Introduction
This manual provides detailed instructions for the LUME CUBE 1.0 Professional LED Lighting Kit, Model LC-PROLK. This kit is designed to provide versatile and high-quality lighting for various photography and videography applications. Please read this manual thoroughly before using the product to ensure proper operation and longevity.
Package Contents
The LUME CUBE 1.0 Professional LED Lighting Kit includes the following components:
- 2x LUME CUBE 1.0 LED Lights
- 2x USB Charging Cables
- Carry Case
- DSLR Mount
- Diffusion Gels
- Color Gels
- Snoots
- Barn Doors
- Honeycomb Grids
- Dome Diffusers
- Modi Frames (for attaching accessories)
Image: All components of the LUME CUBE 1.0 Professional LED Lighting Kit, including two Lume Cubes, various diffusers, gels, snoots, barn doors, and charging cables.
Image: The LUME CUBE 1.0 Professional LED Lighting Kit with its components, including two Lume Cubes, diffusers, and snoots, organized within the custom-fit carry case.
Setup
1. Charging the Lume Cubes
Before initial use, fully charge both Lume Cubes. Connect the provided USB charging cables to the charging port on each Lume Cube and to a standard USB power source. The indicator light will show charging status. A full charge typically takes 45-60 minutes.
2. Attaching Accessories
The Lume Cube 1.0 uses a magnetic system for attaching various light modifiers. Ensure the Modi Frame is securely attached to the Lume Cube before adding other accessories.
- Diffusers and Gels: Place the desired diffuser or gel into the Modi Frame. The magnetic attachment will secure it.
- Snoots: Attach the snoot to the Modi Frame to create a focused beam of light.
- Barn Doors: Attach the barn doors to the Modi Frame to control light spill and shape the light output.
- Honeycomb Grids: Use the honeycomb grid to further control light direction and reduce spill.
Image: A LUME CUBE 1.0 with a snoot accessory attached, designed to narrow and direct the light output.
Image: A LUME CUBE 1.0 with barn doors attached, providing adjustable flaps to shape and control the light beam.
Image: A LUME CUBE 1.0 with a honeycomb grid accessory, used to create a more focused and directional light output.
Image: A LUME CUBE 1.0 with a dome diffuser attached, designed to soften and spread the light for a more even illumination.
Image: A LUME CUBE 1.0 with an orange color gel attached, used to modify the color temperature of the light.
Image: A LUME CUBE 1.0 shown with a selection of color gels (blue, red, yellow) that can be attached to alter the light's hue.
Image: Two LUME CUBE diffusers, labeled "DIFFUSION LIGHT" and "DIFFUSION STRONG," offering varying levels of light softening.
3. Mounting the Lume Cubes
The Lume Cubes feature a standard 1/4"-20 tripod mount on the bottom, allowing attachment to various camera accessories, including the included DSLR Mount or other compatible tripods and stands.
- DSLR Mount: Attach the Lume Cube to your camera's hot shoe using the provided DSLR Mount.
- Other Mounts: Secure the Lume Cube to any compatible mount with a 1/4"-20 screw.
Operating Instructions
1. Power On/Off and Brightness Adjustment
Each Lume Cube has a power button and controls for brightness adjustment.
- Power On: Press and hold the power button until the light illuminates.
- Brightness Levels: Cycle through 4 distinct brightness levels by pressing the brightness control buttons.
- Strobe Mode: Activate strobe mode for special effects by pressing the designated strobe button or cycling through modes.
- Power Off: Press and hold the power button until the light turns off.
2. Bluetooth Connectivity and App Control
The Lume Cubes can be controlled wirelessly via the Lume-X App, available for both iPhone and Android devices.
- Download the Lume-X App from your device's app store.
- Ensure Bluetooth is enabled on your smartphone or tablet.
- Power on your Lume Cubes.
- Open the Lume-X App and follow the on-screen instructions to pair your Lume Cubes.
- Once paired, you can control brightness, modes, and other settings directly from the app.
3. Waterproof Operation
The Lume Cube 1.0 is designed with a durable housing that provides waterproof capabilities up to 10 meters (30 feet) depth. Ensure all port covers are securely closed before submerging the device in water.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the Lume Cubes and accessories. For stubborn dirt, a slightly damp cloth can be used, ensuring no moisture enters the charging port.
- Battery Care: To prolong battery life, avoid fully discharging the Lume Cubes frequently. Store them with a partial charge if not used for extended periods.
- Storage: Store the Lume Cubes and accessories in the provided carry case to protect them from dust and physical damage.
Troubleshooting
- Lume Cube does not turn on:
- Ensure the Lume Cube is fully charged. Connect it to a power source using the USB cable and check the charging indicator.
- Cannot connect via Bluetooth:
- Verify Bluetooth is enabled on your mobile device.
- Ensure the Lume Cube is powered on and within range.
- Restart both the Lume Cube and your mobile device.
- Try unpairing and re-pairing the device in the Lume-X App.
- Lume Cube overheats and shuts off:
- High brightness settings or prolonged use in warm environments can cause the Lume Cube to heat up. If it shuts off due to overheating, allow it to cool down before resuming use. Consider reducing brightness or operating in a cooler environment.
- Accessories do not attach securely:
- Ensure the Modi Frame is correctly attached to the Lume Cube. Check that the magnets on both the Modi Frame and the accessory are clean and free from debris.
Specifications
| Model Number | LC-PROLK |
| Brand | LUME CUBE |
| Light Output | Daylight Balanced 5600K |
| Brightness Levels | 4 levels + Strobe mode |
| Connectivity | Bluetooth |
| Waterproof Depth | Up to 10 meters (30 feet) |
| Batteries | 2 Lithium Polymer (included) |
| Charging Time | Approximately 45-60 minutes |
| Item Weight | 6.7 ounces (per Lume Cube) |
| Product Dimensions | 10.24 x 4.33 x 8.66 inches (packaging/kit dimensions) |
| Compatible Mount Type | Hot Shoe (with adapter), 1/4"-20 Thread |
Warranty and Support
The LUME CUBE 1.0 Professional LED Lighting Kit comes with a one-year limited warranty. For warranty claims or technical support, please refer to the official LUME CUBE website or contact their customer service department. Retain your proof of purchase for warranty validation.
For further assistance, visit the LUME CUBE Store on Amazon.
