Introduction
Thank you for choosing the LUTEC Maya LED Outdoor Wall Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Designed for outdoor use, this light features a robust aluminum and stainless steel construction, an integrated motion sensor, and an elegant up-and-down light effect, providing efficient and warm illumination for your garden or outdoor areas.
The LUTEC Maya LED Outdoor Wall Light, showcasing its sleek design and stainless steel finish.
Safety Information
Please read these safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
- Ensure the power supply is disconnected at the main circuit breaker before installation, maintenance, or cleaning.
- Do not modify the light fixture in any way.
- This product is designed for outdoor use and has an IP44 rating, protecting against splashing water. Do not immerse in water.
- Do not look directly into the LED light source when illuminated.
- Keep packaging materials out of reach of children.
Package Contents
Verify that all components are present before beginning installation:
- 1 x LUTEC Maya LED Outdoor Wall Light (Model: 5198401001)
- Mounting hardware (screws, wall plugs)
- User Manual (this document)
Setup and Installation
Follow these steps for proper installation of your outdoor wall light:
- Preparation: Turn off the main power supply at the circuit breaker before starting any electrical work. Ensure the mounting surface is stable and can support the weight of the fixture.
- Marking: Hold the light fixture against the desired mounting location and mark the drilling points for the mounting screws.
- Drilling: Drill holes at the marked points using an appropriate drill bit for your wall type. Insert wall plugs if necessary.
- Wiring: Connect the electrical wires from your power supply to the terminals on the light fixture. Ensure correct polarity (Live, Neutral, Earth). Refer to local wiring regulations.
- Mounting: Secure the light fixture to the wall using the provided screws. Ensure a tight and secure fit.
- Sealing: For outdoor installations, ensure all cable entries and mounting points are properly sealed to maintain the IP44 rating and prevent water ingress.
- Power On: Once installation is complete and secure, restore power at the main circuit breaker.
The Maya light fixture installed on an exterior wall, demonstrating its up-and-down illumination.
Operating Instructions
Your LUTEC Maya LED Outdoor Wall Light is equipped with an integrated motion sensor for automatic operation.
Motion Sensor Functionality:
- Detection Angle: The sensor has a 180-degree detection angle.
- Detection Range: Adjustable from 0 to 10 meters (at a mounting height of 2.5 meters).
- Timer: The light can be set to remain on for 10 seconds up to 10 minutes after motion is detected.
- Light Sensitivity (LUX): The sensor can be adjusted to activate at different ambient light levels, typically 10 LUX for dusk/night operation.
Adjustments for range, timer, and light sensitivity are typically made via small dials or switches located on the sensor unit, usually accessible after opening the fixture cover. Refer to the specific markings on your device for precise adjustment points.
Diagram illustrating the motion sensor's detection capabilities.
Maintenance
To ensure the longevity and optimal performance of your LUTEC Maya LED Outdoor Wall Light, follow these maintenance guidelines:
- Cleaning: Clean the fixture regularly with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Inspection: Periodically inspect the fixture for any signs of damage, loose connections, or wear. Ensure the seals are intact to maintain the IP44 weather resistance.
- LEDs: The integrated LED light source is designed for long life and is not user-replaceable. Do not attempt to open the sealed LED compartment.
The light fixture demonstrating its IP44 protection against water splashes, ensuring durability in outdoor conditions.
Troubleshooting
If you encounter issues with your light fixture, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; faulty wiring; sensor settings. | Check circuit breaker. Verify wiring connections. Adjust sensor LUX setting to a lower value or test in darkness. |
| Light stays on constantly. | Sensor constantly triggered; sensor faulty; timer setting too long. | Check for constant motion in sensor's field of view. Adjust sensor range. Reduce timer setting. |
| Light flickers or dims. | Unstable power supply; loose connection. | Consult a qualified electrician to check power supply and connections. |
| Motion sensor not detecting. | Sensor obstructed; incorrect sensitivity setting. | Clear any obstructions. Increase sensor sensitivity or range. |
If the problem persists after attempting these solutions, please contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | LUTEC |
| Model Number | 5198401001 |
| Dimensions (H x W x D) | 17.5 x 15 x 6.8 cm |
| Weight | 600 g |
| Material | Aluminum, Metal |
| Color | Stainless Steel / Black |
| Voltage | 230 Volt |
| Power Consumption | 17 Watt |
| Luminous Flux | 1000 Lumen |
| Color Temperature | 3000 Kelvin (Warm White) |
| Light Direction | Up & Down Effect |
| Protection Class | IP44 (Splash-proof) |
| Motion Sensor Detection Angle | 180 degrees |
| Motion Sensor Detection Range | 0 - 10 meters |
| Motion Sensor Timer | 10 seconds - 10 minutes |
| Motion Sensor Light Sensitivity | 10 LUX |
| Application Area | Outdoor, Garden |
Visual representation of the light's dimensions and key features.
Warranty and Support
Your LUTEC Maya LED Outdoor Wall Light comes with a 5-year warranty from the date of purchase, covering defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
For technical support, warranty claims, or any questions not covered in this manual, please contact LUTEC customer service through their official website or the retailer where you purchased the product. You can find more information and contact details on the LUTEC Brand Store.
