UpStart Components RC-RCR503BZ-DL83

UpStart Components Replacement Universal Remote Control

Model: RC-RCR503BZ-DL83

Compatible with RCA 3-Device and Orion TV

Introduction

This manual provides instructions for the UpStart Components Replacement Universal Remote Control. Designed for ease of use, this remote offers a convenient solution for controlling multiple devices. It is compatible with various brands, including RCA 3-Device and Orion TV, using specific programming codes.

Product Overview

The UpStart Components Universal Remote Control is a palm-sized device featuring a standard button layout for intuitive operation. Below is an image illustrating the remote's design and key buttons.

UpStart Components Universal Remote Control, front view
Front view of the UpStart Components Universal Remote Control, showing the power button, channel and volume controls, number pad, and device selection buttons.

The remote features dedicated buttons for power, volume control, channel selection, and input switching. A numeric keypad allows for direct channel entry. Device selection buttons (e.g., TV, SAT-CBL-DTC DVD-VCR) are located at the top for easy switching between controlled devices.

Setup and Programming

1. Battery Installation

The remote requires 2 AAA batteries (not included). Open the battery compartment on the back of the remote, insert the batteries according to the polarity indicators (+/-), and close the compartment securely.

2. Programming by Code Entry

To program the remote for your device (e.g., TV), follow these steps:

  1. Turn on the device you wish to control (e.g., your Orion TV).
  2. Press and hold the SETUP button on the remote until the POWER button light turns solid red.
  3. Release the SETUP button.
  4. Press the device button you want to program (e.g., TV for your television). The POWER button light will blink once.
  5. Enter the 4-digit code for your device's brand. For Orion TV, try codes 0463 or 1463. For other brands, refer to the code list provided with your remote.
  6. If the code is entered correctly, the POWER button light will turn off. If it blinks, the code may be incorrect, or the remote may not be compatible.
  7. Test the remote by pressing the POWER button, VOLUME buttons, and CHANNEL buttons. If the device responds, programming is complete.
  8. If the remote does not work or only some functions work, repeat the process with the next code for your brand until all desired functions operate correctly.

Note: Some product feature bullets indicate "No programming needed, Just install batteries and use." However, for universal compatibility, code entry is typically required. If the remote does not work immediately after battery installation, please follow the programming steps above.

Programming Demonstration Video

This video demonstrates the code entry programming process for a universal remote. While the remote shown in the video may differ visually from your UpStart Components remote, the programming steps are generally applicable. The video illustrates how to hold the setup button, select the device type, and enter a 4-digit code to link the remote to a television.

Operating Instructions

  • Power On/Off: Press the POWER button to turn your device on or off.
  • Volume Control: Use the VOL+ and VOL- buttons to adjust the volume.
  • Mute: Press the MUTE button to silence the audio. Press again to restore sound.
  • Channel Selection: Use the CHAN+ and CHAN- buttons to change channels. Use the number pad (0-9) for direct channel entry.
  • Input/Source: Press the INPUT or SOURCE button to cycle through available video inputs on your TV.
  • Menu Navigation: Use the directional arrow buttons (up, down, left, right) and the OK button to navigate menus on your device.
  • Playback Controls: For compatible devices (e.g., DVD/VCR), use the Play, Pause, Stop, Rewind, and Fast Forward buttons.

Troubleshooting

  • Remote Not Responding: Ensure batteries are correctly installed and not depleted. Replace batteries if necessary.
  • Some Buttons Not Working: If only certain functions are not working after programming, try another code from the provided list for your device's brand. It is possible that some codes offer partial functionality.
  • Device Not Turning On: Verify that the remote is aimed directly at the device's infrared sensor. Ensure there are no obstructions.
  • Lost Programming: If the remote loses its programming, re-enter the appropriate code for your device.

Specifications

  • Model Number: RC-RCR503BZ-DL83
  • Brand: UpStart Components
  • Color: Black
  • Special Feature: Universal
  • Max Number of Supported Devices: 1 (This remote is designed to control one device at a time, switching between TV, SAT-CBL-DTC DVD-VCR modes.)
  • Compatible Devices: Television, Satellite/Cable/DTC, DVD/VCR
  • Batteries: 2 AAA batteries required (not included)
  • Manufacturer: UpStart Components
  • Date First Available: December 28, 2018

Warranty and Support

This product is an UpStart Components Brand replacement part. Any warranties for this product are offered solely by UpStart Components. For support or warranty inquiries, please refer to the contact information provided with your purchase or visit the UpStart Components website.