Introduction
This manual provides instructions for the Timex Chronograph Quartz Watch, Model TW2T10700. It covers essential information for setting up, operating, maintaining, and troubleshooting your watch. Please read this manual carefully to ensure proper use and longevity of your timepiece.
Setup
1. Setting the Time
- Pull the crown (B) out to the furthest position.
- Turn the crown (B) clockwise or counter-clockwise to set the hour and minute hands to the correct time.
- Push the crown (B) back in to the normal position to start the watch.
2. Setting the Date
- Pull the crown (B) out to the middle position.
- Turn the crown (B) counter-clockwise to set the date.
- Once the date is set, push the crown (B) back in to the normal position.
3. Adjusting the Nylon Strap
The watch features a durable nylon strap with a buckle closure. To adjust the fit, simply thread the strap through the buckle and secure it at a comfortable length on your wrist. Ensure the watch is snug but not overly tight to allow for proper circulation.
Image: The Timex TW2T10700 watch displayed on a wrist, illustrating how the watch appears when worn and how the strap fits.
Operating Instructions
1. Using the Chronograph (Stopwatch)
The chronograph function allows you to measure elapsed time. The watch features two pushers (A and C) and a crown (B) for operation.
- Start: Press pusher (A) to start the chronograph. The chronograph second hand will begin to move.
- Stop: Press pusher (A) again to stop the chronograph. The elapsed time will be displayed.
- Reset: After stopping, press pusher (C) to reset all chronograph hands to their zero positions.
2. Using INDIGLO Night-Light
The INDIGLO night-light illuminates the watch dial for easy reading in low-light conditions.
- Press and hold the crown (B) to activate the INDIGLO night-light. The light will remain on as long as the crown is pressed.
Image: Side view of the Timex TW2T10700 watch, highlighting the crown (B) and the two pushers (A and C) used for time setting and chronograph operation.
Maintenance
1. Water Resistance
This watch is water resistant to 30 meters (3 ATM). This means it is suitable for everyday use and can withstand splashes or brief immersion in water. It is not suitable for swimming, showering, or diving. Avoid operating the crown or pushers when the watch is wet to prevent water intrusion.
2. Strap Care
The nylon strap is durable but can accumulate dirt. To clean, gently wipe the strap with a damp cloth and mild soap. Allow it to air dry completely before wearing. Avoid harsh chemicals or excessive scrubbing.
Image: A close-up view of the Timex TW2T10700's nylon strap and buckle, showing the texture and construction of the band.
3. Battery Replacement
The watch is powered by a quartz movement. When the watch stops running, the battery may need replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and water resistance.
4. Cleaning the Watch Case
Wipe the watch case with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used. Avoid abrasive materials that could scratch the mineral crystal or case finish.
Troubleshooting
- Watch Not Running: Check if the crown is fully pushed in. If it is, the battery may need replacement.
- Chronograph Hands Not Resetting to Zero: If the chronograph hands do not return to their zero position after pressing pusher (C), they may need calibration. Consult a watch technician for adjustment.
- Date Not Changing: Ensure the time is set correctly, passing midnight will advance the date. If the date is stuck, try resetting it manually as per the 'Setting the Date' instructions.
- INDIGLO Light Not Working: If the INDIGLO light does not activate when the crown is pressed, the battery may be low or depleted.
Specifications
| Feature | Specification |
|---|---|
| Model Number | TW2T10700 |
| Movement Type | Quartz |
| Display Type | Analog |
| Case Diameter | 40 mm |
| Case Thickness | 15 mm |
| Band Material | Fabric (Nylon) |
| Band Width | 20 mm |
| Crystal Material | Mineral |
| Water Resistance Depth | 30 Meters (3 ATM) |
| Special Features | INDIGLO Light, Chronograph (Stopwatch), Date Display |
| Item Weight | 40 g |
Warranty Information
This Timex watch comes with a 2-year manufacturer's warranty from the date of purchase. The warranty covers manufacturing defects under normal use. It does not cover damage resulting from improper handling, accidents, unauthorized repairs, or normal wear and tear of the strap or battery.
Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Timex warranty documentation provided with your watch or visit the official Timex website.
Customer Support
For further assistance, technical support, or service inquiries regarding your Timex TW2T10700 watch, please contact Timex customer service or visit their official website.
Manufacturer: Timex
You can find more information and contact details on the Official Timex Store on Amazon.
