapter, audio cable, user guide, and packaging.
4. Setup and Installation
Follow these steps to set up your Smof Bluetooth Adapter:
- Insert the Adapter: Carefully plug the Smof 30 Pin Bluetooth Adapter into the 30-pin dock connector of your speaker or docking station. Ensure it is firmly seated.
- Power On: Locate the ON/OFF switch on the adapter and slide it to the "ON" position. An indicator light will illuminate, typically blue, indicating it is powered on and ready for pairing.
- Alternative Connection (AUX Mode): If you experience no sound after successful pairing, your speaker may require an AUX audio input. Convert your speaker to AUX Audio Mode (refer to your speaker's manual if unsure). Then, connect the provided 3.5mm audio cable from the AUX port on the Smof adapter to the AUX IN dock of your speaker.
Image: A hand inserting the Smof Bluetooth Adapter into the 30-pin port of a speaker dock.
Image: The Smof Bluetooth Adapter securely plugged into a speaker dock, with its indicator light visible.
Image: The Smof Bluetooth Adapter shown with a 3.5mm audio cable connected to its AUX port.
5. Operating Instructions
Once the adapter is installed and powered on, follow these steps to pair and play music:
- Enable Bluetooth on Your Device: On your smartphone, tablet, or other Bluetooth-enabled device, go to your Bluetooth settings and ensure Bluetooth is turned on.
- Search for Devices: Your device will automatically scan for available Bluetooth devices. Look for "Smof" or a similar identifier in the list of found devices.
- Pair with Smof: Select "Smof" from the list to initiate the pairing process. Once connected, the indicator light on the adapter may change or remain steady blue, and your device will show a "Connected" status.
- Play Music: Open your preferred music application on your paired device and begin playing audio. The sound will now be transmitted wirelessly to your docking station speakers.
Image: A three-step visual guide showing how to connect the adapter, convert to AUX mode if needed, and pair with a phone via Bluetooth settings.
Image: A person relaxing and listening to music streamed wirelessly from their phone to a speaker dock with the Smof adapter.
6. Compatibility
The Smof 30 Pin Bluetooth Adapter is designed for a wide range of 30-pin docking stations and speakers. Below are lists of generally compatible and incompatible models. Please review these lists carefully before purchase and use.
Compatible Models (Examples):
- Bose SoundDock: Series I, SoundDock II, SoundDock 10, SoundDock Portable
- Philips: DCJ3020, DCB000/93, DCM713, DCM3060, DS1100, DCM2055, AJ7040D
- Sony: AIR-SW10Ti, ICF-C1iPMK2, ICF-C05iP, ICF-FC71iP, ICF-CS10iP, ICF-M51iP, ICF-DS11iP, RDP-M7iP
- JBL: On Stage 3, On Stage 4, On Time 200P, On Time Micro, Radial Micro, On Stage IIIP
- Yamaha/iHome/Sansui: Yamaha PDX-11, Yamaha TSX-70, Yamaha TSX-130, iHome iH1 Studio, iHome iH9 Studio, Sansui MC-7000SD
- Added Models: DOSS DS-375, LG FA-168, MOGIC R1100, Bijola H12281, Altor Lansing
Image: A visual chart displaying various compatible speaker dock models from brands like Bose, Philips, Sony, JBL, Yamaha, iHome, and Sansui.
Incompatible Models (Examples) and Important Notes:
- This adapter is NOT compatible with vehicles (cars or motorcycles).
- Klipsch: iFi-speaker system
- Lanchiya: iPup
- LG: LHB953 Network Blu-Ray Disc Home Theater System, Pure Fi Express Plus S-00067
- Marantz: Consulette M57000
- Monitor Audio: i-deck 200
- Onkyo: CR-545, CR-545, CS-345, CD HiFi Mini, Lunar 350, HT-R580, HT-6305
- Panasonic: SA-BT30, SA-PM500, SA-PT670, SA-PT750, SA-PT950, SA-PT960, SC-BT370, SC-HC20, SC-HC25, SC-HC30, SC-HC35, SC-HC37, SCHC271
- Philips: AJ32700/17, DCM5090/10, DCM580, Fidelio DS9000, DS9, DS9/37, DS8550, DS8530, DS8500
- Pioneer: S72-D10Z, X-EM21, XW-NAS3, XW-NAV1-K
- Pure: i20
- Pyle: PSB601, Tower2.1
- Russound: BGK-1, iBridge
- Altec Lansing: M602, IMT630, IMT810
- Anthem: MRX500
- B&O: Beoplay A8, BeoSound 8
- Bose: WaveIII Dock with Bose Link Cable
- Bowers & Wilkins: Zeppelin, Zeppelin Air, Zeppelin Mini
- Brookstone: iPod Stereo Dock PS236A, iDesign Powerspeaker
- Cambridge Audio: ID100
- Channel Vision: IBUS A-0314, IBUS AB-313 Whole House Audio
- Denon: ASD-R11, ASD-S1W, DSD-500
- Directed Electronics: Soloist Universal Sound System
- DLO: HomeDock for iPod
- Geneva: Sound System Model S
- Harman Kardon: AVR 3600
- iHome: IDN38, iH49, iH52, iHL64, iH71
- iLive: IS208B, iH3198B, iHH810B Home Theater System
- Kenwood: KMR-700U Marine USB/iPod Receiver
- Kicker: IK501
- Samsung: All models of Home Theater and/or Blu-Ray devices
- Sangean: WR-5
- Sharp: GX-M10
- Sony: AIR-SA15Ti, AIR-SA20PK, BDV-E500W, BDV-T10, BDV-T11M, BRAVIA Home Theater System, CMT-BX20i, CMT-CX4iP, CMT-FX300i, CMT-LX20i, CMT-LX30iR, CMT-MX500i, CMT-MX500i, CMT-V50iP, DAV-DHS576WF, DAV-HDX589W, DAV-HDX285, DAV-HDZ273, EZW-RT10 Airplay Digital Media Port Cradle TDM-iP10, HCDBX20i, HCD-LX20i, HCD-MX500i, HT-CS380, ICF-CD3iP, ICF-CL75iP, ICF-CL75iP, ICF-LS15iP, LBT-ZX66i, MHC-EC69i, MHC-EC69iP, MHC-EC709iP, MHC-EC909iP, NAS-SV20i, RDP-GTK90iP, RDP-X200iP, RDP-X500iP, RDP-X50iP, RDP-X60iP, TDM-iP10, TDM-iP20, TDM-iP50, XDR-S10iHPiP, S-Airplay, S-Wireless, SS-SLK2i
- TEAC: DS-H01
- Wadia: 170i Transport iPod Dock
- Yamaha: CRX-040, CRX-300, CRX-330, CRX-332, MCR-042, PDX-50, RX-V2700, RX-V667, TSX-132, YDS-11, Dock for Home Theater Receivers, YDS-12 Dock for Home Theater Receivers, YSP-4100
- Vers: 2X iPod Sound System
Image: A detailed chart listing numerous speaker models and brands that are not compatible with the Smof 30 Pin Bluetooth Adapter, with a large red 'X' over a car radio indicating incompatibility with vehicles.
Some compatible speakers may cease to function correctly due to extended use (over 20 years in some cases), aging ports, or internal speaker failure, which can make the Bluetooth adapter appear incompatible. This is typically an issue with the speaker itself, not the adapter.
7. Troubleshooting
No Sound After Successful Pairing:
If you have successfully paired your device with the Smof Bluetooth Adapter, but no sound is coming from your speaker, please try the following steps:
- Check Speaker Mode: Ensure your speaker is set to the correct input mode, specifically AUX Audio Mode. Some speakers require manual switching to AUX when an external audio source is connected.
- Use AUX Cable: Connect the provided 3.5mm audio cable from the AUX output on the Smof adapter to the AUX IN port on your speaker.
- Re-pair Device: After connecting the AUX cable and ensuring the speaker is in AUX mode, attempt to re-pair your phone or Bluetooth device with the Smof adapter.
Image: A visual representation of the troubleshooting steps for no sound, emphasizing the use of the AUX cable and re-pairing.
General Troubleshooting Tips:
- Power Cycle: Turn off both the Smof adapter and your speaker, then turn them back on.
- Reboot Bluetooth Device: Turn off and on the Bluetooth on your phone/tablet, or restart the device entirely.
- Clear Pairings: On your Bluetooth device, forget or unpair the Smof adapter, then attempt to pair again.
- Distance: Ensure your Bluetooth device is within the 33-foot (10-meter) range of the adapter and there are no significant obstructions.
- Interference: Move away from other wireless devices (Wi-Fi routers, cordless phones) that might cause interference.
8. Specifications
| Specification | Value |
|---|---|
| Product Dimensions | 2.05 x 1.42 x 0.2 inches (5.2 x 3.6 x 0.5 cm) |
| Item Weight | 0.423 ounces (12 grams) |
| Model Number | 30pin-4871 |
| Hardware Interface | Bluetooth |
| Color | Black |
| Compatible Devices | Docking stations, speakers, iPhone models, Android phones, and other Bluetooth-enabled devices |
| Data Link Protocol | Bluetooth |
| Data Transfer Rate | 3 Megabits Per Second |
| Manufacturer | Smof |
| Date First Available | April 8, 2019 |
| UPC | 764560547961, 655160808005, 631112764476 |
9. Warranty and Support
Each Smof Bluetooth adapter comes with a 12-month warranty from the date of purchase.
If you encounter any problems or have questions regarding your Smof 30 Pin Bluetooth Adapter Receiver, please do not hesitate to contact our brand's customer service team. We are committed to providing support and assistance to ensure your satisfaction.
For customer service inquiries, please refer to the contact information provided on the product packaging or the official Smof website.
