Introduction
Thank you for choosing the Fila Unisex Watch 38-190-001. This manual provides detailed instructions for the proper setup, operation, and maintenance of your watch. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece.
This image displays the Fila Unisex Watch 38-190-001. The watch features a black case and strap with red and blue accents. The dial includes both analog hands and two digital displays. Key buttons are labeled 'RESET', 'MODE', 'ST/STP', and 'LIGHT'. The Fila logo is visible at the top of the dial. The watch face also indicates 'WR 100M' for water resistance and '1/100S CHRONO' for stopwatch functionality.
Watch Components
- MODE Button: Cycles through different functions (Time, Alarm, Stopwatch).
- ST/STP Button: Starts and stops the stopwatch, or adjusts settings in setting mode.
- RESET Button: Resets the stopwatch, or selects items in setting mode.
- LIGHT Button: Illuminates the digital display.
- Crown: Used for setting analog time.
Setup
Setting Analog Time
- Pull the crown out to the first position.
- Rotate the crown to adjust the hour and minute hands to the desired time.
- Push the crown back in to its normal position to start the analog timekeeping.
Setting Digital Time and Date
- Press the MODE button repeatedly until the digital time display flashes, indicating setting mode.
- Use the RESET button to cycle through the settings (hours, minutes, year, month, day).
- Use the ST/STP button to adjust the selected value.
- Once all settings are correct, press the MODE button again to exit setting mode.
Operating
Using the Stopwatch
- Press the MODE button until the stopwatch display appears (usually indicated by 'CHRONO' or 'STW').
- Press the ST/STP button to start the stopwatch.
- Press the ST/STP button again to stop the stopwatch.
- Press the RESET button to clear the stopwatch to zero.
Setting and Using the Alarm
- Press the MODE button until the alarm display appears (usually indicated by 'ALM').
- Press the RESET button to select the hour or minute setting.
- Use the ST/STP button to adjust the alarm hour and minute.
- Press the MODE button to confirm and activate the alarm.
- To turn the alarm on/off, in alarm mode, press the ST/STP button. An alarm icon will indicate if it's active.
Using the Backlight
Press the LIGHT button to illuminate the digital display for a few seconds in low-light conditions.
Water Resistance
This watch is water resistant up to 100 meters (WR 100M). This means it is suitable for swimming and snorkeling, but not for scuba diving. Do not operate buttons while the watch is submerged in water.
Maintenance
- Cleaning: Wipe the watch case and strap regularly with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and mild soap, then dry thoroughly.
- Avoid Chemicals: Do not expose the watch to solvents, detergents, perfumes, or cosmetic sprays, as these can damage the case, strap, or gaskets.
- Temperature Extremes: Avoid exposing the watch to extreme temperatures (hot or cold) for prolonged periods, as this can affect battery life and accuracy.
- Battery Replacement: The watch uses 1 Lithium Metal battery. When the display dims or functions become erratic, it is time to replace the battery. It is recommended to have battery replacement performed by a qualified watch technician to ensure proper sealing and water resistance.
- Storage: When not in use for an extended period, store the watch in a cool, dry place away from direct sunlight.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Digital display is dim or blank. | Low battery. | Replace the battery. |
| Analog hands are not moving. | Crown is pulled out; low battery. | Push the crown in; replace the battery. |
| Time is inaccurate. | Incorrect setting; strong magnetic fields. | Re-set the time; keep watch away from strong magnets. |
| Buttons are unresponsive. | Watch is wet; internal malfunction. | Ensure watch is dry before operating buttons; if issue persists, seek professional service. |
Specifications
- Model Number: 38-190-001
- Brand: Fila
- Type: Casual Watch
- Watch Shape: Round
- Dial Case Diameter Size: M (26 - 39 mm)
- Water Resistance: 100 meters (WR 100M)
- Battery: 1 Lithium Metal battery (included)
- Product Dimensions: 20 x 20 x 20 cm
- Item Weight: 100 g
- Country of Origin: China
Warranty and Support
This Fila watch is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase for specific terms and conditions, including the warranty period and coverage details. For warranty claims or technical support, please contact Fila customer service through their official website or authorized service centers.
Keep your proof of purchase for warranty validation.
