Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Moen Genta LX Brushed Nickel Two-Handle Three-Hole Widespread Modern Bathroom Sink Faucet. Designed for contemporary and transitional spaces, this faucet offers precise control over water temperature and flow, combining elegant design with durable performance. Please read this manual thoroughly before beginning installation or operation.
Figure 1: Moen Genta LX Brushed Nickel Two-Handle Three-Hole Widespread Modern Bathroom Sink Faucet.
Key Features
- Durable Construction: Built with durable metal materials for long-term reliability and sturdiness.
- Brushed Nickel Finish: Provides a lightly brushed warm-grey metallic look that resists corrosion, tarnishing, and flaking.
- WaterSense Certified: Meets EPA WaterSense criteria, conserving water without sacrificing performance with a maximum flow rate of 1.2 gallons per minute.
- Easy Installation: Designed for 3-hole widespread configurations (8″–16″ centers) for simplified setup.
- ADA Compliant: Complies with Americans with Disabilities Act (ADA) specifications for accessibility.
- Two-Handle Lever Design: Offers precise control over water temperature and flow.
Components Included
The following components are included with your Moen Genta LX Faucet trim kit:
- Bathroom Faucet trim kit
- Drain assembly
- Instruction Manual (this document)
Note: The Moen 9000 valve is required for complete installation and is sold separately.
Figure 2: Illustration of faucet components, highlighting the separately sold valve.
Setup and Installation
For detailed step-by-step installation instructions, please refer to the official Installation Manual PDF provided by Moen. A digital copy can be accessed via this link: Moen Genta LX Installation Manual (PDF).
This faucet is designed for a 3-hole widespread sink configuration. Ensure your sink has the appropriate drilling before proceeding with installation.
Figure 3: This faucet is compatible with a three-hole sink configuration.
The faucet features a deck-mounted installation type. The maximum deck thickness supported is 1.25 inches. Supply lines are not included and must be purchased separately. The connection size is 1/2 inch.
Figure 4: Key dimensions and installation details for the Moen Genta LX Faucet.
Operating Instructions
Your Moen Genta LX faucet features two lever handles for controlling water flow and temperature. The left handle typically controls hot water, and the right handle controls cold water. By adjusting both handles, you can achieve your desired water temperature and flow rate.
The faucet is WaterSense certified, ensuring efficient water usage without compromising performance. The maximum flow rate is 1.2 gallons per minute (GPM).
Figure 5: The Moen Genta LX faucet in operation, demonstrating water flow.
Figure 6: Moen Genta LX is certified to meet U.S. Water Safety Standards and WaterSense criteria.
Maintenance and Care
To maintain the beautiful finish and optimal performance of your Moen Genta LX faucet, follow these care guidelines:
- Cleaning: Clean regularly with a soft, damp cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- LifeShine® Finish: The Brushed Nickel finish is designed to resist corrosion, tarnishing, and flaking, ensuring long-lasting beauty.
- Water Spots: To prevent water spots, wipe the faucet dry after each use.
Troubleshooting
If you experience issues with your Moen Genta LX faucet, consider the following common troubleshooting steps:
- Low Water Flow: Check if the aerator is clogged. Unscrew the aerator from the spout and clean any debris. Ensure water supply valves are fully open.
- Leaking: A persistent drip or leak may indicate an issue with the valve cartridge. Refer to the installation manual for instructions on replacing the cartridge (Moen 9000 valve).
- Temperature Issues: If water temperature is inconsistent or not as expected, verify that both hot and cold water supply lines are properly connected and fully open.
For more complex issues or if troubleshooting steps do not resolve the problem, please contact Moen Customer Support or consult a qualified plumber.
Specifications
| Specification | Detail |
|---|---|
| Brand | Moen |
| Model Name | Genta LX |
| Model Number | T6708BN |
| Finish Type | Brushed Nickel |
| Material | Metal |
| Number of Handles | 2 |
| Hole Count | 3 |
| Installation Type | Deck Mounted |
| Maximum Flow Rate | 1.2 Gallons Per Minute |
| Spout Height | 4.5 Inches |
| Spout Reach | 5.04 Inches |
| Item Weight | 4.8 Pounds |
| Special Feature | WATERSENSE CERTIFIED |
Warranty and Support
Your Moen Genta LX faucet is backed by Moen's Limited Lifetime Warranty, providing peace of mind regarding the quality and durability of your product. For specific warranty details, claims, or additional support, please visit the official Moen website or contact their customer service.
You can find more information and support on the official Moen store page: Visit the Moen Store.
