Lafuma LFM28726135
Lafuma Siesta Aircomfort Sunbed Instruction Manual
Model: LFM28726135
Product Overview
The Lafuma Siesta Aircomfort Sunbed is designed for comfort and versatility, suitable for various outdoor and indoor relaxation needs. It features a padded cushion for enhanced comfort and an adjustable backrest with four positions. The sunbed is foldable for convenient storage and portability.
Key Features:
- Padded Comfort: Equipped with 3 cm high-density foam padded cushions for flexible and pleasant support.
- Adjustable Backrest: Offers four recline positions to suit individual preferences.
- Foldable Design: Ultra-compact when folded, facilitating easy transport and storage.
- Versatile Use: Suitable for pool decks, gardens, camping, or as a spare bed.
Safety Information
WARNING: Always ensure the chair is fully opened and locked before use. Do not exceed the maximum weight limit of 309 lbs (140 kg). Keep the chair away from heat sources and sharp objects to prevent damage. Store the chair in a dry place when not in use. Never leave the chair unattended with children or pets. Always follow the manufacturer's instructions for proper assembly, use, and maintenance.
Setup Instructions
- Unfolding the Sunbed:
Carefully remove the sunbed from its packaging. Place the folded sunbed on a flat, stable surface. Gently pull the frame apart until the sunbed begins to unfold. Ensure all legs are fully extended and locked into place before use. Verify that the backrest mechanism is securely engaged.
Image: The Lafuma Siesta Aircomfort Sunbed shown fully unfolded and ready for use. The padded black cushion is visible on the steel frame.
- Positioning:
Place the sunbed on a level surface to prevent tipping. For outdoor use, consider placing it on a patio, deck, or firm ground. Avoid uneven or soft surfaces.
Image: The Lafuma Siesta Aircomfort Sunbed positioned on a wooden deck, surrounded by greenery, with a small side table. The backrest is slightly reclined.
Operating Instructions
- Adjusting the Backrest:
The Lafuma Siesta Sunbed features a four-position adjustable backrest. To adjust, slightly lift the backrest and move it to the desired position. Ensure the mechanism clicks securely into place at each setting. Do not force the adjustment. If resistance is met, re-evaluate the position and try again.
- Folding for Storage:
To fold the sunbed, ensure the backrest is in its most upright position. Locate the folding mechanisms (usually near the joints of the frame). Release these mechanisms and gently push the frame inwards until the sunbed is fully collapsed into its compact form. Store in a dry, protected area.
Image: The Lafuma Siesta Aircomfort Sunbed shown in its compact, folded state, highlighting its portability and ease of storage.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your Lafuma Siesta Aircomfort Sunbed.
- Cleaning: Wipe clean with a damp cloth. For stubborn stains on the Aircomfort fabric, use mild soap and water, then rinse thoroughly and allow to air dry completely before folding or storing. Avoid harsh chemicals or abrasive cleaners.
- Frame Care: Inspect the steel tubing periodically for any signs of rust or damage. Clean the frame with a damp cloth. If necessary, apply a rust-inhibiting spray to any exposed metal parts to prevent corrosion.
- Storage: When not in use, especially during adverse weather conditions or off-season, store the folded sunbed in a dry, protected environment to prevent damage from moisture, extreme temperatures, or UV exposure.
- Mechanism Check: Periodically check all moving parts and locking mechanisms to ensure they operate smoothly and securely. Lubricate joints if necessary with a silicone-based spray.
Troubleshooting
This section addresses common issues you might encounter with your Lafuma Siesta Aircomfort Sunbed.
| Problem | Possible Cause | Solution |
|---|---|---|
| Sunbed does not unfold or fold smoothly. | Mechanisms are stiff or obstructed. | Ensure no debris is blocking the joints. Apply a silicone-based lubricant to moving parts. Do not force the mechanism. |
| Backrest does not lock into position. | Mechanism not fully engaged or obstructed. | Lift the backrest slightly higher and re-engage the locking mechanism. Check for any obstructions. |
| Squeaking noises during use. | Dry joints or loose connections. | Lubricate all pivot points and joints with a silicone-based spray. Check that all frame connections are secure. |
Specifications
| Brand: | Lafuma |
| Model Name: | LFM28726135 |
| Color: | Acier (Black) |
| Product Dimensions (Unfolded): | 5.51"D x 28.74"W x 46.06"H (14 cm D x 73 cm W x 117 cm H) |
| Item Weight: | 19.4 pounds (8.8 kg) |
| Maximum Weight Recommendation: | 310 Pounds (140 kg) |
| Material: | Steel tubing, Aircomfort fabric (Foam fill) |
| Reclining Positions: | 4 |
| Foldable: | Yes |
| Indoor/Outdoor Usage: | Outdoor |
Dimensional Drawing:
Image: Technical drawing illustrating the dimensions of the Lafuma Siesta Aircomfort Sunbed in both unfolded and folded states, with measurements in centimeters.
Product Video
Video: An overview of Lafuma's manufacturing process and product features, demonstrating the quality and design of their furniture, including the Siesta sunbed. This video highlights the brand's commitment to comfort, practicality, and environmental responsibility.
Warranty and Support
For warranty information, product support, or to inquire about replacement parts, please refer to the official Lafuma website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
Lafuma Official Website: www.lafuma-mobilier.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.