Moen T2473EPBL

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Moen Genta LX Shower Trim Kit User Manual

Model: T2473EPBL

Brand: Moen

Product Overview

The Moen Genta LX Shower Trim Kit offers a contemporary design and practical functionality for your bathroom. Featuring a sleek matte black finish, this kit is designed to complement modern decor while providing a reliable and consistent shower experience. It includes a three-function showerhead with customizable spray settings and an extension arm for easy wall mounting.

Please note that the Moen Posi-Temp® Valve 2510 is required for installation and is sold separately. This pressure-balancing valve is crucial for maintaining steady water temperature and pressure, automatically adjusting to changes in the water supply.

Moen Genta LX Shower Trim Kit in Matte Black

Image: Complete Moen Genta LX Shower Trim Kit, showcasing the matte black showerhead, control handle, and tub spout.

Setup and Installation

Installation of the Moen Genta LX Shower Trim Kit requires careful attention to detail. It is highly recommended to consult the official Installation Manual for comprehensive step-by-step instructions and safety guidelines.

Key Installation Considerations:

  • Ensure you have the required Moen Posi-Temp® Valve 2510 (sold separately) installed in your wall plumbing. This trim kit is designed to work specifically with this valve system.
  • A Moen Hex/Allen wrench/key may be necessary for securing the handle. This tool is sometimes included with Moen handle kits or repair kits.
  • When installing the tub spout, ensure the O-ring is properly seated to prevent leaks. Apply Teflon tape to threaded connections for a secure seal.
  • Follow all local plumbing codes and regulations. If you are unsure about any step, it is advisable to seek assistance from a qualified plumber.

For detailed instructions, please refer to the Installation Manual (PDF).

Operating Instructions

Water Flow and Temperature Control:

The Genta LX features a single lever handle for controlling both water flow and temperature. The handle operates with a simple side-to-side motion. Red and blue markings on the escutcheon plate indicate hot and cold water directions, respectively.

  • To turn on the water, rotate the lever handle.
  • Rotate the handle towards the blue marking for colder water.
  • Rotate the handle towards the red marking for warmer water.
  • The Posi-Temp® valve automatically balances water pressure to maintain a consistent temperature, even if other water sources in the home are used.

Showerhead Settings:

The three-function showerhead allows you to customize your spray experience. Adjustments are typically made by rotating the outer ring or a central dial on the showerhead face. Refer to the showerhead's specific markings for available spray patterns (e.g., full spray, massage, combination).

To divert water from the tub spout to the showerhead, pull up the diverter knob located on the tub spout. Push it down to return water flow to the tub spout.

Maintenance

To ensure the longevity and appearance of your Moen Genta LX Shower Trim Kit, regular cleaning and maintenance are recommended.

  • Cleaning: Clean the matte black finish with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish. The matte finish is designed to resist water spots more effectively than traditional chrome.
  • Showerhead Nozzles: Periodically clean the rubber nozzles on the showerhead to remove mineral buildup. This can often be done by gently rubbing them with your finger or a soft brush.
  • General Care: Wipe down the trim kit after each use to prevent water spots and soap scum buildup.

Troubleshooting

If you encounter issues with your Moen Genta LX Shower Trim Kit, consider the following common solutions:

ProblemPossible CauseSolution
Low Water Pressure from ShowerheadClogged showerhead nozzles; flow restrictor in showerhead.Clean showerhead nozzles. Consult manual for flow restrictor removal (if applicable and permitted by local codes).
Water Leaking from Tub Spout or HandleImproperly seated O-ring in tub spout; faulty valve cartridge.Ensure tub spout O-ring is correctly installed and tightened. If valve cartridge is suspected, contact Moen support or a qualified plumber.
Handle is Loose or WobblySet screw not tightened sufficiently.Tighten the set screw on the handle using the appropriate Moen Hex/Allen wrench.
Inconsistent Water TemperatureIssue with Posi-Temp® valve or water supply.Verify proper installation of the Posi-Temp® valve. Check home's hot water supply. If issues persist, contact Moen support.

For further assistance, please contact Moen Customer Support.

Product Specifications

FeatureDetail
BrandMoen
Model NumberT2473EPBL
ColorMatte Black
MaterialMetal
Finish TypeMatte
Number of Handles1
Mounting TypeWall Mount
Included ComponentsValve trim, showerhead, tub spout
Maximum Pressure80 Pound per Square Inch
Spout Reach7 Inches
Showerhead Size4.5 inches
Item Weight3.14 Pounds
Product Dimensions7.87 x 7.72 x 4.57 inches
ADA CompliantYes
WaterSense CertifiedYes

Warranty Information

The Moen Genta LX Shower Trim Kit is backed by a Limited Lifetime Warranty. This warranty covers defects in material and manufacturing workmanship for the original consumer purchaser. For full details regarding warranty coverage, terms, and conditions, please refer to the official Moen warranty documentation or contact Moen Customer Support.

Customer Support

For technical assistance, troubleshooting, warranty claims, or to order replacement parts, please contact Moen Customer Support through their official website or by phone. Have your product model number (T2473EPBL) and purchase information ready when contacting support.

Moen Official Website: www.moen.com

Installation Manual: Download PDF

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.