Product Overview
This manual provides essential information for the Stanley OEM H2000052 Replacement Wheel. This is a genuine OEM DeWalt replacement part, designed for specific power tool models.
Image: A black replacement wheel with a central hub and spokes, featuring a textured tread pattern on the outer rim.
The H2000052 wheel is supplied as a new, bulk-packed item. It is crucial to consult your original equipment's owner's manual for proper part number identification and installation procedures to ensure correct fit and function.
Compatibility
The Stanley OEM H2000052 Replacement Wheel is compatible with the following models:
- DWST20880
- 020800R
Always verify compatibility with your specific tool model before attempting installation.
Installation / Setup
This section outlines the general steps for replacing a wheel. Specific instructions may vary depending on your power tool model. Always refer to your tool's original owner's manual for detailed, model-specific installation procedures.
- Safety First: Ensure the power tool is disconnected from its power source (unplugged or battery removed) before beginning any maintenance or installation.
- Access the Wheel Assembly: Depending on your tool, you may need to remove covers or other components to access the wheel.
- Remove the Old Wheel: Identify the fastening mechanism (e.g., nut, bolt, clip) securing the old wheel. Use appropriate tools to carefully remove it. Note the orientation of any washers or spacers.
- Install the New Wheel: Place the new Stanley H2000052 replacement wheel onto the axle. Ensure it is correctly aligned and all necessary washers or spacers are in their original positions.
- Secure the New Wheel: Re-attach the fastening mechanism, tightening it securely but without over-tightening, which could damage the wheel or axle.
- Reassemble: Re-attach any covers or components that were removed to access the wheel.
- Functionality Check: Once installed, manually rotate the wheel to ensure it spins freely and without obstruction.
Note: If you are unsure about any step, it is recommended to seek assistance from a qualified technician or refer to official service manuals for your specific power tool.
Operating
As a replacement part, the Stanley H2000052 wheel does not have operational controls. Its function is integral to the mobility or specific operation of the power tool it is installed on. Ensure the wheel is properly installed and spins freely before operating the power tool.
Maintenance
The Stanley H2000052 replacement wheel is designed for durability and typically requires minimal maintenance. However, regular inspection can prolong its lifespan and ensure safe operation of your power tool.
- Regular Inspection: Periodically inspect the wheel for signs of wear, cracks, or damage. Check for any debris or foreign objects lodged in the tread or around the axle.
- Cleaning: If necessary, clean the wheel with a damp cloth to remove dirt or grime. Avoid using harsh chemicals that could degrade the material.
- Axle Check: Ensure the wheel remains securely fastened to the axle. If any looseness is detected, re-tighten the fastening mechanism according to your tool's manual.
Troubleshooting
If you encounter issues after installing the replacement wheel, consider the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| Wheel does not spin freely. |
|
|
| Wheel is loose or wobbly. |
|
|
| Wheel does not fit. |
|
|
Specifications
- Model Number: H2000052
- Brand: STANLEY
- Manufacturer: Stanley
- Part Type: OEM Replacement Wheel
- Compatibility: DWST20880, 020800R
- Item Weight: Approximately 8 ounces (0.5 Pounds)
- Product Dimensions: Approximately 7.05 x 7.1 x 1.75 inches
Warranty Information
Specific warranty details for replacement parts like the H2000052 wheel are typically covered under the warranty policy of the original power tool manufacturer (DeWalt in this case, as it's a genuine OEM DeWalt part). Please refer to the warranty documentation provided with your original power tool or contact DeWalt customer support for precise warranty terms and conditions applicable to replacement parts.
Support
For further assistance regarding the Stanley OEM H2000052 Replacement Wheel, or for specific installation guidance related to your power tool, please:
- Consult the owner's manual of your specific power tool (e.g., DWST20880, 020800R).
- Visit the official STANLEY website for product information and support resources.
- Contact DeWalt customer service, as this is a genuine OEM DeWalt replacement part.
