1. Introduction
This manual provides detailed instructions for the installation, configuration, and operation of the Teltonika RUTX09 LTE Cat6 Industrial Cellular Router. The RUTX09 is designed as a reliable primary or backup internet source, offering high-speed cellular connectivity and robust networking capabilities for various industrial and business applications.
Important Note on Regional Compatibility:
- This device is intended for use with carriers in Europe, the Middle East, Africa, APAC, and Brazil.
- This device is not for use in the USA.
2. Package Contents
Verify that all items are present in your product package:
- Teltonika RUTX09 Router
- 18W EU Power Supply Unit (PSU)
- 2 x LTE Antennas (3-meter cable each)
- 1 x GNSS Antenna
- SIM Adapter Kit
- 1.5-meter Ethernet Cable
3. Product Overview
The Teltonika RUTX09 is an industrial-grade cellular router featuring robust connectivity options and a durable design. Familiarize yourself with the device's physical components.
Figure 3.1: Front view of the Teltonika RUTX09 router, displaying the model number, brand logo, power input specifications, and default IP address.
3.1. Physical Interfaces and Indicators
The RUTX09 features various ports and LED indicators for status monitoring and connectivity.
Figure 3.2: Bottom panel of the RUTX09, showing the power input, reset button, WiFi indicators, and Ethernet ports (LAN1, LAN2, LAN3, WAN).
- Power Input: 4-pin industrial DC power socket (9-50 VDC).
- Reset Button: Used for factory reset or reboot.
- LED Indicators:
- PWR: Power status indicator.
- WiFi (2.4GHz, 5GHz): Indicates WiFi activity for the integrated 802.11ac Dual-Band WiFi.
- LAN1, LAN2, LAN3, WAN: Ethernet port status indicators.
- Ethernet Ports:
- 1 x WAN port (configurable as LAN) 10/100/1000 Mbps
- 3 x LAN ports 10/100/1000 Mbps
Figure 3.3: Side panel of the RUTX09, showing Mobile (AUX), GPS, Mobile (MAIN) antenna connectors, USB port, and grounding screw.
- Antenna Connectors:
- Mobile AUX (LTE)
- GPS (Global Navigation Satellite System)
- Mobile MAIN (LTE)
- WiFi (Not explicitly shown in this view, but present for 802.11ac functionality)
- USB Port: For external storage or other compatible peripherals.
- Grounding Screw: For proper grounding of the device.
4. Setup
4.1. SIM Card Installation
- Ensure the router is powered off.
- Locate the SIM card slots on the device. The RUTX09 supports dual SIM cards.
- Using the provided SIM adapter kit if necessary, insert your activated SIM card(s) into the designated slots until they click into place.
- Ensure the SIM cards are correctly oriented as indicated on the device.
4.2. Antenna Connection
- Connect the two LTE antennas to the "Mobile MAIN" and "Mobile AUX" connectors.
- Connect the GNSS antenna to the "GPS" connector.
- If using WiFi, connect the appropriate WiFi antennas (if external) to their designated connectors.
- Tighten all connectors hand-tight to ensure a secure connection.
- Position the antennas for optimal signal reception.
4.3. Power Connection
- Connect the 4-pin power adapter to the power input socket on the router.
- Connect the other end of the power adapter to a suitable power outlet.
- The router will power on automatically. Observe the PWR LED indicator.
4.4. Initial Access
- Connect your computer to one of the LAN ports (LAN1, LAN2, or LAN3) on the RUTX09 using the provided Ethernet cable. Alternatively, connect to the router's WiFi network using the default SSID and password (usually found on a sticker on the device).
- Ensure your computer is configured to obtain an IP address automatically (DHCP).
- Open a web browser and navigate to the default IP address: http://192.168.1.1.
- Enter the default login credentials (usually found on a sticker on the device or in the quick start guide).
- Follow the on-screen instructions for initial configuration, including changing the default password for security.
5. Operating Instructions
5.1. Basic Configuration
After logging into the web interface, you can configure various network settings:
- Network Settings: Configure WAN (cellular or Ethernet), LAN, WiFi, and DHCP settings.
- Mobile Configuration: Verify SIM card status, signal strength, and APN settings. The device supports auto APN detection.
- System Settings: Adjust time, date, and manage user accounts.
5.2. Advanced Features
- Dual SIM: The RUTX09 supports two SIM cards with features like auto-failover, backup WAN, and other switching scenarios to ensure continuous connectivity.
- Carrier Aggregation: Utilize LTE Cat6 capabilities for cellular speeds up to 300 Mbps by combining multiple frequency bands.
- Ethernet Ports: Configure the 4 Gigabit Ethernet ports, supporting up to 128 port/tag-based VLANs.
- WiFi: Configure 802.11ac Dual-Band WiFi settings, including SSID, password, and security protocols. Supports WPS.
- Routing: Implement static and dynamic routing protocols.
- Security: Configure authentication methods (Pre-shared key, digital certificates, X.509 certificates) and web filters (blacklist for unwanted websites).
- Global Navigation Satellite System (GNSS): Use for location services and time synchronization.
6. Maintenance
6.1. Firmware Updates
Regularly update the router's firmware to ensure optimal performance, security, and access to new features. Firmware updates are typically performed via the web interface. Refer to the official Teltonika Networks website for the latest firmware versions and detailed update procedures.
6.2. Reset Procedures
- Soft Reboot: Can be initiated from the web interface.
- Factory Reset: To restore the device to its default settings, press and hold the reset button for approximately 10 seconds while the device is powered on. Release the button when all LEDs flash.
7. Troubleshooting
This section addresses common issues you might encounter with your RUTX09 router.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power / Device not turning on | Incorrect power connection, faulty power adapter, power outlet issue. | Verify power cable connection, test power adapter, try a different power outlet. Ensure input voltage is within 9-50 VDC. |
| No cellular signal / Internet connection | SIM card not inserted correctly, inactive SIM, incorrect APN settings, poor antenna connection, weak cellular coverage. | Reinsert SIM card, check SIM activation with carrier, verify APN settings in web interface, ensure antennas are securely connected and positioned, check cellular coverage in your area. |
| Cannot access web interface (192.168.1.1) | Incorrect IP address, Ethernet cable issue, computer IP settings, router malfunction. | Ensure correct IP address is typed, try a different Ethernet cable, verify computer's IP settings (DHCP enabled), try a factory reset if necessary. |
| Slow cellular speeds | Weak signal, network congestion, carrier limitations, antenna placement. | Optimize antenna placement, check signal strength in web interface, contact your cellular carrier, ensure Carrier Aggregation is active if supported by your SIM/network. |
| WiFi not broadcasting or connecting | WiFi disabled, incorrect SSID/password, antenna issue, channel interference. | Check WiFi settings in the web interface, verify SSID and password, ensure WiFi antennas are connected (if external), try changing WiFi channels. |
8. Specifications
Detailed technical specifications for the Teltonika RUTX09 LTE Cat6 Router:
| Category | Detail |
|---|---|
| Mobile Module | 4G (LTE) - Cat 6 up to 300 Mbps, 3G - Up to 42 Mbps |
| SIM Switch | 2 SIM cards, auto-switch |
| APN | Auto APN |
| WAN Port | 1 x WAN port (configurable as LAN) 10/100/1000 Mbps |
| LAN Ports | 3 x LAN ports, 10/100/1000 Mbps |
| Wireless Standard | 802.11ac (Wi-Fi 5) |
| Frequency Band | Dual-Band (2.4 GHz / 5 GHz) |
| Special WiFi Feature | WPS (Wi-Fi Protected Setup) |
| Routing | Static routing, Dynamic routing |
| DHCP | Static and dynamic IP allocation, DHCP Relay, Relayd |
| Security Authentication | Pre-shared key, digital certificates, X.509 certificates |
| Web Filter | Blacklist for blocking unwanted websites |
| CPU | Quad-core ARM Cortex A7, 717 MHz |
| RAM | 256 MB, DDR3 |
| FLASH Memory | 256 MB, SPI Flash |
| Power Connector | 4 pin industrial DC power socket |
| Input Voltage Range | 9 - 50 VDC |
| PoE | Passive PoE (Power over Ethernet) |
| Dimensions (WxHxD) | 4.52 x 1.74 x 3.74 inches (114.8 x 44.2 x 95 mm) |
| Weight | 1 pound (455 grams) |
Serial Number: 1118902399
IMEI: 86133005161647583
LAN MAC: 001E424BFA5C
Batch Number: 030
9. Warranty and Support
Teltonika Networks products are covered by a manufacturer's warranty. For detailed warranty information, please refer to the official Teltonika Networks website or the warranty card included with your product.
For technical support, firmware updates, and additional resources, visit the official Teltonika Networks support portal:
- Teltonika Networks Wiki (for comprehensive documentation)
- Teltonika Networks Support Page
When contacting support, please have your device's serial number, IMEI, and batch number ready for faster assistance.
