1. Product Overview
The JONATHAN Y JYL7218A Reese Chandelier is a contemporary lighting fixture featuring integrated LED technology and crystal embellishments. Its design offers a minimalist aesthetic with high-end finishes, providing flicker-free illumination. The integrated LED components are designed for long-term use, eliminating the need for bulb replacement. This fixture is suitable for various indoor spaces including kitchens, hallways, bathrooms, offices, and living rooms.
Key features include:
- Integrated LED for consistent light distribution and energy efficiency.
- Adjustable wire length, allowing customization of the drop from 4 inches to 76 inches.
- Dimmable functionality for adjustable light intensity.
- ETL Listed and meets 120-volt UL standards for safety.
Image 1.1: The JONATHAN Y Reese Chandelier, showcasing its crystal and chrome design.
Video 1.1: A brief overview of the JONATHAN Y Reese Chandelier's features and design.
2. Safety Information
Please read and understand all instructions before beginning installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards that can cause injury or property damage.
- Professional Installation Recommended: Due to the nature of electrical installations, professional installation is recommended for all ceiling light fixtures.
- Electrical Safety: Ensure the power supply is turned off at the circuit breaker before installation, maintenance, or cleaning.
- Voltage: This fixture operates on 120 Volts AC.
- ETL/UL Standards: This product is ETL Listed and meets 120-volt UL standards for safety and quality.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
- Indoor Use Only: This fixture is designed for indoor use only.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer support for assistance.
- JONATHAN Y JYL7218A Reese Chandelier (Integrated LED Lighting Fixture)
- Mounting Hardware (typically includes mounting bracket, screws, wire nuts)
- Installation Instructions (this manual)
4. Setup and Installation
Assembly is required for this fixture. Professional installation is recommended. Ensure power is disconnected at the circuit breaker before starting.
4.1 Pre-Installation
- Unpack all components carefully and inspect for any damage.
- Turn off the main power supply to the junction box at the circuit breaker.
- Ensure you have all necessary tools (e.g., screwdriver, wire strippers, ladder).
4.2 Mounting the Fixture
This chandelier is designed for ceiling mount installation and can be used as a semi-flush mount. It is also compatible with sloped ceilings.
- Attach the mounting bracket to the junction box using the provided screws.
- Connect the electrical wires:
- Connect the fixture's black wire to the house's black (live) wire.
- Connect the fixture's white wire to the house's white (neutral) wire.
- Connect the fixture's ground wire to the house's ground wire (or bare copper wire).
- Secure all connections with wire nuts and electrical tape.
- Carefully tuck the wires into the junction box.
- Secure the canopy of the fixture to the mounting bracket.
4.3 Adjusting the Height
The suspension wires are fully adjustable, allowing you to customize the drop height from a minimum of 4 inches to a maximum of 76 inches from the ceiling.
- Before securing the canopy, adjust the length of the suspension wires by pressing the pin on the wire grippers located on the canopy and pulling the wire to the desired length.
- Ensure all wires are evenly adjusted to keep the fixture level.
- Once the desired height is achieved, secure the canopy.
Image 4.1: Key features diagram, including adjustable height and dimmer compatibility.
Image 4.2: Detailed dimensions of the chandelier, showing minimum and maximum drop heights.
5. Operating Instructions
Once installed, the JONATHAN Y Reese Chandelier is ready for operation.
- Power On/Off: Operate the fixture using a standard ON/OFF wall switch.
- Dimming: This fixture is dimmable. To utilize the dimming feature, ensure you have a compatible dimmer switch installed. The control method is described as "Touch" or "Ring" which typically refers to the type of dimmer switch or integrated control.
- Light Characteristics: The integrated LED produces a Warm White light with a color temperature of 4000 Kelvin and a brightness of 1486 Lumens.
6. Maintenance
Regular maintenance will help preserve the appearance and functionality of your chandelier. Always ensure the power is turned off at the circuit breaker before cleaning.
- Cleaning:
- For the metal components, wipe with a soft, dry cloth. Avoid abrasive cleaners or polishes that could damage the finish.
- For the crystal components, gently wipe with a soft, damp cloth. A mild glass cleaner can be used sparingly if needed, applied to the cloth first, not directly to the crystals.
- LED Components: The integrated LED components are designed for a lifespan of up to 15 years with normal use and do not require replacement.
7. Troubleshooting
If you experience issues with your chandelier, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not light up. |
|
|
| Light flickers or is dim. |
|
|
| Fixture is crooked. |
|
|
If these steps do not resolve the issue, contact a qualified electrician or JONATHAN Y customer support.
8. Specifications
| Attribute | Detail |
|---|---|
| Brand | JONATHAN Y |
| Model Name | Reese |
| Model Number | JYL7218A |
| Dimensions (L x W x H) | 15.75" x 15.75" x 4" |
| Adjustable Drop Height | 4" to 76" |
| Material | Crystal, Metal |
| Color / Finish | Chrome / Clear, Polished |
| Light Source Type | Integrated LED |
| Wattage | 24 watts |
| Brightness | 1486 Lumens |
| Color Temperature | 4000 Kelvin (Warm White) |
| Voltage | 120 Volts |
| Dimmable | Yes |
| Installation Type | Ceiling Mount, Flush Mount compatible |
| Indoor/Outdoor Usage | Indoor |
| Item Weight | 5.5 Pounds |
| Certifications | ETL, UL |
| Average LED Life | 50,000 Hours |
| UPC | 819727029030 |
9. Warranty and Support
9.1 Warranty Information
This product comes with a 30-day manufacturer warranty for defects only. Normal wear and tear is not warranted. Visible damages not noted upon delivery will be determined to be customer damage and will not be warranted. All products are inspected upon arrival, and worn, dirty, or stained merchandise will not be accepted for warranty claims.
9.2 Customer Support
For warranty information or any product-related inquiries, please contact the internet customer service center. Refer to your purchase documentation for specific contact details.
