Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Rapoo M500 Multi-device Wireless Bluetooth Mouse. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Image: The Rapoo M500 Multi-device Wireless Bluetooth Mouse, showcasing its ergonomic design and grey finish.
What's in the Box
Upon opening the package, please verify that all the following items are included:
- Rapoo M500 Wireless Mouse
- USB Dongle (stored inside the mouse, near the batteries)
- 2 AA Batteries (pre-installed)
- User Manual (this document)
Setup Instructions
1. Battery Installation
The Rapoo M500 mouse comes with 2 AA batteries pre-installed. The USB dongle is also stored within the battery compartment for convenience.
- Locate the battery compartment cover on the underside of the mouse.
- Slide or lift the cover to open the compartment.
- Ensure the 2 AA batteries are correctly inserted according to the polarity markings (+/-).
- If using the 2.4GHz wireless connection, remove the USB dongle from its storage slot.
- Close the battery compartment cover securely.
2. Connecting Your Mouse
The Rapoo M500 supports multi-device connectivity via Bluetooth 3.0, Bluetooth 4.0, and a 2.4GHz USB dongle.
Image: Illustration of the Rapoo M500 mouse connecting to multiple devices (laptop, tablet, smartphone) via Bluetooth and 2.4GHz wireless.
2.1. 2.4GHz Wireless Connection (USB Dongle)
- Turn on the mouse using the power switch located on the underside.
- Insert the USB dongle into an available USB port on your computer.
- The computer should automatically detect and install the necessary drivers. The mouse will be ready for use.
2.2. Bluetooth Connection (Bluetooth 3.0 / 4.0)
- Turn on the mouse using the power switch on the underside.
- Press the device switch button (usually on the top or bottom of the mouse) to select a Bluetooth channel (e.g., B1 or B2). The indicator light will blink slowly.
- Press and hold the device switch button for approximately 3 seconds until the indicator light starts blinking rapidly. This indicates the mouse is in pairing mode.
- On your device (computer, tablet, smartphone), go to Bluetooth settings and search for new devices.
- Select "Rapoo M500" or a similar name from the list of available devices to pair.
- Once paired, the indicator light on the mouse will stop blinking and remain solid for a few seconds before turning off.
Operating Instructions
1. Button Functions
Image: An annotated diagram of the Rapoo M500 mouse, highlighting its left click, right click, DPI switch, scroll wheel, forward, and backward buttons, along with its dimensions.
- Left Click Button: Primary selection and activation.
- Right Click Button: Accesses contextual menus.
- DPI Switch Button: Adjusts cursor sensitivity.
- Scroll Wheel: Navigates vertically through documents and web pages.
- Forward Button: Navigates forward in web browsers or file explorers.
- Backward Button: Navigates backward in web browsers or file explorers.
2. DPI Adjustment
The Rapoo M500 features 4 adjustable DPI levels (600/1000/1300/1600) to suit your preference for cursor speed and precision.
Image: The Rapoo M500 mouse illustrating its silent click feature and the range of DPI settings from 600 to 1600.
To change the DPI setting, press the DPI Switch Button located on the top of the mouse, below the scroll wheel. Each press will cycle through the available DPI levels.
3. Multi-Device Switching
The mouse allows quick switching between up to 3 connected devices (2 Bluetooth, 1 2.4GHz USB dongle).
To switch between devices, simply short press the device switch button. The indicator light will show which channel is active.
4. Surface Compatibility
The Rapoo M500 is designed to work effectively on various surfaces.
Image: The Rapoo M500 mouse positioned on a desk, demonstrating its ability to track on various common surfaces.
Maintenance
1. Battery Replacement
The mouse is powered by 2 AA alkaline batteries, which can last up to 12 months under typical usage. When the mouse performance degrades or the indicator light signals low battery, it's time to replace them.
- Turn off the mouse using the power switch.
- Open the battery compartment cover on the underside.
- Remove the old AA batteries.
- Insert two new AA alkaline batteries, ensuring correct polarity.
- Close the battery compartment cover.
- Dispose of old batteries responsibly according to local regulations.
2. Cleaning
To maintain optimal performance and appearance, clean your mouse periodically.
- Ensure the mouse is turned off before cleaning.
- Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution.
- Avoid using harsh chemicals, abrasive cleaners, or spraying liquids directly onto the mouse.
- Clean the optical sensor on the underside with a dry cotton swab if tracking issues occur.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mouse not responding |
|
|
| Cursor movement is erratic or jumpy |
|
|
| Cannot connect via Bluetooth |
|
|
Specifications
| Feature | Detail |
|---|---|
| Brand | Rapoo |
| Model | M500 (RP M500 GR) |
| Connectivity Technology | Bluetooth (3.0/4.0), 2.4GHz Wireless (USB Dongle) |
| Movement Detection Technology | Optical |
| DPI Levels | 600, 1000, 1300, 1600 (Adjustable) |
| Special Features | Ergonomic Design, Silent Clicks, Multi-device Switching |
| Power Source | Battery Powered (2 x AA) |
| Battery Life | Up to 12 Months |
| Compatible Operating Systems | Windows 7/8/10/XP, Vista 7/8, Linux, macOS, Android |
| Dimensions (LxWxH) | 10.5 x 6.7 x 4.1 cm |
| Item Weight | 70 g |
| Hand Orientation | Ambidextrous |
Warranty and Support
For warranty information and technical support, please refer to the official Rapoo website or contact your local distributor. The product typically includes a manufacturer's warranty against defects in materials and workmanship.
Manufacturer: Shenzhen RAPOO Technology Co.Limited
Importer (India): Supertron Electronics PVT Limited
Please retain your proof of purchase for warranty claims.
