1. Introduction
Thank you for choosing the JandCase BR30 LED Color Changing Light Bulb. This product offers versatile lighting options with 17 dimmable color choices, warm and cool white light, and various dynamic modes, all controllable via a dedicated remote. Please read this manual carefully to ensure proper installation and operation.
2. Safety Information
- Always turn off the power supply before installing, removing, or cleaning the light bulb.
- This bulb is designed for use with an E26 base. Ensure your fixture is compatible.
- Do not use this bulb with external dimmer switches. The bulb has its own integrated dimming function controlled by the remote.
- Avoid exposing the bulb to direct water or high humidity unless the fixture is specifically rated for wet locations.
- Do not disassemble the bulb. There are no user-serviceable parts inside.
- Keep the remote control and its batteries out of reach of children.
3. Package Contents
Your package should contain the following items:
- JandCase BR30 LED Color Changing Light Bulbs (quantity as purchased)
- Remote Control (batteries not included, requires 2x AAA batteries)
Image: Contents of the JandCase BR30 LED Color Changing Light Bulb package, showing two bulbs and the remote control.
4. Setup
4.1. Bulb Installation
- Ensure the power to the light fixture is turned off at the switch or circuit breaker.
- Carefully screw the JandCase BR30 LED bulb into a standard E26 base socket until snug. Do not overtighten.
- Restore power to the light fixture.
4.2. Remote Control Setup
- Locate the battery compartment on the back of the remote control.
- Insert two AAA batteries, ensuring correct polarity (+/-).
- Close the battery compartment. The remote is now ready for use.
Image: Remote control with its battery compartment open, illustrating the insertion of AAA batteries.
5. Operating Instructions
The remote control allows for full functionality of your JandCase BR30 LED bulb. Ensure the remote is pointed towards the bulb within a range of up to 16.4 feet (5 meters) for optimal performance.
5.1. Basic Functions
- Power On/Off: Press the red power button to turn the bulb on or off.
- Brightness Adjustment: Use the brightness up and brightness down buttons to cycle through 5 grades of brightness.
- White Light Selection: Press WARM for 2700K warm white light or COOL for 6500K cool white light.
- Color Selection: Choose from 17 static colors by pressing the corresponding color buttons on the remote.
Image: The remote control, highlighting buttons for power, brightness, and color selection.
5.2. Auto Color Cycle Modes
The bulb features two dynamic color-changing modes:
- Flash Mode (F button): Enlivens the atmosphere by rapidly cycling through colors. Ideal for parties.
- Smooth Mode (S button): Provides a gradual transition between colors, suitable for a relaxed or romantic setting.
- Speed Control: While in Flash or Smooth mode, use the brightness up/down buttons to adjust the speed of color transitions.
- Pause: Press the pause button to hold the current color during a dynamic mode.
Image: An indoor setting with people, illuminated by the flashing colors of the BR30 bulbs, demonstrating the Flash mode.
5.3. Timing Function
The timing function allows you to schedule the bulb to turn off automatically:
- Press the 1H button to set the bulb to turn off after 1 hour.
- Press the 24H button to set the bulb to turn off after 24 hours.
- The timer can be set for up to 24 hours.
Image: A split image of a house exterior, showing it lit up at night with the remote control indicating the timing function for automatic turn-off.
5.4. Memory Function
The bulb features a dual memory function:
- When the bulb is turned off using the remote control (not the wall switch), it will remember the last selected color and brightness setting.
- The bulb will resume these settings the next time it is powered on via the remote.
6. Maintenance
- Cleaning: Ensure the power is off before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Remote Control: If the remote control's functionality decreases, replace the AAA batteries.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not turn on. | No power to the fixture; bulb not screwed in properly; bulb failure. | Check power switch/circuit breaker. Ensure bulb is securely screwed into the socket. Test with another working bulb if possible. |
| Remote control is not working. | Dead batteries; remote out of range; obstruction between remote and bulb. | Replace AAA batteries in the remote. Ensure remote is within 16.4 feet (5 meters) and has a clear line of sight to the bulb. |
| Bulb does not respond to color/brightness changes. | Remote issue; bulb malfunction. | Verify remote functionality (see above). Power cycle the bulb (turn off at switch for 10 seconds, then on). If problem persists, the bulb may be faulty. |
| Color or brightness is inconsistent. | Bulb malfunction; environmental factors. | Power cycle the bulb. Ensure the bulb is not exposed to extreme temperatures or moisture. If the issue continues, the bulb may be defective. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | BR30-10-02 |
| Manufacturer | JandCase |
| Item Weight | 8.4 ounces |
| Product Dimensions | 3.74 x 3.74 x 4.41 inches |
| Base Type | E26 |
| Voltage | 120 Volts |
| Wattage | 12 watts (100W Equivalent) |
| Luminous Flux | 1050 Lumen |
| Color Temperature | 2700K (Warm White) - 6500K (Cool White) + RGB |
| Material | Aviation Aluminum and Plastics |
| Special Features | Count Down Function, Dimmable, Memory Function, Night Light, Remote Control |
| Usage | Ceiling Can |
Image: Visual representation of the BR30 bulb and remote control with their respective dimensions.
9. Warranty and Support
For product support, warranty information, or to contact JandCase customer service, please visit the official JandCase store or contact your retailer.
JandCase Store: https://www.amazon.com/stores/JandCase/