Antec P101S Silent Performance Mid-Tower PC Case Instruction Manual

1. Introduction

Thank you for choosing the Antec P101S Silent Performance Mid-Tower PC Case. This manual provides essential information for the proper installation, operation, and maintenance of your new computer case. Please read this manual thoroughly before beginning assembly to ensure optimal performance and longevity of your system.

The Antec P101S is engineered for quiet computing, featuring sound-dampening panels and efficient cooling solutions, making it ideal for users who prioritize a silent and high-performance computing environment.

2. Key Features

• Silent Operation: Equipped with sound-dampening top, front, and side panels for quiet computing.
• Extensive Drive Bays: Supports 11 drive bays, including 1 x 5.25" ODD bay, 8 x 3.5" HDD/2.5" SSD removable bays, and 2 x dedicated 2.5" SSD bays.
• Advanced Cooling: Includes 4 pre-installed 120/140mm cooling fans (3 front, 1 rear). Supports up to 4 fan mounts with a maximum of 360mm radiator support for enhanced cooling.
• Convenient I/O Panel: Features power/reset buttons, a fan speed controller (High/Stop/Low), Audio/Mic ports, 2 x USB 2.0, and 2 x USB 3.0 ports with white LED lighting.
• Broad Motherboard Compatibility: Supports E-ATX, ATX, Micro-ATX, and ITX motherboards.
• Generous Component Clearance: Accommodates CPU coolers up to 180mm, graphics cards up to 450mm, and PSUs up to 290mm in length.

3. Package Contents

Please verify that all items are present in your package:

• Antec P101S Mid-Tower PC Case
• 3 x 120mm Front Fans (Pre-installed)
• 1 x 140mm Rear Fan (Pre-installed)
• Accessory Box (screws, cable ties, user manual)

4. Component Overview

Familiarize yourself with the various parts of your Antec P101S case.

Figure 1: Front, Back, Left, and Right views of the Antec P101S case, illustrating its external design and panel layout.

Figure 2: Interior view of the Antec P101S, showing the spacious layout, drive bays, and fan mounts.

Figure 3: Close-up of the top I/O panel, highlighting the power, reset, fan speed controller, audio, USB 2.0, and USB 3.0 ports.

5. Setup and Installation

Follow these steps to install your components into the Antec P101S case.

5.1 Preparing the Case

1. Remove Side Panels: Unscrew the thumbscrews on the rear of the side panels and slide them backward to remove.
2. Access Interior: The interior is now accessible for component installation.

5.2 Motherboard Installation

1. Install Standoffs: Ensure the correct motherboard standoffs are installed for your motherboard form factor (ATX, Micro-ATX, ITX, E-ATX).
2. Place Motherboard: Carefully align your motherboard with the standoffs and I/O shield opening.
3. Secure Motherboard: Fasten the motherboard with the provided screws.

5.3 Drive Installation

The P101S offers versatile drive mounting options.

5.3.1 3.5" HDD / 2.5" SSD Removable Bays

Figure 4: Illustration of the various drive bay locations within the Antec P101S case.

1. Remove Drive Tray: Pull out an empty 3.5" drive tray from the drive cage.
2. Install Drive: For a 3.5" HDD, flex the tray and insert the drive. For a 2.5" SSD, secure it to the bottom of the tray with screws.
3. Reinsert Tray: Slide the loaded tray back into the drive cage until it clicks into place.

5.3.2 Dedicated 2.5" SSD Bays

Two dedicated 2.5" SSD mounts are located behind the motherboard tray.

1. Secure SSD: Attach your 2.5" SSD to the dedicated mounting bracket using screws.
2. Mount Bracket: Secure the bracket with the SSD to the chassis behind the motherboard tray.

5.3.3 5.25" ODD Bay

1. Remove Front Bezel: Gently remove the 5.25" bay cover from the front bezel.
2. Insert ODD: Slide your optical disc drive into the bay from the front until it aligns with the screw holes.
3. Secure ODD: Fasten the ODD with screws.

5.4 Graphics Card and Expansion Card Installation

1. Remove PCIe Slot Covers: Unscrew and remove the necessary PCIe slot covers from the rear of the case.
2. Insert Card: Carefully insert your graphics card or other expansion card into the appropriate PCIe slot on the motherboard.
3. Secure Card: Fasten the card with screws.

5.5 Power Supply Unit (PSU) Installation

1. Position PSU: Slide the PSU into its designated compartment at the bottom rear of the case.
2. Secure PSU: Fasten the PSU to the rear of the chassis with screws.

5.6 Cable Management

Figure 5: Rear view of the motherboard tray, showing cable routing channels and tie-down points for organized cable management.

Utilize the cable routing holes and tie-down points behind the motherboard tray to organize cables for improved airflow and aesthetics.

6. Operating Your PC Case

6.1 Power On/Off

Press the large power button on the top I/O panel to turn your system on or off.

6.2 Fan Speed Control

Use the fan speed controller switch on the top I/O panel to adjust the speed of the pre-installed fans:

• High: Maximum fan speed for optimal cooling.
• Low: Reduced fan speed for quieter operation.
• Stop: Fans are turned off.

7. Maintenance

7.1 Cleaning Dust Filters

Regularly clean the dust filters located at the front, top, and bottom of the case to maintain optimal airflow and prevent dust buildup. The front filter is easily removable for cleaning.

7.2 General Cleaning

Use a soft, dry cloth to clean the exterior of the case. For stubborn marks, a slightly damp cloth can be used, followed by drying. Avoid abrasive cleaners or solvents.

8. Troubleshooting

• System Not Powering On: Double-check all power connections, including the 24-pin ATX, 8-pin CPU, and GPU power cables. Ensure the PSU switch is in the 'On' position.
• Fans Not Spinning: Verify that the fan speed controller on the I/O panel is not set to 'Stop'. Check fan connections to the motherboard or fan hub.
• Overheating: Ensure all fans are spinning correctly and dust filters are clean. Verify proper component installation and thermal paste application.
• USB Ports Not Working: Check the internal USB header connections from the I/O panel to the motherboard.

9. Specifications

10. Warranty and Support

For warranty information and technical support, please refer to the official Antec website or contact your local Antec distributor. Keep your proof of purchase for warranty claims.

Antec Official Website: www.antec.com