JVD EXP'AIR+ Automatic Hand Dryer User Manual

1. Introduction

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your JVD EXP'AIR+ Automatic Hand Dryer, Model 3324120011614. This hand dryer is designed for intensive use environments and features an anti-vandal ergonomic aluminum cover, making it suitable for various public and commercial settings, including those accessible to people with reduced mobility.

Please read this manual thoroughly before installation and use, and retain it for future reference.

2. Safety Instructions

WARNING: Failure to follow these safety instructions may result in electric shock, fire, or serious injury.

• Ensure the power supply is disconnected before any installation, maintenance, or cleaning procedures.
• Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
• Do not install the hand dryer in areas where it may be exposed to direct water spray or excessive humidity.
• Do not operate the hand dryer if it is damaged or malfunctioning. Contact qualified service personnel.
• Keep hands and foreign objects away from the air outlet during operation.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

3. Setup and Installation

Important: Installation must be carried out by a qualified professional.

3.1 Unpacking

• Carefully remove the hand dryer from its packaging.
• Inspect the unit for any signs of damage during transit. Do not install if damaged.
• Ensure all components listed in the packing list are present.

3.2 Mounting Location

• Choose a suitable wall location, ensuring adequate space for hand drying and accessibility.
• Avoid mounting directly above sinks or in areas prone to excessive splashing.
• Ensure the wall material can support the weight of the hand dryer.

3.3 Installation Steps

1. Disconnect Power: Ensure the main power supply to the installation area is switched off at the circuit breaker.
2. Mark Drilling Points: Use the provided mounting template (if applicable) or measure and mark the drilling points on the wall. Refer to the product dimensions for proper placement.
3. Drill Holes: Drill holes at the marked points and insert appropriate wall anchors suitable for your wall type.
4. Secure Mounting Plate: Attach the mounting plate (if separate) to the wall using screws.
5. Electrical Connection: Connect the electrical wiring to the terminal block inside the hand dryer. Ensure correct polarity and secure connections. All wiring must comply with local electrical codes.
6. Mount Hand Dryer: Carefully align the hand dryer with the mounting plate or wall anchors and secure it firmly with screws.
7. Test Operation: Restore power and test the hand dryer's operation.

Figure 1: Front view of the JVD EXP'AIR+ Automatic Hand Dryer. This image shows the sleek design and the air outlet opening.

4. Operating Instructions

The JVD EXP'AIR+ hand dryer operates automatically using an infrared sensor.

1. Activate: Place your hands under the air outlet. The sensor will detect your hands and automatically start the airflow.
2. Dry Hands: Move your hands slowly back and forth under the airflow to ensure thorough drying.
3. Deactivate: Remove your hands from the sensor's detection area. The hand dryer will automatically stop after a few seconds.

For optimal drying, ensure hands are shaken free of excess water before placing them under the dryer.

5. Maintenance and Cleaning

Regular maintenance ensures optimal performance and extends the lifespan of your hand dryer.

5.1 Cleaning the Exterior

• Disconnect Power: Always switch off the power supply to the unit before cleaning.
• Wipe Surface: Use a soft, damp cloth with a mild, non-abrasive cleaner to wipe the exterior surface.
• Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or strong chemicals, as these can damage the finish.
• Dry Thoroughly: Dry the surface with a clean, soft cloth.

5.2 Filter Cleaning (if applicable)

Some models may include an air filter. Refer to the specific product documentation for instructions on accessing and cleaning or replacing the filter. Regular filter cleaning improves air quality and dryer efficiency.

5.3 Internal Inspection

Periodically, a qualified technician should inspect the internal components for dust accumulation, loose connections, or wear. This should only be done with the power disconnected.

6. Troubleshooting

Before contacting customer support, please refer to the following table for common issues and their solutions.

If the problem persists after attempting these solutions, please contact JVD customer support or a qualified service technician.

7. Specifications

Figure 2: Technical drawing illustrating the approximate dimensions of the JVD EXP'AIR+ Hand Dryer. The height is approximately 430mm, width 343mm, and depth 237mm.

8. Warranty and Support

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. JVD products are designed for durability and performance.

For technical support, spare parts, or service inquiries, please contact JVD customer service or your local distributor. Contact details can typically be found on the manufacturer's official website or in your purchase documentation.