Introduction
This manual provides comprehensive instructions for the Fastrack Denim Analog-Digital Men's Watch, model NP38034NL01. Please read this manual carefully to ensure proper use and maintenance of your watch. Keep this manual for future reference.
Product Overview
The Fastrack Denim Analog-Digital Watch combines classic analog timekeeping with modern digital functions. It features an orange dial, a durable fabric band, and is water-resistant up to 50 meters.
Image 1: Front view of the Fastrack Denim Analog-Digital Men's Watch. The watch features a round black case, an orange dial with analog hands, and a digital display. The strap is made of blue denim fabric. Several pushers are visible on the sides of the case.
Image 2: Back view of the Fastrack Denim Analog-Digital Men's Watch. This image shows the stainless steel case back, the denim strap with its inner lining, and the buckle mechanism.
Setup and Initial Configuration
Before using your watch, ensure the time and date are correctly set.
1. Setting Analog Time
- Pull out the crown (the knob on the right side of the watch case) to the first or second click position.
- Rotate the crown to adjust the hour and minute hands to the correct time.
- Push the crown back into its normal position to start the watch.
2. Setting Digital Time and Date
The digital display has multiple modes. Refer to the watch's pushers (buttons) for navigation.
- Mode Button: Typically located on the bottom left, cycles through modes (Time, Date, Alarm, Stopwatch).
- Adjust Button: Typically located on the top left, used to enter setting mode.
- Set/Start Button: Typically located on the top right, used to adjust values or start/stop functions.
- Light Button: Typically located on the bottom right, activates the backlight.
- Press the Mode button until the digital time display is shown.
- Press and hold the Adjust button until the seconds begin to flash, indicating setting mode.
- Press the Mode button to cycle through the settings: seconds, hour, minute, year, month, day.
- Use the Set/Start button to increase the flashing value.
- Once all settings are correct, press the Adjust button again to exit setting mode.
Operating Instructions
1. Using Digital Modes
Press the Mode button to cycle through the following functions:
- Time Display: Shows current digital time (hour, minute, second) and day of the week.
- Date Display: Shows month, day, and year.
- Alarm Mode: Allows setting a daily alarm.
- In Alarm Mode, press Adjust to enter setting mode.
- Use Mode to select hour/minute, and Set/Start to adjust.
- Press Adjust to confirm.
- Stopwatch Mode: Measures elapsed time.
- In Stopwatch Mode, press Set/Start to start/stop the timer.
- Press Adjust to reset the stopwatch.
2. Backlight Function
Press the Light button (bottom right) to illuminate the digital display for a few seconds in low-light conditions.
Maintenance and Care
- Cleaning: Wipe the watch case and strap with a soft, dry cloth. For the fabric strap, a slightly damp cloth can be used, but ensure it dries completely to prevent odor or damage.
- Water Resistance: This watch is water-resistant up to 50 meters (5 ATM). It is suitable for short periods of recreational swimming, but not for diving or snorkeling. Do not operate buttons or the crown while the watch is wet or submerged.
- Temperature: Avoid exposing the watch to extreme temperatures (hot or cold) or sudden temperature changes.
- Chemicals: Keep the watch away from solvents, detergents, perfumes, and cosmetics, as these can damage the case, strap, or seals.
- Battery Replacement: The watch uses a Lithium Metal battery. Battery replacement should be performed by a qualified watch technician to ensure water resistance is maintained.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Analog hands not moving | Battery depleted; Crown pulled out; Mechanical issue. | Push crown in; Replace battery; Consult service center. |
| Digital display is blank or dim | Battery depleted; Extreme temperature exposure. | Replace battery; Allow watch to return to normal temperature. |
| Time is inaccurate | Incorrect setting; Strong magnetic fields; Battery low. | Reset time; Avoid magnetic fields; Replace battery. |
| Water inside the watch | Crown/buttons operated underwater; Seals compromised. | Immediately take to a service center. Do not attempt to dry it yourself. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | NP38034NL01 |
| Display Type | Analog-Digital |
| Movement Type | Quartz |
| Dial Color | Orange |
| Case Material | Brass |
| Case Diameter | 46.2 Millimeters |
| Case Thickness | 15.3 Millimeters |
| Band Material | Fabric |
| Band Color | Blue |
| Water Resistance Depth | 50 Meters (5 ATM) |
| Battery Type | Lithium Metal (1 required, included) |
| Item Weight | 160 grams |
| Manufacturer | Titan |
Warranty Information
This Fastrack watch comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. Keep your purchase receipt as proof of purchase for warranty claims.
Customer Support
For further assistance, service, or warranty claims, please contact Fastrack customer support or visit an authorized service center. Contact details can typically be found on the Fastrack official website or on your warranty documentation.
You can also visit the Fastrack Store on Amazon for more product information.
