Green Extreme Dual Position V-Mount Li-Ion Battery Charging/Power Station User Manual

1. Introduction

This manual provides essential instructions for the safe and efficient operation of your Green Extreme Dual Position V-Mount Li-Ion Battery Charging/Power Station. This device is designed to charge two V-Mount Lithium-Ion batteries simultaneously and can also function as an external 4-pin XLR power output for compatible equipment.

Please read this manual thoroughly before using the product and retain it for future reference.

2. Safety Information

• Do not disassemble, heat above 60°C (140°F), or puncture the unit.
• Avoid short-circuits and keep away from children.
• Dispose of used batteries properly according to local regulations.
• Use only with compatible V-Mount Lithium-Ion batteries.
• Ensure proper ventilation during operation.
• Do not expose the unit to rain or moisture.
• Disconnect from power source before cleaning or when not in use for extended periods.

3. Product Features

• Dual Charging Capability: Simultaneously charges two V-Mount Li-Ion batteries at 16.8V, 2.5A each, or sequentially at 5.0A for higher capacity batteries.
• Versatile Power Station: Functions as a reliable power source with a 4-Pin XLR DC output at 16.7V, 4.5A (AC) / 15V, 4.0A (DC).
• Intelligent Power Management: Equipped with an intelligent power center that senses voltage requirements and adjusts charging flow.
• LED Indicators: Provides clear status signals for AC power, charging state, battery online, and discharging state.
• Worldwide Compatibility: 100-240 VAC power input adapts for international use.
• Stable Design: Features concealed feet that flip open to stabilize the unit and support attached batteries.
• Compact and Portable: Dimensions of 9.25 x 2.25 x 5.5 inches and a weight of 2.2 lbs for easy transport.

4. Package Contents

Please verify that all items are present in your package:

• Green Extreme Dual Position V-Mount Charger
• AC Power Cable
• 4-Pin XLR DC Output Cable

Image: The Green Extreme Dual Position Charger shown with its AC power cable and 4-pin XLR DC output cable, illustrating the complete package contents.

5. Setup

1. Unpack the Charger: Carefully remove the charger and all accessories from the packaging.
2. Connect to Power:

   Insert the AC power cable into the AC input port on the rear of the charger. Connect the other end to a standard wall outlet (100-240 VAC).

   

   Image: The rear panel of the charger, highlighting the AC power input socket and the main power switch.

3. Stabilize the Unit:

   Flip open the concealed metal feet located at the bottom of the charger to provide a stable base, especially when batteries are attached.

   

   Image: A detailed view of the charger's underside, showing one of the metal support feet extended for stability.

4. Attach V-Mount Batteries:

   Align the V-mount plate on your battery with the V-mount receiver on the charger. Slide the battery down until it clicks securely into place. The charger supports two V-mount batteries simultaneously.

   

   Image: The charger with two V-mount batteries securely mounted on its sides, ready for charging or power output.

6. Operating Instructions

6.1. Charging Batteries

1. Power On: Ensure the charger is connected to an AC power source and turn on the main power switch located on the rear panel. The "AC Power" LED indicator on the front panel will illuminate.
2. Attach Batteries: Mount one or two V-mount batteries onto the charger as described in the Setup section.
3. Monitor Charging Status:

   The "Charging state" LED indicators (one for each battery slot) will illuminate to show that charging is in progress. The charger intelligently manages the charging process:

   • For batteries up to 6.6Ah, it delivers 2.5A to twin cells simultaneously.
   • For batteries with 8.8Ah capacities or more, it ramps up power to 5A, typically charging sequentially.

   Once a battery is fully charged, its corresponding "Charging state" LED will turn off, and the "Battery online" LED may illuminate if the battery is ready for discharge or power output.

   

   Image: The front panel of the charger, displaying the LED indicators for AC Power, Charging State, Battery Online, and Discharging State, along with the 4-pin XLR DC output port.

6.2. Using as a Power Station (DC Output)

The charger can supply power to external devices via its 4-pin XLR DC output, even while charging batteries.

1. Connect Device: Connect a compatible device (e.g., camera, monitor) to the 4-pin XLR DC output port on the front panel using the provided XLR cable.
2. Power Output: The charger will provide 16.7V, 4.5A when connected to AC power, or 15V, 4.0A when operating solely on attached batteries. The "Discharging state" LED will illuminate when power is being drawn from the batteries.

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of the charger. Do not use liquid cleaners or solvents.
• Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
• Ventilation: Ensure the ventilation grilles are clear of dust and obstructions to prevent overheating.

Image: A close-up view of the ventilation grille located on the top handle of the charger, emphasizing the importance of keeping it clear for proper airflow.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information or technical support, please contact Green Extreme customer service. Refer to the product packaging or the Green Extreme website for the most current contact details.

You can visit the Green Extreme Store on Amazon for more information.