1. Introduction
This manual provides essential instructions for the assembly, safe use, and maintenance of your Walker Edison Alexander Classic Solid Wood Stackable Jr Twin over Twin Bunk Bed. Please read all instructions carefully before assembly and retain this manual for future reference.
Image 1.1: The Walker Edison Alexander Classic Solid Wood Stackable Jr Twin over Twin Bunk Bed in Walnut finish.
2. Safety Information
WARNING: Failure to follow these warnings and instructions could result in serious injury or death.
- Always use the guardrails on the upper bunk to prevent falls.
- Ensure the bed is properly assembled and all fasteners are securely tightened to avoid instability.
- Be cautious when using the ladders. Ensure they are securely attached and used correctly.
- The top bunk is not suitable for children under 6 years of age.
- Periodically check and ensure that the guardrail, ladder, and other components are in their proper position and free from damage.
- Do not allow more than one person on the upper bunk.
- Use only mattresses that are 5" to 9" thick.
- The maximum weight capacity for each twin bed is 200 lbs.
- Do not attach or suspend anything from any part of the bunk bed that is not designed for use with the bed; for example, but not limited to, hooks, belts, or jump ropes.
Image 2.1: Detail of the integrated guardrail on the upper bunk, designed for user safety.
3. Product Specifications
| Feature | Detail |
|---|---|
| Model Number | BWJRTOTWT |
| Brand | Walker Edison |
| Dimensions (L x W x H) | 78" x 44" x 48" |
| Size | Twin over Twin |
| Color | Walnut |
| Material | Solid Pine Wood |
| Finish Type | Painted |
| Weight Capacity (Each Bed) | Up to 200 lbs |
| Recommended Mattress Thickness | 5" - 9" |
| Box Spring Required | No (Bunkie board recommended) |
| Assembly Required | Yes |
| Item Weight | 110 pounds |
| UPC | 842158185181 |
Image 3.1: Product dimensions for the Alexander Classic Bunk Bed.
4. Setup & Assembly
Assembly of the Walker Edison Alexander Bunk Bed is required. It is recommended to have two adults for assembly. Please follow the detailed instructions provided in the official Installation Manual (PDF) for a smooth and safe setup process.
- Before You Begin: Unpack all components and verify against the parts list in the Installation Manual. Ensure all hardware is present.
- Tools Required: Typically, an Allen wrench (often included) and a Phillips head screwdriver are needed. An impact driver can expedite the process but use with caution to avoid overtightening.
- Assembly Steps: Refer to the step-by-step diagrams and instructions in the Installation Manual. Pay close attention to the orientation of parts, especially side rails and ladder placement.
- Secure Fasteners: Ensure all bolts, screws, and connectors are tightened securely. Periodically re-tighten fasteners to maintain structural integrity.
- Slat Installation: Install bed slats evenly and securely. A bunkie board is recommended for optimal mattress support and to extend mattress life.
For a complete guide, download the official Installation Manual (PDF).
Image 4.1: The assembled bunk bed, ready for use.
5. Operating Instructions
Proper use of your bunk bed ensures safety and longevity.
- Mattress Placement: Place a twin-sized mattress on each bunk. Ensure the mattress thickness is between 5 and 9 inches to maintain adequate guardrail height on the upper bunk.
- Weight Limits: Adhere strictly to the 200 lbs weight limit for each bunk. Overloading can compromise the bed's structure and safety.
- Ladder Use: Always use the integrated ladders for accessing the upper bunk. Do not climb on the side rails or other parts of the bed.
- Guardrails: The upper bunk is equipped with guardrails. Ensure they are always in place and secure.
- Lower Bunk Access: The lower bunk sits close to the ground, making it easily accessible for younger children.
Image 5.1: The bunk bed in a bedroom setting, illustrating its low-profile design for the bottom bunk.
6. Maintenance
Regular maintenance helps preserve the condition and safety of your bunk bed.
- Cleaning: Wipe the wood surfaces with a dry cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Fastener Checks: Periodically (e.g., every 3-6 months) check all bolts and screws to ensure they remain tight. Re-tighten as necessary.
- Structural Integrity: Inspect the bed frame, slats, guardrails, and ladders for any signs of wear, damage, or loose connections. Address any issues promptly.
- Wood Care: The bed is made from solid pine wood. Protect it from extreme temperature changes and direct sunlight to prevent warping or fading.
Image 6.1: Detail of the walnut finish on the solid pine wood.
7. Troubleshooting
This section addresses common issues you might encounter.
- Bed feels wobbly or unstable:
- Ensure all assembly hardware (bolts, screws) are fully tightened.
- Verify that all parts are correctly oriented and assembled according to the manual.
- Check for any damaged components. If found, contact customer support for replacement parts.
- Slats making noise or feeling weak:
- Confirm that all slats are properly seated and secured to the side rails.
- Ensure the mattress thickness is within the recommended 5-9 inches.
- Consider using a bunkie board for additional support if slats feel insufficient.
- Difficulty with assembly:
- Re-read the Installation Manual carefully, paying attention to diagrams and part numbers.
- Ensure you have the correct tools.
- If a part seems misaligned or defective, do not force it. Contact customer support for assistance or replacement.
- Unpleasant odor from the bed:
- New furniture can sometimes have an initial odor. Ensure the room is well-ventilated.
- The odor should dissipate over a few days to a week.
8. Warranty Information
This product is covered by a 30-day limited manufacturer warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for any warranty claims.
For specific details regarding warranty coverage and claims, please contact Walker Edison customer support.
9. Customer Support
If you have any questions, require assistance with assembly, or need replacement parts, please contact Walker Edison customer support.
Image 9.1: Walker Edison Customer Support Contact Information.
- Phone: 1-801-433-3008
- Email: service@walkeredison.com
- Replacement parts are available. Please contact Walker Edison within 30 days of delivery for part requests.
