1. Introduction
This manual provides essential information for the safe and effective use of ELEGOO ABS-Like 3D Printer Resin. This photopolymer resin is designed for 3D printing with 385-410nm UV LCD/DLP/MSLA printers, offering high precision, low shrinkage, and enhanced tenacity for detailed and durable prints.
2. Safety Precautions
Always prioritize safety when handling resin. Read all instructions before use.
- Shake Well Before Use: Ensure the resin is thoroughly mixed before pouring to achieve consistent print quality.
- Recommended Temperature: Use the resin in an environment with a temperature between 20°C and 25°C (68°F - 77°F) for optimal performance.
- Wear Protective Gear: Always wear gloves and a mask to avoid direct skin contact and inhalation of fumes.
- Storage: Keep the resin away from children, dust, and direct sunlight. Store in a cool, dry, and well-ventilated area.
- Emergency Contact: In case of direct skin contact, wash immediately with plenty of water. If irritation persists or if ingested, seek medical attention.
3. Product Features
ELEGOO ABS-Like Photopolymer Resin offers a balance of strength, flexibility, and precision, making it suitable for a wide range of 3D printing applications.
- High Precision & Low Shrinkage: Features low volume and linear shrinkage, ensuring smooth surface finishes, fine textures, and accurate dimensions.
- Less Brittleness & Higher Tenacity: Possesses mechanical properties similar to ABS plastic, including high impact resistance, good strength, and increased tenacity, reducing fracture or deformation.
- Good Fluidity & Low Viscosity: Rapid solidification and smooth flowback prevent