TAVR Universal Floor TV Stand Base Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your TAVR Universal Floor TV Stand Base. Designed for 32-75 inch televisions, this stand offers a stable and versatile solution for your home entertainment setup. Please read this manual thoroughly before beginning assembly to ensure safe and correct installation.

Figure 1: TAVR Universal Floor TV Stand Base (Model TF2003)

Safety Information

Adherence to these safety guidelines is crucial for preventing injury and damage to the product. Always ensure the TV stand is assembled on a flat, stable surface and that all components are securely fastened.

• Weight Capacity: Do not exceed the maximum weight capacity of 110 lbs (50 kg). This stand is designed for TVs between 32 and 75 inches.
• Stability: Ensure the stand is placed on a level and stable floor. Avoid placing it on uneven surfaces or near edges where it could be easily tipped.
• Secure Mounting: Always use the provided safety bracket lock to prevent the TV from falling or slipping. Verify that the VESA mounting screws are correctly sized and tightened for your television.
• Children and Pets: Keep children and pets away from the TV stand during assembly. Do not allow them to climb on or play with the stand or mounted TV.
• Cable Management: Utilize the integrated cable management system to prevent tripping hazards and maintain a tidy appearance.
• Tempered Glass Care: The base is made of tempered glass. Handle with care to avoid chipping or breaking. Do not place excessively heavy or sharp objects on the glass base.

Figure 2: Stability and Safety Features

Package Contents

Before assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, contact customer support.

Refer to the detailed assembly diagram provided in the packaging for specific part identification.

Assembly Instructions

Follow these steps carefully to assemble your TV stand. It is recommended to have a second person assist with lifting and positioning the TV.

Step 1: Attach Non-slip Feet to Base

Carefully place the tempered glass base (Part A) upside down on a soft, clean surface. Attach the non-slip feet (Part E) to the designated corners of the base using the appropriate screws from the hardware kit.

Figure 3: Attaching Non-Slip Pads

Step 2: Assemble Main Support Column to Base

Attach the main support column (Part B) to the tempered glass base (Part A) using the provided bolts and washers. Ensure the column is oriented correctly, with the VESA mounting holes facing the desired direction for your TV.

Figure 4: Base and Column Assembly

Step 3: Attach TV Mounting Bracket to Support Column

Secure the TV mounting bracket (Part C) to the main support column (Part B) using the designated screws. This bracket allows for height adjustment. Ensure it is firmly attached.

Figure 5: Mounting Bracket Attachment and Features Overview

Step 4: Determine VESA Pattern and Select Screws for TV

Identify the VESA mounting pattern on the back of your television. This is the distance between the four mounting holes (horizontal x vertical). Select the appropriate screws (M4, M6, or M8) and spacers from the hardware kit that fit your TV's VESA pattern. Refer to your TV's manual for specific screw requirements.

Figure 6: VESA Compatibility and Screw Selection

Step 5: Attach TV Brackets to Television

Attach the vertical TV brackets (Part C, or parts that slide into C) to the back of your television using the selected VESA screws and spacers. Ensure they are securely tightened but do not overtighten.

Step 6: Mount Television onto Stand

With assistance, carefully lift the television and hook the attached TV brackets onto the TV mounting bracket on the stand. Ensure the TV is centered and level. Engage the safety bracket locks to secure the TV in place.

Figure 7: Engaging Steel Security Locks

Step 7: Cable Management

Use the provided cable management clips (Part F) to route and secure all cables along the main support column. This helps maintain a neat appearance and prevents accidental disconnections or tripping hazards.

Figure 8: Cable Management System

Step 8: Optional Apple TV/Roku Ultra Mount Installation

If desired, install the Apple TV/Roku Ultra mount (Part H) behind your TV or on the main support pole as per the separate instructions included with that accessory. This helps keep streaming devices organized.

Figure 9: Optional Device Mount

Operating Instructions

Height Adjustment

The TAVR TV stand offers multiple levels of height adjustment to achieve optimal viewing. The overall height from the ground to the top of the bracket can be adjusted from 49.6 inches to 55.5 inches. This adjustment can be made by repositioning the TV mounting bracket on the main support column and by utilizing the three adjustable height options on the TV hooks themselves. Ensure the TV is removed or securely supported before making height adjustments to the main bracket.

Figure 10: Height Adjustment Range

Swivel Function

The TV mounting bracket allows for a 30-degree swivel to the left or right. This feature enables you to adjust the viewing angle without moving the entire stand, providing flexibility for different seating positions within a room. Gently rotate the television to the desired angle.

Figure 11: Swivel Functionality

Maintenance

Regular maintenance ensures the longevity and appearance of your TV stand.

• Cleaning: Use a soft, damp cloth to wipe down the metal and glass surfaces. Avoid abrasive cleaners or harsh chemicals that could damage the finish or glass. For glass, a glass cleaner can be used.
• Hardware Check: Periodically check all screws and bolts to ensure they remain tight. Loose connections can affect stability.
• Glass Inspection: Inspect the tempered glass base for any chips or cracks. If damage is observed, discontinue use and contact customer support.

Troubleshooting

If you encounter issues with your TV stand, refer to the following common problems and solutions:

If the problem persists, please contact TAVR Furniture customer support.

Specifications

Warranty and Support

TAVR Furniture stands behind the quality of its products. For specific warranty information, please refer to the warranty card included with your purchase or visit the official TAVR Furniture website. For technical assistance, missing parts, or any other inquiries, please contact TAVR Furniture customer support. Contact details are typically found on the product packaging or the brand's official website.

Manufacturer: TAVR Furniture

UPC: 786784035277