1. Product Overview
The Savio Engineering PP1050 is a complete pond package designed for creating water features up to 1,050 gallons. This kit provides essential components to establish a functional and aesthetically pleasing pond environment.
Image: The Savio PP1050 Complete Pond Package, showcasing the various components included in the kit.
Package Contents:
- Water Master Solids 2050 GPH Pump
- 15' x 15' EPDM Liner and Underlayment
- Savio F070 16" Waterfall Weir
- Compact Savio Skimmer with 8.5" Faceplate
- Tubing
- Lights
- All necessary plumbing components
Image: An example of a fully installed pond with a waterfall, aquatic plants, and rocks, demonstrating the potential outcome of the pond package.
2. Setup Instructions
Careful planning and installation are crucial for the longevity and performance of your pond. Follow these steps for proper setup.
2.1 Site Selection and Excavation
- Choose a level area away from large trees to minimize leaf debris and root interference.
- Mark the desired pond shape and waterfall location.
- Excavate the pond area, creating shelves for aquatic plants and a deeper section for the pump and fish (if applicable). Ensure the edges are level.
2.2 Underlayment and Liner Installation
Image: Rolls of black EPDM pond liner and a separate roll of geotextile underlayment, essential for pond construction.
- Remove any sharp objects from the excavated area.
- Lay the geotextile underlayment evenly over the entire excavated area, overlapping seams by at least 6 inches. This protects the liner from punctures.
- Carefully unfold and position the EPDM pond liner over the underlayment, ensuring it drapes into all contours of the pond. Minimize wrinkles as much as possible.
- Secure the edges of the liner temporarily with rocks or soil.
2.3 Skimmer and Waterfall Weir Installation
Image: A visual comparison showing the internal components and structure of a standard skimmer filter versus a compact skimmer filter.
- Install the Compact Savio Skimmer at the pond's edge, ensuring the faceplate is at the desired water level. Connect the pond liner to the skimmer faceplate according to the skimmer's specific instructions, creating a watertight seal.
- Position the Savio F070 16" Waterfall Weir at the highest point of your waterfall design. Connect the pond liner to the weir to create a spillway.
2.4 Pump and Plumbing Connection
Image: The Water Master Solids 2050 GPH Pump, a submersible pump designed for pond applications.
Image: Flexible corrugated tubing used for connecting pond components like pumps and filters.
- Place the Water Master Solids 2050 GPH Pump inside the skimmer or at the deepest part of the pond, ensuring it is stable and accessible for maintenance.
- Connect the provided tubing from the pump's outlet to the Savio F070 Waterfall Weir. Use appropriate clamps to secure all connections.
- Run the electrical cord from the pump to a GFCI-protected outdoor outlet. Ensure all electrical connections are waterproof and meet local codes.
2.5 Filling and Finishing
- Begin filling the pond with water. As the pond fills, adjust the liner to remove any remaining large wrinkles.
- Once the pond is filled to the desired level, trim excess liner, leaving a sufficient overlap to secure with rocks, gravel, or soil around the perimeter.
- Install the included lights according to their specific instructions, ensuring they are safely submerged or positioned.
3. Operating Instructions
Once your pond is set up, operating it involves managing water flow, filtration, and electrical components.
3.1 Initial Startup
- Ensure all plumbing connections are secure and the pump is fully submerged.
- Plug in the pump to the GFCI-protected outlet. Water should begin flowing from the waterfall weir.
- Check for any leaks around the skimmer, waterfall weir, and plumbing connections. Address any leaks immediately.
- Plug in the pond lights.
3.2 Water Flow Adjustment
The Water Master Solids Pump provides a consistent flow. Adjustments to waterfall intensity can be made by modifying the weir's setup or, if applicable, using a flow control valve (not included in this package).
3.3 Skimmer Function
The Compact Savio Skimmer will draw surface debris (leaves, pollen) into its basket, preventing it from sinking and decomposing in the pond. Regularly check and empty the skimmer basket.
4. Maintenance
Regular maintenance ensures a healthy pond environment and extends the life of your equipment.
4.1 Daily/Weekly Maintenance
- Skimmer Basket: Empty the skimmer basket of leaves and debris as needed, typically daily or every few days depending on debris load.
- Water Level: Check the pond's water level and top off with dechlorinated water if necessary, especially during hot or windy weather.
4.2 Monthly/Seasonal Maintenance
Image: Various pond water treatment products, including beneficial bacteria, and a landscape light, used for pond health and aesthetics.
- Pump Cleaning: Disconnect power and remove the pump. Clean any debris from the pump intake and impeller.
- Skimmer Filter Pads: Rinse or replace the filter pads within the skimmer as they become clogged.
- Waterfall Weir: Inspect the waterfall weir for algae buildup and clean as needed to maintain optimal flow.
- Water Treatments: Apply beneficial bacteria or other pond treatments as recommended by the manufacturer to maintain water quality.
- Pond Lights: Clean light fixtures and check for proper operation. Replace bulbs if necessary.
4.3 Winterization (Cold Climates)
- Remove the pump and store it in a bucket of water in a frost-free location.
- Drain or partially drain the skimmer and waterfall weir to prevent freezing damage.
- Remove and store pond lights.
5. Troubleshooting
Common issues and their potential solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump not running | No power, clogged intake, damaged impeller | Check GFCI outlet, clean pump intake/impeller, inspect power cord. |
| Low water flow from waterfall | Clogged pump, kinked tubing, low water level | Clean pump, check tubing for obstructions, add water to pond. |
| Pond water is cloudy/green | Excess nutrients, insufficient filtration, too much sunlight | Clean skimmer filter pads, add beneficial bacteria, ensure proper water circulation, consider partial water changes. |
| Pond is leaking | Liner puncture, loose plumbing connection, edge settling | Inspect liner for damage (repair with patch kit), tighten plumbing, check pond edges for low spots. |
6. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 29 x 25 x 24 inches |
| Item Weight | 180 pounds |
| Manufacturer | Savio |
| Item Model Number | PP1050 |
| Pond Capacity (Approx.) | 1,050 Gallons (up to 11' x 11' pond with 15' x 15' liner) |
| Pump Flow Rate | 2050 GPH (Gallons Per Hour) |
| Waterfall Weir Size | 16 inches (Savio F070) |
| Skimmer Faceplate Size | 8.5 inches (Compact Savio Skimmer) |
7. Warranty and Support
For warranty information and technical support, please refer to the documentation included with your product or contact Savio customer service directly. Keep your proof of purchase for any warranty claims.
Manufacturer: Savio
Website: Visit the Savio Store on Amazon
