LIGE LG9903 Men's Analog Quartz Wrist Watch User Manual

Introduction

Thank you for choosing the LIGE LG9903 Men's Analog Quartz Wrist Watch. This manual provides detailed instructions for setting up, operating, and maintaining your watch to ensure optimal performance and longevity. Please read this manual carefully before using your watch.

Product Overview

The LIGE LG9903 is a stylish and functional men's wrist watch featuring a minimalist design, a durable stainless steel mesh strap, and precise Japanese quartz movement. It is designed for everyday wear and offers water resistance for common activities.

Image: LIGE LG9903 Men's Analog Quartz Wrist Watch. This image shows the watch face, stainless steel mesh strap, and crown.

Setup

1. Adjusting the Stainless Steel Mesh Strap

The stainless steel mesh strap is designed for comfort and adjustability. You can adjust the strap length to fit your wrist using a small tool (like a flat-head screwdriver) or by visiting a professional jeweler.

1. Locate the clasp on the mesh strap.
2. Use a small tool to lift the locking plate on the clasp.
3. Slide the clasp along the mesh strap to the desired length.
4. Press the locking plate back down firmly to secure the clasp in place. Ensure it clicks securely.

2. Setting the Time

1. Pull the crown (the small knob on the side of the watch) gently outwards to the first position.
2. Rotate the crown clockwise or counter-clockwise to set the hour and minute hands to the correct time.
3. Once the time is set, push the crown back in firmly to its original position. This will start the watch movement.

Operating Your Watch

Basic Timekeeping

Your LIGE LG9903 watch uses a precise Japanese quartz movement for accurate timekeeping. Once the time is set, the watch will continuously display the current time.

Water Resistance

This watch is rated as 3ATM water resistant. This means it is suitable for daily use, such as hand washing, rain, and accidental splashes. It is not suitable for showering, bathing, swimming, diving, or any prolonged submersion in water.

• Do not operate the crown while the watch is wet or submerged in water.
• Avoid exposure to hot water or steam, as this can compromise the water resistance seals.

Maintenance

Cleaning Your Watch

To maintain the appearance of your watch, wipe it regularly with a soft, dry cloth. For the stainless steel mesh strap, a slightly damp cloth can be used, followed by immediate drying.

Battery Replacement

The watch is powered by a quartz movement which requires a battery. When the watch stops or the second hand begins to skip, the battery may need replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure the water resistance seal is properly maintained.

Battery type: 1 LR44 battery (as per specifications).

Troubleshooting

• Watch not running: Ensure the crown is pushed in completely. If it still doesn't run, the battery may need replacement.
• Time is inaccurate: Check if the crown is fully pushed in. If the issue persists, the battery may be low, or the movement may require servicing.
• Condensation inside the watch: This indicates a breach in the water resistance. Avoid further contact with water and seek professional service immediately.

For any issues not covered here, please contact LIGE customer support.

Specifications

Warranty and Support

LIGE offers a 90-day free return/exchange policy for this product. If you have any questions, problems, or require support, please feel free to contact the seller or LIGE customer service directly. Please retain your proof of purchase for warranty claims.

For further assistance, please visit the official LIGE website or contact your retailer.