Fastrack Denim Quartz Analog Digital Watch

1. Introduction

This manual provides detailed instructions for the proper setup, operation, and maintenance of your Fastrack Denim Quartz Analog Digital Watch, Model NN38035SL05. Please read this guide thoroughly to ensure optimal performance and longevity of your timepiece.

2. Product Overview

Image 1: Front view of the Fastrack Denim Quartz Analog Digital Watch, Model NN38035SL05. The watch features a blue denim strap, a black dial with both analog hands and a digital display, and multiple function buttons on the side of the case.

2.1. Components

• Analog Display: Hour, minute, and second hands.
• Digital Display: Shows time, date, day, and other digital functions.
• Crown: Used for setting analog time. Located on the right side of the watch case.
• Buttons:
  • RESET (Top Left): Used for resetting stopwatch, adjusting settings.
  • ST/STP (Top Right): Used for starting/stopping stopwatch, selecting settings.
  • MODE (Bottom Left): Used for cycling through digital display modes (Time, Stopwatch, Alarm).
  • LIGHT (Bottom Right): Activates the backlight for the digital display.
• Denim Strap: Durable fabric strap for comfortable wear.
• Water Resistance Mark: "WR50M" indicating 50-meter water resistance.

2.2. Key Features

• Dual Time Display: Analog and Digital
• Quartz Movement for precise timekeeping
• Durable Brass Case with Mineral Glass Dial
• Water Resistance up to 50 meters (5 ATM)
• Functions include Time, Date, Day, Stopwatch, and Alarm
• Backlight for digital display visibility in low light

3. Setup

3.1. Setting Analog Time

1. Pull the crown out to the first position.
2. Rotate the crown to adjust the hour and minute hands to the desired time.
3. Once the time is set, push the crown back into its normal position.

3.2. Setting Digital Time and Date

1. Press the MODE button repeatedly until the digital display shows the time setting mode (usually indicated by flashing digits).
2. Press the RESET button to select the digit or setting you wish to adjust (e.g., seconds, hour, minute, month, date, day). The selected item will flash.
3. Use the ST/STP button to increase the value of the flashing digit. Hold the button to advance rapidly.
4. Repeat steps 2 and 3 until all desired time and date settings are correct.
5. Press the MODE button to exit the setting mode and return to the normal time display.

4. Operating Instructions

4.1. Switching Modes

Press the MODE button to cycle through the available digital functions:

• Normal Time Display (Hour, Minute, Second, Day, Date)
• Stopwatch Mode
• Alarm Mode

4.2. Stopwatch Function

1. Enter Stopwatch Mode by pressing the MODE button until "ST" or "STOP" appears on the digital display.
2. Press the ST/STP button to start the stopwatch.
3. Press the ST/STP button again to pause the stopwatch.
4. Press the ST/STP button to resume timing.
5. To reset the stopwatch to zero, press the RESET button while the stopwatch is paused.

4.3. Alarm Function

1. Enter Alarm Mode by pressing the MODE button until "AL" or "ALARM" appears on the digital display.
2. Press the RESET button to select the hour or minute digits for adjustment. The selected digit will flash.
3. Use the ST/STP button to set the desired alarm time.
4. Press the MODE button to confirm and exit alarm setting.
5. To activate/deactivate the alarm, press the ST/STP button while in Alarm Mode (without flashing digits). An alarm icon will typically appear when activated.

4.4. Backlight

Press the LIGHT button (bottom right) to illuminate the digital display for a few seconds, improving visibility in dark conditions.

5. Maintenance

5.1. Cleaning

Wipe the watch case and strap with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid using chemical cleaners, solvents, or abrasive materials, as these can damage the watch's finish or internal components.

5.2. Water Resistance

This watch is water resistant to 50 meters (5 ATM). This rating means it is suitable for short periods of recreational swimming. It is not suitable for diving, snorkeling, or prolonged water activities. Do not operate any buttons or the crown while the watch is submerged in water or wet, as this can compromise the water resistance seal.

5.3. Battery Replacement

The watch uses a Lithium Metal battery. When the digital display becomes dim or the watch stops functioning, the battery may need replacement. It is highly recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.

6. Troubleshooting

7. Specifications

• Model Number: NN38035SL05
• Movement Type: Quartz (Analog & Digital)
• Dial Color: Black
• Case Material: Brass
• Case Diameter: 47.3 millimeters
• Dial Glass Material: Mineral
• Band Material: Fabric (Denim)
• Band Color: Blue
• Water Resistance Depth: 50 meters (5 ATM)
• Battery Type: 1 Lithium Metal battery (included)
• Item Weight: 180 grams (0.18 Kilograms)
• Manufacturer: Titan
• Date First Available: 25 January 2019

8. Warranty and Support

This Fastrack watch comes with a manufacturer's warranty. For specific warranty terms, duration, and service procedures, please refer to the warranty card included with your purchase or contact Fastrack customer support directly. Keep your purchase receipt as proof of purchase for warranty claims.

For further assistance or inquiries, please visit the official Fastrack website or contact their authorized service centers.