Sharper Image LED Word Digital Clock Instruction Manual

Introduction

The Sharper Image LED Word Digital Clock displays time in five-minute increments using illuminated words instead of traditional numbers. This manual provides instructions for setting up, operating, and maintaining your clock.

Image: The Sharper Image LED Word Digital Clock, showcasing its unique word-based time display.

Package Contents

• 1x Sharper Image LED Word Digital Clock
• 1x USB Power Cable
• 1x USB Adapter

Image: The clock and its included power accessories.

Setup Instructions

1. Power Connection: Connect the included USB power cable to the clock and then to the USB adapter. Plug the adapter into a standard power outlet. The word display will flash twice upon successful connection.

   Image: Power input and control buttons on the side of the clock.

2. Initial Display: The clock will initially display "IT IS TWELVE O'CLOCK".
3. Setting the Time: Use the "Advance" (+) and "Reverse" (-) buttons located on the side of the clock to adjust the time. Press and hold the respective button to move the time forward or backward.

   Image: The side of the clock showing the power port and time adjustment buttons.

4. Confirming Time: Once the desired time is displayed, release the button. The clock will then display the time in five-minute segments.

For a visual guide on setting the time, please refer to the video below:

Operating Instructions

The Sharper Image LED Word Digital Clock displays time in a unique word format, updating every five minutes.

Reading the Clock:

• The clock changes its display every five minutes.
• Time is read from top to bottom.
• The display indicates time in terms of minutes past or minutes to the hour.
• For example:
  • "IT IS FIVE MINUTES PAST THREE"
  • "IT IS TWENTY MINUTES TO FOUR"

Image: Visual guide for understanding the word clock's time display.

Maintenance

This clock is designed for low maintenance. To clean, gently wipe the surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents.

Troubleshooting

• Clock Not Lighting Up: Ensure the USB power cable is securely connected to both the clock and the USB adapter, and that the adapter is plugged into a functional power outlet.
• Time Not Updating: Verify the clock is receiving continuous power. If power is interrupted, the clock may need to be reset using the (+) and (-) buttons.
• Brightness Adjustment: Some models may feature a dimmer function. Refer to the product packaging or manufacturer's website for specific instructions on adjusting brightness, if available.
• Battery Backup: The clock primarily operates via corded electric power. While the product specifications mention "3 Unknown batteries required," these are typically for backup to retain settings during power outages, not for continuous operation. Batteries are not included.

Specifications

Warranty and Support

This product comes with a Limited Warranty. For warranty claims, technical support, or further assistance, please contact Sharper Image customer service or visit their official website. Keep your purchase receipt for warranty validation.