Introduction and Overview
The EAGLE PEAK 10x10 Pop Up Canopy Tent (Model E100) is designed for easy setup and reliable outdoor use. This manual provides essential information for assembling, operating, maintaining, and troubleshooting your canopy. Please read all instructions carefully before use.
- Easy Setup: Features the Peak Push system for quick, one-person setup.
- Heavy Duty Top: CPAI-84 rated 150D silver-coated oxford top with UPF 50+ sun protection and vented design.
- Premium Steel Frame: Powder-coated steel frame with hardened through-bolts for strength and rust resistance.
- Compact and Portable: Includes a wheeled carry bag for easy transport.
Setup Instructions
Follow these steps for quick and easy assembly of your EAGLE PEAK canopy tent.
- Unpack the Frame: Remove the folded frame from the wheeled carry bag.
- Partially Open the Frame: Gently pull the legs of the frame outwards until it is partially open, creating enough space to drape the canopy top over it.
- Attach the Canopy Top: Drape the canopy fabric over the partially opened frame. Secure the Velcro straps at each corner of the canopy to the frame legs. Ensure the fabric is evenly distributed.
- Fully Extend the Frame: Stand inside the partially opened canopy. Locate the patented Peak Push system in the center of the canopy. Push upwards on the center hub until it locks into place, fully extending the frame.
- Extend the Legs: Starting with one leg, press the red button on the leg slider and extend the leg to your desired height. Repeat for all four legs. There are three height settings available.
- Secure the Canopy: Attach the included ropes to the canopy corners and stake them into the ground. Fill the four weight bags with sand or gravel and attach them to the canopy legs for added stability.
Figure 1: The patented Peak Push system allows for quick, one-person setup by pushing the center hub.
Figure 2: Step-by-step guide for easy one-person setup, from opening the frame to adjusting height.
Video 1: Demonstrates the setup process of the EAGLE PEAK 10x10 Pop Up Canopy Tent, including attaching a sidewall.
Video 2: Shows the quick and easy setup of the EAGLE PEAK 10x10 Pop Up Canopy.
Operating Instructions
The EAGLE PEAK canopy is designed for optimal performance and user comfort.
- Sun Protection: The CPAI-84 rated 150D silver-coated oxford top provides UPF 50+ sun protection, blocking harmful UV rays.
- Vented Design: A large vent at the peak allows heat to escape, keeping the area underneath cooler and improving stability in windy conditions.
- Adjustable Height: Utilize the three height settings on the legs to customize the canopy's height based on your needs and environmental conditions.
Figure 3: Dual air vents on the canopy top improve airflow and increase stability by allowing hot air to escape.
Figure 4: The silver-coated canopy top offers superior UV and heat protection, keeping you cooler under the sun compared to standard PU-coated tops.
Maintenance
Proper maintenance will extend the life of your EAGLE PEAK canopy tent.
- Cleaning: Clean the canopy fabric with mild soap and water. Do not use harsh chemicals or abrasive cleaners.
- Drying: Always ensure the canopy fabric is completely dry before folding and storing to prevent mildew and mold.
- Storage: Store the canopy in its wheeled carry bag in a cool, dry place away from direct sunlight when not in use.
- Frame Care: Periodically check the steel frame for any signs of rust or damage. Clean and lubricate moving parts as needed.
Troubleshooting
Here are solutions to common issues you might encounter.
- Canopy Instability: Ensure all legs are fully extended and locked. Use the provided stakes and ropes to anchor the canopy to the ground. Fill and attach the weight bags to the legs for additional stability, especially in windy conditions.
- Water Pooling on Top: The vented design helps prevent pooling. If water still collects, ensure the canopy is taut and the legs are extended to their maximum height.
- Difficulty Folding: Ensure all leg extensions are fully retracted and the center hub is disengaged by pressing the red button. Gently push the frame inwards from all sides.
Specifications
| Feature | Detail |
|---|---|
| Brand | EAGLE PEAK |
| Model Number | E100 |
| Size | 10x10 ft |
| Floor Area | 100 Square Feet |
| Occupancy | 8-10 People |
| Material | Alloy Steel, Polyester |
| Frame Material | Alloy Steel |
| Canopy Top | CPAI-84 rated 150D silver-coated oxford |
| UV Protection | UPF 50+ |
| Water Resistance Level | Water Resistant |
| Product Dimensions | 120"L x 120"W x 113.04"H |
| Item Weight | 33.6 pounds |
| Included Accessories | Wheeled Carry Bag, 8 Stakes, 4 Ropes, 4 Weight Bags |
Figure 5: Overview of the 10x10 ft canopy dimensions, shade area, and key features like easy setup, portability, and resistance ratings.
Figure 6: The complete packing list for the EAGLE PEAK 10x10 Pop Up Canopy Tent.
Important Safety Information
Always ensure the canopy is properly anchored in windy conditions. Keep away from open flames and high heat sources. Do not leave the canopy unattended in windy or stormy weather. Always follow the manufacturer's instructions for setup, use, and dismantling.
Warranty and Support
EAGLE PEAK offers a 1-year limited after-sale protection from the date of purchase, covering frames, tops, and bags. For any questions or support, please contact our professional service team.
This product is sold by Eagle Peak and fulfilled by Amazon.
