1. Introduction
This manual provides detailed instructions for the assembly, operation, and care of your Walker Edison 3-Drawer Mid Century Modern Wood TV Stand. Designed to accommodate TVs up to 65 inches, this 58-inch caramel finish entertainment center offers functional storage and a timeless aesthetic. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Image 1.1: Front view of the Walker Edison 3-Drawer Mid Century Modern Wood TV Stand in caramel finish.
2. Safety Information
WARNING: To prevent injury, always assemble this product according to the instructions provided. Ensure the TV stand is securely assembled and the TV is properly placed on it to prevent tipping. Keep the area around the TV stand clear of items that could pose a hazard if the TV were to tip over.
- Always place the TV stand on a flat, stable surface.
- Do not exceed the maximum weight limit of 250 pounds.
- Ensure all screws and fasteners are tightened securely during assembly and periodically check for tightness.
- Keep small parts and packaging materials away from children during assembly.
- This product is designed for indoor use only.
3. Package Contents
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support immediately.
- All necessary wood panels and components for the TV stand structure.
- Hardware Pack (screws, dowels, cam locks, etc.)
- Assembly Guide
Image 3.1: The TV stand integrated into a living room setting, showcasing its functional design.
4. Specifications
| Feature | Detail |
|---|---|
| Brand | Walker Edison |
| Model Name | 3-Drawer Mid Century Modern Wood TV Stand |
| Model Number | W58IV3DCA |
| Color | Caramel |
| Product Dimensions | 58 x 16 x 24 inches (Length x Width x Height) |
| Item Weight | 64 pounds |
| Weight Limit | 250 Pounds |
| Material | Pine Wood (Top Material Type), Wood (Frame Material) |
| Finish Type | Stained Walnut |
| Recommended TV Size | Up to 65 inches |
| Number of Drawers | 3 |
| Number of Shelves | 2 (open shelves) |
| Special Features | Adjustable shelf, cable management system |
| Assembly Required | Yes |
Image 4.1: Detailed dimensions of the TV stand.
Image 4.2: Visual guide for TV stand dimensions and compatible TV sizes.
5. Setup and Assembly
Assembly is required for this TV stand. Please refer to the included Assembly Guide for step-by-step instructions. It is recommended to have a second person assist with assembly, especially when handling larger components.
- Preparation: Clear a spacious area for assembly. Lay out all components and hardware.
- Tools Required: A screwdriver is typically needed. Power tools are not recommended for soft pine wood to prevent damage.
- Follow the Guide: Adhere strictly to the sequence of steps outlined in the Assembly Guide.
- Secure Fasteners: Ensure all cam bolts, screws, and dowels are properly aligned and tightened. Do not overtighten.
- Leg Attachment: Pay close attention to the leg attachment process. Ensure dowels are used if indicated in the guide for proper stability.
If you encounter any difficulties or have questions during assembly, please contact customer support.
6. Operating Instructions
6.1 Placement and Weight Distribution
- Place your television centrally on the top surface of the stand.
- Ensure the TV base fits entirely within the stand's top surface.
- Distribute weight evenly across the shelves and drawers. Do not overload any single section.
- The maximum weight capacity for the entire unit is 250 pounds.
6.2 Storage and Organization
The TV stand features three easy-access drawers and two open shelves for organizing media devices, accessories, and other items.
Image 6.1: Detail of a drawer with a cutout handle.
Image 6.2: View of an open shelf, highlighting the adjustable shelf feature.
6.3 Cable Management
Utilize the integrated cord management system to keep cables tidy and out of sight. The back panel includes cut-outs for routing wires from your electronic devices.
Image 6.3: Rear view illustrating the cord management feature.
7. Maintenance
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the stained walnut finish.
- Spills: Clean spills immediately to prevent staining.
- Protection: Use coasters under beverages to protect the wood surface.
- Fastener Check: Periodically check all assembly fasteners to ensure they remain tight. Retighten if necessary.
- Environmental Conditions: Avoid placing the stand in direct sunlight or near heat sources to prevent warping or fading.
8. Troubleshooting
- Wobbly Stand: Ensure the stand is on a level surface. Check all fasteners for tightness and retighten if loose. If legs are uneven, shims may be used.
- Drawers Sticking: Verify that drawer slides are properly installed and aligned. Ensure no debris is obstructing the drawer's movement.
- Missing Parts: If any parts were missing upon delivery, refer to the "Support" section to contact customer service for replacements.
- Damage During Assembly: If a component is damaged during assembly, stop and contact customer support. Do not attempt to force parts together.
9. Warranty Information
This product is covered by a 30-day limited manufacturer warranty. This warranty covers defects in materials and workmanship under normal use. For warranty claims or questions, please contact Walker Edison customer support within 30 days of delivery.
10. Support
For assistance with assembly, missing parts, or any product-related inquiries, please contact Walker Edison customer support.
Image 10.1: Walker Edison customer support contact details.
Phone: 1-801-433-3008
Email: service@walkeredison.com
Replacement parts are available. Please contact Walker Edison within 30 days of delivery for assistance.
