Introduction
The PetSafe Stay & Play Wireless Fence for Stubborn Dogs is a portable pet containment system designed for high-energy, hard-to-train dogs. This system utilizes advanced wireless fence technology to create a secure, invisible boundary perimeter without the need for digging or buried wires. The circular boundary can be adjusted to cover up to 3/4 of an acre, providing a flexible and accurate solution that can be set up quickly.
Important Safety Information
Warning:
In case of frequent power outages, it is advised to use an Uninterruptible Power Supply (UPS) with the transmitter to prevent possible unintended activation of the receiver collar. Always ensure the system is functioning correctly before leaving your pet unsupervised.
What's Included
The PetSafe Stay & Play Wireless Fence Kit includes all necessary components for setting up your pet containment system. This image displays the main components: the wireless transmitter, the rechargeable receiver collar, and a set of training flags.
- Wireless Transmitter with Power Adaptor
- Waterproof Receiver Collar with Adjustable Strap
- Receiver Charger
- 50 Training Flags
- PetSafe® Rechargeable Li-ion Battery (non-replaceable, included within collar)
A closer look at the individual components. The transmitter acts as the central hub for your pet's play area, the collar provides the necessary alerts and corrections, and the flags serve as temporary visual cues during the training phase.
Setup Guide
Setting up your PetSafe Stay & Play Wireless Fence is a straightforward process, typically taking 1-2 hours.
Step 1: Place the Transmitter
Plug in the wireless transmitter in a central location within your desired containment area. The transmitter creates a circular boundary around itself. Ensure it is placed in a dry, protected area, away from large metal objects that could interfere with the signal.
Step 2: Define the Boundary
Adjust the range setting on the transmitter to customize the size of your circular boundary. The system can cover up to 3/4 of an acre. Walk the perimeter of the desired containment area to confirm the signal range. Use the included training flags to mark the boundary visually. Place flags approximately 10-15 feet apart along the edge of the correction zone.
This image illustrates a dog running within the defined correction zone. The dotted line represents the invisible boundary where the collar will activate. The system is designed to provide a correction-free re-entry, meaning your dog will not be corrected when returning to the safe zone.
Step 3: Prepare the Receiver Collar
Ensure the receiver collar is fully charged before use. The collar is waterproof and designed for dogs 5 pounds and up with neck sizes from 6-28 inches. Adjust the collar to fit snugly on your dog's neck, ensuring the contact points touch the skin.
Operating Your Wireless Fence
The receiver collar features multiple settings to tailor the training to your dog's temperament.
This image highlights the key features of the PetSafe receiver collar. It offers 5 adjustable static correction levels, a tone-only training mode, a battery status indicator, and a quick-charge rechargeable battery. The collar is also waterproof, making it suitable for various outdoor conditions. The system supports adding multiple collars for additional pets.
- Correction Levels: The collar has 5 adjustable static correction levels, allowing you to choose the appropriate intensity for your dog. Start with the lowest level and increase only if necessary.
- Tone-Only Mode: A tone-only mode is available for initial training, providing an audible warning before any static correction.
- Static-Free Reentry: The system is designed so that your dog will not receive a static correction when re-entering the safe zone from the correction zone.
- Battery Indicator: The collar includes a battery status indicator to inform you when charging is needed.
- Multi-Pet System: Additional receiver collars can be purchased and synced to the same transmitter to contain multiple pets within the same boundary.
Training Your Dog
Consistent training is crucial for your dog to understand the wireless fence boundary. Begin with short, supervised training sessions using the tone-only mode and the visual training flags. Gradually introduce static correction levels as your dog learns to respect the boundary. Always provide positive reinforcement when your dog responds correctly.
Maintenance
Charging the Receiver Collar
The receiver collar is equipped with a quick-charge rechargeable battery. Connect the provided charger to the collar's charging port. A full charge typically takes a few hours. The battery status indicator will show when the collar is fully charged.
Cleaning
Periodically clean the receiver collar and contact points with a damp cloth. Ensure the contact points are free of dirt or debris to maintain proper function. Do not submerge the transmitter in water.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Collar not activating at boundary. | Collar battery low or dead; collar not turned on; transmitter unplugged or malfunctioning; boundary range set too small. | Charge collar battery; ensure collar is turned on; check transmitter power and connection; increase boundary range on transmitter. |
| Dog crosses boundary. | Insufficient training; correction level too low; collar fit too loose. | Reinforce training with consistent sessions; increase correction level gradually; adjust collar for a snug fit with contact points touching skin. |
| Inconsistent boundary. | Large metal objects near transmitter; power fluctuations. | Relocate transmitter away from metal objects; consider using a UPS for power stability. |
| Collar not holding charge. | Battery degradation; faulty charger. | Ensure charger is working; if battery life is significantly reduced, contact customer support for potential replacement options (note: battery is non-replaceable by user). |
Product Specifications
| Model Name | PIF00-13663 |
| Item Weight | 5 Pounds (total package) |
| Item Dimensions (LxWxH) | 12 x 11.9 x 10 inches (package) |
| Power Source | Transmitter: AC Power; Collar: Rechargeable Lithium Ion Battery |
| Coverage Area | Up to 3/4 acre (circular boundary) |
| Collar Fit | Neck sizes 6-28 inches, for dogs 5 lbs and up |
| Correction Levels | 5 adjustable static correction levels + tone-only mode |
| Waterproof | Yes, receiver collar is waterproof |
| Included Components | Transmitter, Receiver Collar, Charger, 50 Training Flags |
Warranty and Customer Support
Warranty Information
This PetSafe product comes with a 1 Year Limited Warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.
Customer Support
For further assistance, troubleshooting, or warranty inquiries, please visit the official PetSafe website or contact their customer support. You can find more information and products at the PetSafe Store on Amazon.
